Strale
-
Posts
71 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Strale
-
First it's not a FFB but should or it's declared to be a tactile feeedback (teoretically the grips should "tremble" but only in some particular situations ... for example during a Stall) anyway even if in the software i set the force at maximum so far i didn't experienced any "trembling" on my hand. I got the throttle with the default firmware and also the cut-off and aftburner switches were not responding .. update to latest available firmware and, at least, they're working think the tactile feedback will be implemented as for now i didn't experience it.
-
I got it regardless some not completely nice reviews. against the WW (orion1 that i still have) and TM (that was sold a couple of years ago) I have to admit that the very bad thing about this throttle is the afterburner detent. The unit is sold with 3 installed detent, Cut-off, one in the middle i really don't have any clue of the meaning, and the afterburner. I immediately removed the center one, moved a little bit aft the cut-off and i'm satisfied with it. Main issue is the Afterburner. The AFT are engaged at approximately the 30/35% of the travel on the detent... making it completely useless. you could of course play with the curves but you will loose a good amount of travel... so actually no joy ! I read somewhere that the problem can be easily fixed with a dremel and cutting part of the aft detent which for the moment i don't have any intention to do. I addressed Moza's customer support and they were very kind and quick on answer but so far no news from them. What i like most of this throttle is that eventually they avoided to put switches on the righs side of the throttle's handles and that will be usefull when i will install into the pit. TM and WW shifted too much of the left the throttles grip just to put switches and making ergonomics very very bad. If someone ever made a 3D custom detent for it i would have interest to try it.
-
Sent you a PM but never got an answer. Can you check your incoming messages ?
-
PM incoming.
-
up
-
UP, considering also trade with parts for my cockpit
-
Following
-
If you're going to split and ship in EU i might be interested in the DUAL SF-COLLECTIVE GRIP (AH-64) If you're willing to sell i'll consider
-
Not at all ?
-
Any sketch available for the std by gauges as ASI, ALT and VVI for the F-18 to be used with Qualia ?
-
As per title here on sell a complete Main Instrument Panel from company Coutronics (now Dogfight Dynamics) this panel was bought early 2023 and it's compatible with all TekCreations panels and Cubesim MFDs (that in case are also available) This sell includes Coutronics FULL MIP (706 € + 22% Vat = 861,32 + shipment 42 Euros) - Invoice available TrackRacer mount (to mount the MIP on vertical alu profile (discontinued it was about 129 Euros) Master Arm Enclosure (free) IR/Cool Enclosure (Free) Waveshare 10,1 TFT Display Panel for the std by gauges (80,32 + 22% VAT = 97.99) Invoice available for warranty So total money i spent on it was 1130 Euros Looking for 700 Euros + paypal fees Shipment in Europe INCLUDED AVAILABLE, on request, A full set of CUBESIM MFDs and Bezels (cubesim one not thrustmaster) with 3d printed bezel's parts Pictures attached are actual parts on sell and one picture is with all the other items installed that are not on sell out the Cubesim MFDs and Bezels
-
Thanks Vinc, it made me running mad for a while but eventually find a post suggesting to downgrade the board manager to version 2.017 and all worked flawlessly. now would be great to know if someone is writing the codes for the small std by gauges (ASI, ALT and VVI) seems a good way to replicate those instrument without having to deal with complex mechanisms. @BaronVonVaderham Don't have any clue though, i just had a try at it and yes ... sometimes there are some delays but i would not know how to solve it. Maybe @Tanarg or @Vinc_Vega could help out.
-
#SOLVED - SOLVED - SOLVED# the error was generated by the updated board manager of Arduino IDE. GFX libraries seems still not upgraded so the way is to downgrade Arduino Ide Board Manager to v. 2.0.17 Now it's working ! IMG_0206[1].MOV
-
@Tanarg Hi there, i feel confused and really don't know what to do else. installed all the libraries, put the board into bootloader, choosed the right comport I think i followed all the instruction correctly but still facing a Compilation Error ******************************************* ATTENZIONE: la libreria Servo dichiara di funzionare sulle architetture avr, megaavr, sam, samd, nrf52, stm32f4, mbed, mbed_nano, mbed_portenta, mbed_rp2040, renesas, renesas_portenta, renesas_uno e potrebbe non essere compatibile con la tua scheda che utilizza l'architettura esp32 In file included from c:\Users\ME\Documents\Arduino\libraries\DCS-BIOS_FP-Fork\src/internal/Servos.h:6, from c:\Users\ME\Documents\Arduino\libraries\DCS-BIOS_FP-Fork\src/DcsBios.h:129, from C:\Users\ME\Documents\Arduino\F_18_RALT_Gauge_Qualia_FP\F_18_RALT_Gauge_Qualia_FP.ino:7: C:\Users\ME\AppData\Local\Arduino15\libraries\Servo\src/Servo.h:79:2: error: #error "This library only supports boards with an AVR, SAM, SAMD, NRF52 or STM32F4 processor." 79 | #error "This library only supports boards with an AVR, SAM, SAMD, NRF52 or STM32F4 processor." | ^~~~~ exit status 1 Compilation error: exit status 1 ***************** I also added the #define DCSBIOS_DISABLE_SERVO but still no joy
-
FFBeast Joystick und Rudder und Throttle und Collective
Strale replied to SDPG_GVL224's topic in For Sale
Really nice stuff !!! -
Thanks VInc, i was thinking that upgrading to original Arduino was the right choice but hell i can upload the sketch but even if i see the code changing when pressed a switch it doesn't do anything in the virtual cockpit. That's a shame Thanks UPDATE I know the rule but sometimes i loose myself ! Think twice .. buy Once ! Indeed NANO EVERY, against the statements on Arduino web store, are not compatible with Nano Sketches at least while using DCSBIOS ! I returned the board to Arduino and waiting for a full refund. Next time i'll write the rule on a post-it and place it on my monitor.
-
Hi Vinc, one year from this post, did you have the chance to try those every ? I'm having problems with them, same code of a clone nano, uploaded, connected directly to USB i see the code and also the change of code when i press one switch but in the virtual cockpit it doesn't happen anything ! Really weird as they say it's compatible with nano. Thanks for any suggestion.
-
Olivier, that's really a nice FDR !
-
Well i have 2 different USB Hubs, both ORICO and both powered. one is 7 port the other is 13 ports with supplier that can deliver 5Amp. so not thinking to an Hubs problem
-
Holy Crap ! it happens to surf some pages and finding an old friend ! Nice to see you're still "alive and kicking" and that you didn't left the party !
-
Ciao puoi mandarmi le foto di Orion 2 + Damper, Cam and Springs kit + F/A-18 Grip -> 300 euros E se puoi anche della parte della base per vedere se riesco a montarla sul mio setup ? mi stai tentando Ciao
-
Heiling, which type of USB 2.0 Hub did you buy ? thanks
-
Did you solve ?
-
I don't have any bodnar boards connected, have on the MOBO 4 USB 3.1, 1 USB 3.2 and 2 USB 2.0 but they're not enough so i'm also running a 7 port ORICO Usb 3.0 powered HUB where i connected all the hotas and track-ir then a 12 port Orico USB 3.0 powered HUB where I connected teh AN/ALR and the PSI indicator. Also tried a startech 7 port usb powered external hub but same results. I ha to remove a 2 years Orico 5 port 3.0 usb pci-e board that was using a Via chipset that was probably conflicting and often showing the yellow triangle in device manager. Will try to buy a brand new PCI-e board and trying if i can get rid of those external hubs ... even if the ECM Brain is giving troubles too and it's connected to the usb on the mainboard.
