Roman_455vAEW Posted April 17, 2018 Posted April 17, 2018 Have you tried running it as administrator? Sent from my XT1710-02 using Tapatalk WWW.455AEW.COM 455vAEW Discord
Zadren Posted April 17, 2018 Posted April 17, 2018 Have you tried running it as administrator? Sent from my XT1710-02 using Tapatalk Yes, that's how I would normally run it - before 2.5. It works right up until you assign a directory (thus populating the config file). As soon as you tell it where DCS is installed, it crashes, and stays crashed. :(
Markeebo Posted April 17, 2018 Posted April 17, 2018 I've got an issue that I can't seem to solve. I created a new profile for the F5E. I didn't like it so I deleted the profile. However, the format remains in the F5. How do I restore it to default size and position? Thanks Markeebo Sent from my SM-G955U using Tapatalk
Spt Posted April 18, 2018 Posted April 18, 2018 Same crash for me on 2.5 stable, and working fine with 2.5 open beta [sIGPIC][/sIGPIC]
AlaskanGrizzly Posted April 25, 2018 Author Posted April 25, 2018 I've got an issue that I can't seem to solve. I created a new profile for the F5E. I didn't like it so I deleted the profile. However, the format remains in the F5. How do I restore it to default size and position? Thanks Markeebo Sent from my SM-G955U using Tapatalk If you make a new profile for the profile it will have with the default settings. Don't make any modifications to the new profile and set it as the active profile using the taskbar icon. That will set the kneeboard back to its default location, size and colors.
AlaskanGrizzly Posted April 25, 2018 Author Posted April 25, 2018 Yes, that's how I would normally run it - before 2.5. It works right up until you assign a directory (thus populating the config file). As soon as you tell it where DCS is installed, it crashes, and stays crashed. :( Same crash for me on 2.5 stable, and working fine with 2.5 open beta Can you send me your windows error logs right after you try running Kneeboard Builder? For windows 10: Right click on the start menu -> computer management -> expand 'event viewer' -> expand 'windows logs' -> click on application To save your all events: right click on application -> save all events as -> enter a name and save as an Event File (.evtx) To save a single event: right click on the event(s) you want to save -> save selected event -> enter a name and save as an Event File (.evtx) E-mail the logs to me at s13solutions@gmail.com.
AlaskanGrizzly Posted April 25, 2018 Author Posted April 25, 2018 Also looking to remove the maps from the kneeboard for a "im Missing" COOP mission, where the heli shoudnt know its own position at mission start It is possible to remove the maps themselves but I have not found a way to remove the blank kneeboard pages that remain. If you don't mind having 4 or 5 blank pages in your kneeboard I can let you know how to do it.
AlaskanGrizzly Posted April 25, 2018 Author Posted April 25, 2018 (edited) Version 1.7.0.2 Released Version 1.7.0.2 is now available. -Fixed crash due to leftover 'CaucusBase' folder in DCS 2.5 installations. -Fixed error and crash when trying to set standalone Flaming Cliffs aircraft profiles. -Added basic error catching for unhandled errors. Hopefully this will fix a few of the common errors causing crashes for people. Feel free to throw any problems at me here at the forums or via email at s13solutions@gmail.com. Also, I have received a large number of bug and crash reports over the last several months so if I have forgotten about you and haven't fixed your problem please send me a reminder. Edited April 25, 2018 by AlaskanGrizzly
Spt Posted April 25, 2018 Posted April 25, 2018 ok I have this message now with 1.7.0.2 at first launch : --------------------------- The developer must be a moron because there was an error! --------------------------- Use Ctrl + C to copy this error and e-mail it to s13solutions@gmail.com : System.FormatException: Le format de la chaîne d'entrée est incorrect. à System.Number.ParseDouble(String value, NumberStyles options, NumberFormatInfo numfmt) à KneeboardBuilder.Viewmodels.MainViewModel.FindDefaultKneeboards() à KneeboardBuilder.Viewmodels.MainViewModel.Initilization() à KneeboardBuilder.Viewmodels.MainViewModel..ctor() à KneeboardBuilder.Views.MainView..ctor() --------------------------- OK --------------------------- [sIGPIC][/sIGPIC]
Spt Posted April 25, 2018 Posted April 25, 2018 After a reinstal I have the same problem from 1.7.0.1, not working with 2.5 stable with this message at first launch : And after an attempt to select stable folder, there is a crash then crash of soft at every launch ! [sIGPIC][/sIGPIC]
AlaskanGrizzly Posted April 25, 2018 Author Posted April 25, 2018 After a reinstal I have the same problem from 1.7.0.1, not working with 2.5 stable with this message at first launch : And after an attempt to select stable folder, there is a crash then crash of soft at every launch ! Could you send me your 'KneeboardBuilder.exe.Config' file from the Kneeboard Builder folder? Thanks!
