My home mini cockpit by padonis.

Thanks! But i think i'm stock with my TM1637 .h .... i need different code for it ...

Test my CMSP panel :

What display is this ?i'm experiment with 16x2 , everything work but there is delay about second .Using LiquidCrystal L2c library and default serial . I see there is no latence on yours ...

I am using the <LiquidCrystal.h> library https://www.arduino.cc/en/Reference/LiquidCrystalConstructor . I am using this library for both 2x16 and 2x20 displays.

You are probably using the LM1602 Module. I have this panel, without this module, and I link it so.

https://smartrobots.pl/additional_images/1602LCD2.jpg

I am using the <LiquidCrystal.h> library https://www.arduino.cc/en/Reference/LiquidCrystalConstructor . I am using this library for both 2x16 and 2x20 displays.

You are probably using the LM1602 Module. I have this panel, without this module, and I link it so.

https://smartrobots.pl/additional_images/1602LCD2.jpg

If this possible that this module give me this latency , about 1 second of refresh screen? I'm using LiquidCrystal I2C library

i d'ont know how , but input lag was gone somewhere :)

Can you recommend how to paint ? yesterday i was paint 4 panels ... and i didn't like results ...

https://farm5.staticflickr.com/4451/23714517088_60be7a1d9e_k.jpg' alt='23714517088_60be7a1d9e_k.jpg'>22343739_10210418321239716_1417249147_o by Gennadii Petrovskyi, on Flickr[/img]

I do not paint, engraver laminate is already in the selected color.

Test my CMSP panel :

 

[ATTACH]170351[/ATTACH]

Sry for nitpicking:

The label of the switch down-left should be MWS - not NWS.:cry:

Actually, there is a mistake, thank you. I do not know why this happened. Fortunately, the next panel will do the patch.

Not only me :)

https://forums.eagle.ru/showthread.php?t=82399

http://farm8.staticflickr.com/7007/6389272933_b81e4b73f4_b.jpg

Don't worry too much about it.

Keep up with the work: I like following the development of your pit. :thumbup:

I really like it. Well done, sir!

Thanks :) . Engraved plate already purchased, I will make a new front with "MWS", the project has already been improved.

NMSP has been installed on its destination :) . Where to put CMSP still do not know, there is not enough space on the desk ...

You know what needs to be done sir.

Drop the mini from your title and build a pit, you have the parts!!

Wow, perfect, I want to do a cockpit like that. Compact but functional. Great work!

Possible, but not so bad, this is an emergency take-off - the threat of damage during take-off :)

 

 

@=Pedro= - oj tam, oj tam, pozdrawiam :)

 

 

@ Lobinjaevel - high res pictures :

 

 

https://images81.fotosik.pl/338/f1898b0c48e4164f.jpg

 

https://images84.fotosik.pl/357/5f5f00589617e454.jpg

 

https://images81.fotosik.pl/249/e55aeb095dba15a8.jpg

 

https://images75.fotosik.pl/859/4705cbbe59dbc8e1.jpg

 

https://images81.fotosik.pl/431/cf62d18b7a56d9d4.jpg

 

https://images82.fotosik.pl/431/e9584d5c08cce62d.jpg

Padonis,

In Pic number two I see you've built the VHS Radio. This is the exact radio I'm doing research to build myself. I noticed you have it all encapsulated. Where did you get the backing to fit your face place. Also, I'm going to be using the MAX7249 to drive the Seven Segment displays. What parts did you use to build that radio ?

I hope I remember well.

"What parts did you use to build that radio ? "

- Arduino Mega

- display 7-segment, common elektrode - anoda

https://www.tme.eu/gb/details/opd-d5630ly-bw/double-led-displays/opto-plus-led-corp/

https://www.tme.eu/gb/details/opd-s4030ly-bw/single-led-displays/opto-plus-led-corp/

https://www.tme.eu/gb/details/opd-s5620ly-bw/single-led-displays/opto-plus-led-corp/

https://www.tme.eu/gb/details/mba02040c2200fct00/04w-metal-film-tht-resistors/vishay/

- standard encoders and potentiometers

https://www.tme.eu/gb/details/ec11b15202/incremental-type-encoders/alps/ec11b15202aa/

https://www.tme.eu/gb/details/pec11r-4215k-s0024/incremental-type-encoders/bourns/

https://www.tme.eu/gb/details/t16sh-10ka/carbon-single-turn-axial-potentiometers/piher/t16sh-m04n103a2020mta/

- knobs

https://www.tme.eu/gb/details/a2416040/shaft-potentiometers-knobs/okw/

https://www.tme.eu/gb/details/a2431068/shaft-potentiometers-knobs/okw/

https://www.tme.eu/gb/details/a2513068/shaft-potentiometers-knobs/okw/

- rotary switches, push-button end toggle

https://www.tme.eu/gb/details/ck1032/rotary-switches/lorlin/

https://www.tme.eu/gb/details/ck1031/rotary-switches/lorlin/

https://www.tme.eu/gb/details/1ms5t1b1m1qe/toggle-switches/ninigi/https://www.tme.eu/gb/details/ps10b2bk/push-button-switches/ninigi/

"I noticed you have it all encapsulated." - I do them myself https://forums.eagle.ru/showpost.php?p=3258934&postcount=48

I installed all the panels in their places, it is not perfect but comfortable for me.

The error in the NWS subtitle has been corrected on MWS.

The new deflector flap indicator position opened the way for the fuel level indicator on the other side of the monitor.

I'm going back to work ... I was not to build more panels anymore - now I have to build !@#$%^%&^%

Thats one of the best desktop setups ive seen, very tidy.

Net curtains though mate, bit 80's.....

Every pilot should have net curtains as standard in his cockpit to prevent the enemy seeing him as a last ditch counter measures option, plus he can look through the gap to keep an eye on his wingman without him noticing.

Every pilot should have net curtains as standard in his cockpit to prevent the enemy seeing him as a last ditch counter measures option, plus he can look through the gap to keep an eye on his wingman without him noticing.

:megalol:

You do not know each other ... It's not a veil, it's ultra-modern masking. I bet you can not guess that it was a real plane, not an apartment. :)

And again I did something, I could not stand idle.

This time for the F-18, I made a lever for lowering the hook and two panels. One is the panel on which I made the most-needed switches.

Panel with backlight on. Of course, the buttons are illuminated.

Very cool Padonis. Keep on the good work

Small update. I made a SPIN switch, a small test and it will be painted properly.