Strale
-
Posts
71 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Strale
-
First it's not a FFB but should or it's declared to be a tactile feeedback (teoretically the grips should "tremble" but only in some particular situations ... for example during a Stall) anyway even if in the software i set the force at maximum so far i didn't experienced any "trembling" on my hand. I got the throttle with the default firmware and also the cut-off and aftburner switches were not responding .. update to latest available firmware and, at least, they're working think the tactile feedback will be implemented as for now i didn't experience it.
-
I got it regardless some not completely nice reviews. against the WW (orion1 that i still have) and TM (that was sold a couple of years ago) I have to admit that the very bad thing about this throttle is the afterburner detent. The unit is sold with 3 installed detent, Cut-off, one in the middle i really don't have any clue of the meaning, and the afterburner. I immediately removed the center one, moved a little bit aft the cut-off and i'm satisfied with it. Main issue is the Afterburner. The AFT are engaged at approximately the 30/35% of the travel on the detent... making it completely useless. you could of course play with the curves but you will loose a good amount of travel... so actually no joy ! I read somewhere that the problem can be easily fixed with a dremel and cutting part of the aft detent which for the moment i don't have any intention to do. I addressed Moza's customer support and they were very kind and quick on answer but so far no news from them. What i like most of this throttle is that eventually they avoided to put switches on the righs side of the throttle's handles and that will be usefull when i will install into the pit. TM and WW shifted too much of the left the throttles grip just to put switches and making ergonomics very very bad. If someone ever made a 3D custom detent for it i would have interest to try it.
-
Sent you a PM but never got an answer. Can you check your incoming messages ?
-
PM incoming.
-
Evaluating trade with a Joystick
-
with UPS cost is 35/40 Euros (quick delivery) with Italian Postal service (same service as the old USPS Priority) could be around 20/25 if you're interested in, as they're here laying, i can make a sweeter deal with a little discount.
-
up
-
up
-
UP still available.
-
Still available ! open to Fair offers
-
BUMP
-
Still available
-
UP, considering also trade with parts for my cockpit
-
Following
-
If you're going to split and ship in EU i might be interested in the DUAL SF-COLLECTIVE GRIP (AH-64) If you're willing to sell i'll consider
-
Come on ! they work perfectly and ready to go.
-
Not at all ?
-
As advertised here on sell 2nd generation Cubesim MFD that were mounted on the Coutronics Mip that has been sold The displays come with Cubesim's Bezels (not TM one) and i will provide also the *lua file for the F-16, F-18, AV8B, A10C and A10CII and the instruction manual. The color of the buttons can be modified with simple key combination on the bezels. Each bezel has to be configured always via key press combination to reflect the position of it on the virtual cockpit. Actually they're just configured and each display has on the back a letter showing which is the left, the right and the center one. the DDI have 3d printed outer bezel to depict the F/A-18 DDis The AMPCD has a custom 3D printed riser to allow a better position Last picture shows the DDIs in place in my old rig. retail price for these parts is 672 USD (today 610 Euros) before shipment and taxes READY to sell at 250 € + shipping and paypal fees. Cables and adaptors not shown but included
-
Any sketch available for the std by gauges as ASI, ALT and VVI for the F-18 to be used with Qualia ?
-
As per title here on sell a complete Main Instrument Panel from company Coutronics (now Dogfight Dynamics) this panel was bought early 2023 and it's compatible with all TekCreations panels and Cubesim MFDs (that in case are also available) This sell includes Coutronics FULL MIP (706 € + 22% Vat = 861,32 + shipment 42 Euros) - Invoice available TrackRacer mount (to mount the MIP on vertical alu profile (discontinued it was about 129 Euros) Master Arm Enclosure (free) IR/Cool Enclosure (Free) Waveshare 10,1 TFT Display Panel for the std by gauges (80,32 + 22% VAT = 97.99) Invoice available for warranty So total money i spent on it was 1130 Euros Looking for 700 Euros + paypal fees Shipment in Europe INCLUDED AVAILABLE, on request, A full set of CUBESIM MFDs and Bezels (cubesim one not thrustmaster) with 3d printed bezel's parts Pictures attached are actual parts on sell and one picture is with all the other items installed that are not on sell out the Cubesim MFDs and Bezels
-
Thanks Vinc, it made me running mad for a while but eventually find a post suggesting to downgrade the board manager to version 2.017 and all worked flawlessly. now would be great to know if someone is writing the codes for the small std by gauges (ASI, ALT and VVI) seems a good way to replicate those instrument without having to deal with complex mechanisms. @BaronVonVaderham Don't have any clue though, i just had a try at it and yes ... sometimes there are some delays but i would not know how to solve it. Maybe @Tanarg or @Vinc_Vega could help out.
-
#SOLVED - SOLVED - SOLVED# the error was generated by the updated board manager of Arduino IDE. GFX libraries seems still not upgraded so the way is to downgrade Arduino Ide Board Manager to v. 2.0.17 Now it's working ! IMG_0206[1].MOV
-
@Tanarg Hi there, i feel confused and really don't know what to do else. installed all the libraries, put the board into bootloader, choosed the right comport I think i followed all the instruction correctly but still facing a Compilation Error ******************************************* ATTENZIONE: la libreria Servo dichiara di funzionare sulle architetture avr, megaavr, sam, samd, nrf52, stm32f4, mbed, mbed_nano, mbed_portenta, mbed_rp2040, renesas, renesas_portenta, renesas_uno e potrebbe non essere compatibile con la tua scheda che utilizza l'architettura esp32 In file included from c:\Users\ME\Documents\Arduino\libraries\DCS-BIOS_FP-Fork\src/internal/Servos.h:6, from c:\Users\ME\Documents\Arduino\libraries\DCS-BIOS_FP-Fork\src/DcsBios.h:129, from C:\Users\ME\Documents\Arduino\F_18_RALT_Gauge_Qualia_FP\F_18_RALT_Gauge_Qualia_FP.ino:7: C:\Users\ME\AppData\Local\Arduino15\libraries\Servo\src/Servo.h:79:2: error: #error "This library only supports boards with an AVR, SAM, SAMD, NRF52 or STM32F4 processor." 79 | #error "This library only supports boards with an AVR, SAM, SAMD, NRF52 or STM32F4 processor." | ^~~~~ exit status 1 Compilation error: exit status 1 ***************** I also added the #define DCSBIOS_DISABLE_SERVO but still no joy