Spt Posted April 25, 2018 Posted April 25, 2018 Sure ;) thanks againKneeboardBuilder.exe.rar [sIGPIC][/sIGPIC]
Markeebo Posted April 25, 2018 Posted April 25, 2018 If you make a new profile for the profile it will have with the default settings. Don't make any modifications to the new profile and set it as the active profile using the taskbar icon. That will set the kneeboard back to its default location, size and colors.Makes perfect sense. Thank you! I'll check it out when I get back next week. Markeebo Sent from my SM-G955U using Tapatalk
bunkerjunker Posted April 28, 2018 Posted April 28, 2018 I just did a clean install on a clean Windows 10. I set up a new profile however, when I try to select a profile in the taskbar, it hangs and I need to kill it via task manager. Have tried running as admin, then not as admin, then compatibility for windows 7 (where it worked perfectly). As long as I don't select a profile in the taskbar, the app works great for only the A-10. But everytime I've tried selecting a profile, it hangs.
Snoopy Posted April 30, 2018 Posted April 30, 2018 Why would "Kneedboard Settings" be grayed out? v303d Fighter Group Discord | Virtual 303d Fighter Group Website
vortexringstate Posted May 1, 2018 Posted May 1, 2018 sooooo... Am I correct in that this Kneeboard Builder app WILL NOT work with the latest 2.5 version(s) ? Im very interested but wont be trying if its problematic Occulus Rift i7-7700 3.6Ghz 16GB Ram 1080Ti 11GB SSDx2
guimcdo Posted May 3, 2018 Posted May 3, 2018 (edited) Same problem as Spat :music_whistling: Waiting your opinion for this problem :thumbup:. Enclosed the config file. See you GuillaumeKneeboardBuilder.exe.zip Edited May 4, 2018 by guimcdo
nerkub Posted May 10, 2018 Posted May 10, 2018 BTW, running the old version (KneeboardBuilder 1.6.9.9 Hotfix.zip) works fine
guimcdo Posted May 10, 2018 Posted May 10, 2018 Enjoy Spat, I found an old version 1.7.0.1 on my work laptop, I try it and the software works now: https://drive.google.com/open?id=1H0sgJyY4VmtVs274Qmz0ycQzWgcDpDfI Au fait, je suis Loulou sur la 3rd wings ;-) ++
nerkub Posted May 10, 2018 Posted May 10, 2018 Or here for the 1.6.xx version https://forums.eagle.ru/attachment.php?attachmentid=170480&d=1507567475 Was posted a few pages before
Spt Posted May 10, 2018 Posted May 10, 2018 Enjoy Spat, I found an old version 1.7.0.1 on my work laptop, I try it and the software works now: https://drive.google.com/open?id=1H0sgJyY4VmtVs274Qmz0ycQzWgcDpDfI Au fait, je suis Loulou sur la 3rd wings ;-) ++ salut ;) I already had this problem with 1.7.0.1 so not working for me :( And @Nerkub, you gave me only the hotfix so I have a CTD with this exe ! :( ++ [sIGPIC][/sIGPIC]
nerkub Posted May 11, 2018 Posted May 11, 2018 salut ;) I already had this problem with 1.7.0.1 so not working for me :( And @Nerkub, you gave me only the hotfix so I have a CTD with this exe ! :( ++ I just used the new 1.7.0.2 install version with just the old exe .. working for me.
AbortedMan Posted May 11, 2018 Posted May 11, 2018 Getting a "value cannot be null: path" error when I try to open a profile. The DCS install path seems to not want to save the folder I enter...it's blank every time I got back to the preferences screen. Kneeboard settings option is greyed out. I'm running the program as admin. OpenBeta branch standalone DCS.
Recommended Posts