Rockrend

Sorry to have misunderstood you. I'm not seeing the same issue, so it may not be a bug after all.

Take a look at this video but note that due to changes in the last update, the previous issue with the CW/Voice switch on the C-38 control unit have now been fixed. It should now be set to CW, as opposed to Voice. Also note that the CW/Voice switch on the C-26 must be set to Voice. This ensures you are using the preset channel/frequency on the C-38, not the manual frequency on the C-26.

Use radio 1, the AN/ARC-5 The internal profile name is F4U-1D from memory. Hopefully this helps

Good news...Seems to be fixed now with the early July patch.

This definitely used to be the case and it worked correctly, although the CW/Voice Switch was reversed on the C-38. After the last update (July) I can no longer tune to the Carrier frequency. The aircraft only picks Argana Airfield "AGA" regardless of the frequency I have entered in the ME for the carrier and aircraft, or the preset frequency setting on the C-38 Tuning Crank. Additionally, the CW/Voice Switch on the C-38 seems to not care if it is in CW or Voice position. EDIT - Ater receiving some sage advice from Discord, I realise that the previous reversal of the CW/Voice Switch on the C-38 has now been fixed. This initially caused my mistake operating the system. It appears that the navigation system works correctly.

Hi Team, I'm getting a DCS crash at roughly the same point in mission 3 of The Big Show Campaign by Reflected Simulations. I have 2 separate crash logs from trying to fly the mission on 2 occasions. Can you help me out please Thank in advance. dcs.log-20250629-093554.zip dcs.log-20250629-100651.zip

Hi Reflected, I'm getting a DCS crash at roughly the same point in mission 3. I have 2 separate crash logs from trying to fly the mission on 2 occasions. Do these go to you or should it be reported to ED? Thank in advance.

As per @PLUTON message, try setting manual fog to a thickness that is above ground level. I tried this and it works well. Thank you all for your replies. I didn't account for the elevation and with that in mind, the fog now works. Much appreciated

Hi all, As like everyone else today, I'm playing around with the new fog settings. I do have a problem where fog doesn't seem to work in the Afghanistan map. Is anyone seeing the same? It does work in other maps. Thanks in advance

Hi @Lord Vader Thanks very much for the reply. It seems that this is not yet implemented in the CH-47F module as I don't require the command to successfully sling load cargo.

Hi @Lord Vader. You seem to be fairly active in this sub forum. Can you please take a look at my question above and provide an answer. Thanks in advance.

Hi all, What is the function of the "External Cargo Hook" (RCTRL + RShift + L) binding? The sling loading training mission refers to it but I can perform sling loading without using it. Thanks in advance.

When I say "joystick controller", I mean it in terms of the name Windows gives to a devices like this, as opposed to an actual joystick. So long as you can get the switches, potentiometers and encoders, it can be done very easily. Additionally, you can definitely set Pro Micro's with unique identities. Hope this is helpful.

Hi, I've used Arduino's to build a range of button boxes, so you can definitely do what you want. As per previous advice, no need to use DCS-BIOS, just use the Arduino as a "joystick controller". See the YT link to get an idea of how to make the connections and the sketch you will use to control the device. He is using it for a car racing game but the principle is exactly the same. Good luck.

@NineLine and @BIGNEWY, could either of you please take a look and provide some information on this bug report.

Bump

Hi, Can someone from ED please take a look at this thread, check my bug report and provide feedback. It's been quite some time since it was posted. Thanks in advance.

Hi all, I've noticed a problem with CA in version 2.7.11.22211. When I switch to isometric view using the insert key and try to move the turret on MBT's (this is all I've tried so far) using the arrow keys, the turret doesn't move (it used to). I can however, move the turret with the mouse in isometric view. Everything works as normal in gunner view (turret moves with arrow keys and mouse) and when I switch to external unit view using F7, just not when switching to isometric view by using the insert key. In the attached track, you can see the turret trying to move and jerking around a little in isometric view and working normally in gunner view. Any assistance would be appreciated. I have also done a slow repair, with no change. CA test track.trk CA Test.miz

I'm seeing exactly the same behaviour from the Lightning II pod as well. It's OK when the image is zoomed out and there is a black border around the image but as soon as you zoom in, the diamond becomes very hard to see, as the green scale image becomes larger and the black border shrinks. As per the OP, this happens regardless of the contrast or brightness setting. Pls let us know if you require more info or screenshots.

Excellent...yep pretty nasty crash alright. Thanks to all that contributed. If it's of any use now, 32G RAM, i7 6700k (stop laughing), MSI NVIDIA RTX2080 Super, Win10 (latest version and current update), DCS is on a 1TB Samsung SSD, Win10 is on a 1TB M2 SSD.

Here it is. The crash is at the end of the log and it also shows some successful loads of the same mission, prior to the crash. The mission is also attached. No mods or edits and I also tried a slow repair. As I said, the crash doesn't always happen and I haven't been able to identify what exact action precedes the crash on my part either. Hopefully the log and mission will shed some light on the subject. Thanks... dcs.log.old FW 190 A-8 Takeoff.miz

My apologies…For some reason I couldn’t find the attach file button at the time of posting. Thanks very much for your input, it is appreciated. Hopefully your information will cast further light on the cause of the crash.

Just recently my Anton has been crashing DCS upon hitting "fly". It doesn't do it all the time and I can't seem to identify exactly what circumstances lead to the crash. Please find the log and mission below...https://forums.eagle.ru/topic/292315-anton-crashes-dcs/?do=findComment&comment=4884921 Possibly something to do with the sound, that seems to be the last thing that happened before the crash. I'd appreciate some assistance or insight into the cause. Thanks...

Hi Chuck, Ive found this on a kit modellers forum. The discussion explains what it could be and the associated hardware. https://rnzaf.proboards.com/post/275572/thread BTW…thanks for all of your work, it is an excellent resource.

There would have been a range of navigation beacons located all over that part of England during WW2, all with different frequencies and Morse idents. Also, each airfield would have been likely to have several navigation beacons in its vicinity at different times. You may actually find it’s easier to just setup your own. If you want the current details for airfields in 2021, the UK AIP can be found at www.caa.co.uk