Search the Community

I have been using Trackir 5 pro for over ten years, and since Trackir was finally killed, a few months ago I started looking for his successor. I found 3 videos introducing Aimxy on youtube, one of which was produced and released by the famous Grim Reapers: https://www.youtube.com/watch?v=87BxAVoE560 The other is: https://www.youtube.com/watch?v=5IdYI5BPsXU And a very short demo https://www.youtube.com/watch?v=DwVLeAkz_ew The Amazon link is: https://www.amazon.com/dp/B0CYKFDWXN You can see many people’s comments on the link I purchased: https://www.amazon.com/dp/B09X7FQJHZ If you're in Europe, you can buy it here: https://www.amazon.de/gp/product/B0CQNPM7TJ Before buying, I tried some interesting solutions, such as ViewTracker and Beam Eye Tracker on Steam, the mobile app SmoothTrack, and Opentrack's neuralnet, and finally, I even bought a Tobii5. Although they all do not need to wear anything on the head, they all have problems with insufficient accuracy and too much lag. None of them can come close to the experience of Trackir. Finally, I purchased an AimxyZ. After receiving the product, I opened the product’s official website: http://z.aimxy.com Downloaded and installed the software, and adjusted AimxyZ according to Manual. Since I wear glasses, I placed it in the lower right corner of my screen as the instructions suggest. AimxyZ only requires CPU and not GPU. My computer CPU is 12900 without K. When AimxyZ's engine is set to the maximum, Lag will be the least. Then on the Config page, reduce the Smooth of Rotation and Position to 1-2. I feel that my AimxyZ is working like Trackir, but I don’t need to wear anything, and I won’t lose sensing because the head angle is too large. , and the sensing will not be interrupted due to collision between two points of the light holder at a specific angle. In particular, the AimxyZ can be used in darker environments. I only have a low-bright desk lamp turned on in my room, but the AimxyZ works very well without any issues. Because using the camera and starting the software requires an Internet connection, some people may be worried about privacy issues. I did a test according to the plan introduced by others: "I ran Wireshark capture to see if there was anything sending back to the server, but there was none. Which means you can play without the internet as long as you pass the first "validation" process." I really like the feeling of high precision, high sensitivity, and low Lag without wearing anything. Although I am also using VR to play DCS now, I use AimxyZ more often. I sincerely recommend this product to everyone. Disclaimer: I have not received any promotional fees from Aimxy, and they do not seem to have any active overseas marketing plans. I just hope more people can use this fantastic product.

I have been using Trackir 5 pro for over ten years, and since Trackir was finally killed, a few months ago I started looking for his successor. I found 3 videos introducing Aimxy on youtube, one of which was produced and released by the famous Grim Reapers: https://www.youtube.com/watch?v=87BxAVoE560 The other is: https://www.youtube.com/watch?v=5IdYI5BPsXU AimxyZ Instruction Video https://www.youtube.com/playlist?list=PLdUnDP95-lOD-porFgKimV4UAMvPYuqcm The Amazon link is: https://www.amazon.com/dp/B0CYKFDWXN You can see many people’s comments on the link I purchased: https://www.amazon.com/dp/B09X7FQJHZ If you're in Europe, you can buy it here: https://www.amazon.de/gp/product/B0CQNPM7TJ Before buying, I tried some interesting solutions, such as ViewTracker and Beam Eye Tracker on Steam, the mobile app SmoothTrack, and Opentrack's neuralnet, and finally, I even bought a Tobii5. Although they all do not need to wear anything on the head, they all have problems with insufficient accuracy and too much lag. None of them can come close to the experience of Trackir. Finally, I purchased an AimxyZ. After receiving the product, I opened the product’s official website: http://z.aimxy.com Downloaded and installed the software, and adjusted AimxyZ according to Manual. Since I wear glasses, I placed it in the lower right corner of my screen as the instructions suggest. AimxyZ only requires CPU and not GPU. My computer CPU is 12900 without K. When AimxyZ's engine is set to the maximum, Lag will be the least. Then on the Config page, reduce the Smooth of Rotation and Position to 1-2. I feel that my AimxyZ is working like Trackir, but I don’t need to wear anything, and I won’t lose sensing because the head angle is too large. , and the sensing will not be interrupted due to collision between two points of the light holder at a specific angle. In particular, the AimxyZ can be used in darker environments. I only have a low-bright desk lamp turned on in my room, but the AimxyZ works very well without any issues. Because using the camera and starting the software requires an Internet connection, some people may be worried about privacy issues. I did a test according to the plan introduced by others: "I ran Wireshark capture to see if there was anything sending back to the server, but there was none. Which means you can play without the internet as long as you pass the first "validation" process." I really like the feeling of high precision, high sensitivity, and low Lag without wearing anything. Although I am also using VR to play DCS now, I use AimxyZ more often. I sincerely recommend this product to everyone. Disclaimer: I have not received any promotional fees from Aimxy, and they do not seem to have any active overseas marketing plans. I just hope more people can use this fantastic product.

