NightFlier

Bringing this up and making it simple: After a bandit trashes our missile, I noticed that Jester just stops doing his duty. He knows the bandit is now low and cold or flanking but he just drop the search. I found the bandit turning hot at 15-10 nm lower than me and Jester was doing nothing even if the bandit started to descend at 20 nm when the Phoenix went pitbull. I tried to tell Jester to scan low or scan low-middle to find him but it takes precious seconds to open the wheel at that stage. We need a smarter Jester for close in situations. Sanitizing the airspace far from the threats is ok, we have time to tell Jester what we want but after the first launch and a short skate, there's no time to open the wheel and start playing with options while manoeuvring...

We can try but I seriously doubt it's the mod as it's been there before without any issue and other users are having the same problem without this mod (but with other mods). It will take time because it was happening randomly...so we need to wait for other same condition tests.

Asking on Tomcat's Alley on Discord I found another guy who had the same issue, same Map (Mariana Islands). About the wing configuration, he said he isn't sure it was 68° but definitely swept back a good bit.

I'm sure, no AP engaged in both cases Even if it was on, there's no reason for the aircraft to explode! I mean, it wasn't a hard pull at Mach 1 throwing the wings off, it was a complete total explosion with small oscillations (but abnormal ones).

The only mod in the mission is Military Aircraft Mod but I don't think this is an issue as you experienced the same problem without this mod installed. I need to check the turbulence setting cause I don't remember if it's on or off. No AP engaged during a left turn at 350 knots in formation at 800 ft....we aren't chicks Anyway, you need MAM (Military aircraft mod).

Hi guys, In the past 2 weeks I've had this issue twice: - Mariana Islands, Multiplayer, same Mission (this mission has been running for at least a month before the issue happened). - During Case 1, flying in formation with wings at 68° at the commencement phase (descending to 800 ft at 350 kts outbound) the airplane started to oscillates abnormally in pitch and got a pilot lock out of 1 second followed by vibrations. - The first time it happend to me and I recovered normal flight conditions after about 3 minutes. - The second time happend to another client while flying in formation with me, he got the same problems but eventually it exploded shortly after. Same phase of flight, same mission. What I don't get is also why we flew the same pattern before and nothing happened (I mean, 5 minutes before). Here is the track file: https://drive.google.com/file/d/1judTdqyt0Zlk8K_STBBD34GUe5TB0KbP/view?usp=sharing

Hi everyone, I was wondering if HB is considering adding tie down chains when the F-14 is static and linked to a Carrier by the Mission Editor. It would give a realistic naval picture of the deck I don't want to underestimate the work required but it seems a small job giving a great outcome. Cheers NF

Many thanks Flappie

I'll do that tomorrow morning, but as fas as I can see, your screen is about your skin as a client, the issue is on AI aircrafts.

I already checked the server option and skins can be changed (the option is ticked). The second issue isn't the case as I double checked which skin is selected and showed in ME and in mission. I even tried to change skin and reselect the one I want, saved the mix and launched it in Multiplayer...still the issue is there. It's like the dedicated server lacks of default skins. Have you been able to replicate the problem?

I selected one of the Tophatters on the F-14A and tried the Vandy VX-4 too and it reverts to the Jolly Rogers. I tried the "Fifth-Fifth" on the F-16 and it reverts to the Gamblers. All of them are original skins coming with the module. I'm not the only one having this issue, actually all of the people I talk to about this are having the same (different servers, not a same group of pilots) PS: skins added from third parties works perfectly. It just does that with original skins.

I got the idea because my internet connection sucks a lot, I mean really a lot!

I'm a basic man Folders, beer and chicks

A quick workaround is to: - CUT the folder "Mirage F1" from DCS Main Folder\Mods\Aircraft and copy that in a safe place (backup folder you prefer). - Run Kneeboard Builder and do whatever you need to do; - When finished, put the Mirage F1 folder back where you cut it. In this way you avoid installing and reinstalling via DCS.

I get the same, I also have the F1

Hi, I noticed that AI aircrafts are not keeping the skin selected in Mission Editor when flying the mission on a server (NOTE: selected skins are skins of the module, not third party skins) If launched as Single Player it works (both from Missions and from ME) but it doesn't when launched in Multiplayer. Aircrafts reverts to default skins. It doesn't have any issue on Statics, it just does that on AI aircrafts. PS: skins added that are non part of the default module's skins are visible with no issues.

I bring up this thread because I'm really interested in having this option available. It could be just a checkbox in the Mission Editor and it would be useful for the upcoming Iranian version too, as they usually fly without cover and the probe permanently extended.

Shall we expect a proper update about this kind of issues? AAR is very important and the AI is a significant part of this simulator, it should be fixed and upgraded with a proper approach to the tanker, radio comms and coordination by the AI. It doesn't seem a huge and complicated problem to have it working properly.

Hi guys, I'm setting up a mix where along the route a mix of human flown and AI aircrafts meet at the tanker for AAR. Even if we are the first at the tanker and we are going to connect to the drogue, the AI doesn't care and position themselves behind us, flying weirdly (probably because the need to "avoid" a collision with us). I tried to create a trigger using Moving zone etc. but I got no results. Even without any "Refueling" command (so just a simple route ending close to the tanker, the AI goes to the tanker (fuel is still good, around 70%) and wants to refuel anyway! Any suggestion? I know I can wait for them to refuel and then do ours, but the issue is that we, humans, are not going to meet at the tanker at the same time so it can happens that we start the refuel and the AI arrives in the middle of our operations forcing a flight to move from the position etc. etc.

@Mistermannmany thanks mate! I'll go through that soon @sirrahI know that, I don't like the robotic voices that comes with Windows. I'm actually using trials on different websites with some professional voices but it would be great if someone able to enhance that generator tried to update it.

Many thanks! I will try but I'm at a very low level in audio editing so I would need "step by step" instructions on what to select and which filter to apply using Audacity

Thanks for your reply What I'm aiming for is just to create a good Radio Effect. I'm not looking to act or even talk with my own voice I use Text to Speech websites to make voice overs so what I need is a good Radio (possibly UHF) effect to get a good result when listened in game

Hi guys, I'm looking for some good hints on how to make realistic voice overs. I've been using Audacity for a while now and I made some voice overs using filters but I'm still looking for the best results. I really like the Zone 5 Campaign voices and I'm trying to replicate the effect but it's not easy and I'm not an expert sound editor. Any suggestion is appreciated Thanks

UPDATE 3: Combined crash during a MP mission: DCS Crash + SRS crash + Discord freeze. It happened to 2-3 of us in this way while others had DCS crashes or not able to join the mission with no reason. (mission already played days before with no issues). What could cause 3 programs (DCS, SRS and Discord) to crash at the same time? # -------------- 20220401-213546 -------------- DCS/2.7.11.22041 (x86_64; Windows NT 10.0.19043) C:\WINDOWS\SYSTEM32\VCRUNTIME140.dll # C0000005 ACCESS_VIOLATION at D16A1989 00:00000000 SymInit: Symbol-SearchPath: '.;C:\Program Files\Eagle Dynamics\DCS World OpenBeta;C:\Program Files\Eagle Dynamics\DCS World OpenBeta\bin;C:\WINDOWS;C:\WINDOWS\system32;SRV*C:\websymbols*https://msdl.microsoft.com/download/symbols;', symOptions: 528, UserName: 'DAVIDE' OS-Version: 10.0.19043 () 0x100-0x1

Yes I have, I downloaded it from the link in post 1. I see the 3d powerline worker model but it's without textures