[FIXED] TERNAV not functioning properly in 2.5.3.24436

I have been revisiting the Viggen and was flying some training sorties.

I have noticed that i never get mode 5 in ternav even though im within parameters (less than 500m and flight pan fixed). It is typically showing 0 and occasionally 2 or 3 but never 5.

So i rolled back to stable 2.5.3.23225 and presto its working just fine and as expected.

Im going to revisit the other patches and see which one it broke in

EDIT: It appears that it was broke in DCS 2.5.3.23954 and up

Same.

I also display 0 in flight when the TERNAV system is on. Shouldn't it be at 2 as the lowest setting?

+1

Noticed that during red flag campaign recently, and on Caucasus as well!

I can turn it OFF by using 581, and turn it ON by using 580, but if its ON it does the thing described above.

+1

I'm not seeing 5 at all now. Do we have to turn TERNAV on as part of start-up now?

TERNAV is on by default. It does not get beyond mode 2 (rough search) or 3 (fine search). In NAV mode it should go to mode 5 (position determined and sending fixes), but that never happened.

You can turn off TERNAV now (TAKT/IN 581). However turning off the radar altimeter does not cause TERNAV you jump to mode 0 (inoperable), which is what I would have expected.

I have been revisiting the Viggen and was flying some training sorties.

I have noticed that i never get mode 5 in ternav even though im within parameters (less than 500m and flight pan fixed). It is typically showing 0 and occasionally 2 or 3 but never 5.

 

So i rolled back to stable 2.5.3.23225 and presto its working just fine and as expected.

Im going to revisit the other patches and see which one it broke in

 

EDIT: It appears that it was broke in DCS 2.5.3.23954 and up

I can confirm this. I see '0' 99.9% of my flight time. Now and then I might get a '1'.

Thanks for the report. Fix will be in next patch (Wednesday).

Thanks for the report. Fix will be in next patch (Wednesday).

Thanks! :thumbup:

Thanks for the report. Fix will be in next patch (Wednesday).

Thank you for the quick turnaround

Anyone still experiencing this? Did some Viggen action online tonight and couldn't get it out of "1". I went TAKT "581" to turn it off ("0"). That worked, but then with TAKT "580" and "581" I couldn't get it back on.

Anyone still experiencing this? Did some Viggen action online tonight and couldn't get it out of "1". I went TAKT "581" to turn it off ("0"). That worked, but then with TAKT "580" and "581" I couldn't get it back on.

erm ... isn't the last "581" too much?

was just trying them both to see if I could get anything out of the computer

The original report was from the open beta, which has since been merged with stable about a month or two ago. I can confirm TERNAV functions properly in stable.