ED, first of all 2021 look to be an amazing year for you guys and the community, Please can I make one small request please, can you please allow the users of the Tobii 4 and 5C to have full 6DOF in cockpits, by default only head and eye-tracking with 3dof, but you are unable to lean in and out. the eye trackers are capable to do this function, as is the engine because TrackIR and similar products do it, let alone VR. I understand this won't be an overnight task as your dev schedule is pretty full, but if it could at ;least be considered, you'd make some Tobii owners very happy!

Wouldn't it be wonderful to implement hand tracking from quest 2 to DCS to interact with your own hands on buttons and MFDs? It would be a game changer to enjoy VR even more!! We need this to get to the higher bosses, I think it's an incredible idea!! PD: I saw some options on YouTube but they seemed expensive or did not work very well. PD: I saw some options on YouTube but they seemed expensive or did not work very well. ----------------------------------------------------- Not so precise... ------------------------------------------------------ Expensive

Hello DCS a10 users Can anyone tell me what device they are using on their hands in these videos to reach into the cockpit in VR and control the dials and buttons while in VR with their fingers? 355th Training Squadron implementing a new A-10 Thunderbolt II virtual reality simulator lab video: same video multiple times showing finger controllers: 355th Training Squadron implementing a new A-10 Thunderbolt II virtual reality simulator lab time 38 355th Training Squadron implementing a new A-10 Thunderbolt II virtual reality simulator lab time 56 355th Training Squadron implementing a new A-10 Thunderbolt II virtual reality simulator lab time 80 355th Training Squadron implementing a new A-10 Thunderbolt II virtual reality simulator lab time 85 finger tracking strap led instructions on wall: 355th Training Squadron implementing a new A-10 Thunderbolt II virtual reality simulator lab time 113 Is this documented support for all users? I'd like to use this too for many of your modules. I only fly in VR and would love hand tracking as show in this video that would also control over buttons and knobs in the cockpits. Thank you very much!

Is there a reason the targeting pod refuses to track moving targets?!? Perfect contrast, slow moving target still nothing. I've got it to track once for about 100', until I crashed into the target seeing I was a quarter mile away from it before it even started tracking.

Hi guys, i don't know if i am the only one still having issues with locking a moving target. In v2.6 the moving target got auto locked, and all i had to do was designate it and get the cross in between the vertical lines. But this is not the case anymore and the target indicator just remains in the point i locked it, and the target just drives on. Is this because the Flir pod has been replaced by the 228, or is this a bug? Why has this been changed in 2.7 when now i got used to locking the moving targets this way ? Most of the video's on how to use it are from versions before 2.7....... where it worked ! This is not a complaint, but exchanging and collecting more information and/or updated video somewhere i can learn from. I just need some help to know if the 28 Flir has become obsolete or outdated. Wags already made some great video's on the new 228 Pod, but only on stationary targets input please .... Kind regards, RWC.

Hi everyone, While playing in Multiplayer I witnessed an S60 firing at me and kept firing even after I completely masked my helicopter. I've created a test mission and confirmed that the S60 will fire regardless of terrain. It will even keep tracking you if you move behind the terrain. I've added a track and miz to demonstrate the issue. Thanks for your help. S60_Ignores_LOS.miz S60_Ignores_LOS.trk