ChrisIhao Posted March 17, 2020 Share Posted March 17, 2020 Hi Andre, What is the diameter and polarity of the power plug in the jetseat? I want to get an extension. Isn't it just easier to extend the power chord? :) Also, my seat is on the way! Long before the theoretical deadline of late May. Yay! Can't wait. My system: Win 10, Amd Ryzen 3700@stock GTX1080 Ti, 34" Asus G-sync ultrawide monitor, Ipad Air, 32 gigs of 3600 ram, complete CH HOTAS setup, Oculus Rift CV1/Trackir5 and a Saitek Quadrant Been simming since the Commodore 64. A few million polygons ago. Link to comment Share on other sites More sharing options...
JoeyJoJoJunior Posted March 17, 2020 Share Posted March 17, 2020 Isn't it just easier to extend the power chord? :) I have everything routed under my desk so a bulky extension in the middle of the run would be a pain to deal with. i7 6700k @ 4.6, Gigabyte Z170X-UD3, 32GB DDR4 2666, GTX 1070, Rift S | MS Sidewinder FFB2 w/ TM F-22 Pro Grip, TM TWCS Throttle, VKB T-Rudder Mk. IV Link to comment Share on other sites More sharing options...
unlikely_spider Posted March 17, 2020 Share Posted March 17, 2020 Does anyone know what that bracket system is in the first post of this thread, attached to the bottom of the chair? Modules: Wright Flyer, Spruce Goose, Voyager 1 Link to comment Share on other sites More sharing options...
NatoAviator Posted March 25, 2020 Share Posted March 25, 2020 Hey Guys - So, my jet seat arrived connected & installed Jet Seat control Panel & SimShaker for Aviators by f4l0 on Win 10, however I am not able to get any of the effects with DCS F-18...am I missing a step here? In the Effects setting it detects the F-18, however nothing...also in "Service" Tab, I do not get the massge function nor nothing when I Test Vibe Motors... The unit is ON & green Solid LED light...any ideas??? Link to comment Share on other sites More sharing options...
JoeyJoJoJunior Posted March 25, 2020 Share Posted March 25, 2020 Hey Guys - So, my jet seat arrived connected & installed Jet Seat control Panel & SimShaker for Aviators by f4l0 on Win 10, however I am not able to get any of the effects with DCS F-18...am I missing a step here? In the Effects setting it detects the F-18, however nothing...also in "Service" Tab, I do not get the massge function nor nothing when I Test Vibe Motors... The unit is ON & green Solid LED light...any ideas??? Did you open the Jetseat Control Panel? Make sure you are in USB and not Sound mode. You can also test the motors there just to make sure you're getting some kind of response. i7 6700k @ 4.6, Gigabyte Z170X-UD3, 32GB DDR4 2666, GTX 1070, Rift S | MS Sidewinder FFB2 w/ TM F-22 Pro Grip, TM TWCS Throttle, VKB T-Rudder Mk. IV Link to comment Share on other sites More sharing options...
f4l0 Posted March 25, 2020 Share Posted March 25, 2020 Hey Guys - So, my jet seat arrived connected & installed Jet Seat control Panel & SimShaker for Aviators by f4l0 on Win 10, however I am not able to get any of the effects with DCS F-18...am I missing a step here? In the Effects setting it detects the F-18, however nothing...also in "Service" Tab, I do not get the massge function nor nothing when I Test Vibe Motors... The unit is ON & green Solid LED light...any ideas??? Did you test it with a single player mission? f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ Link to comment Share on other sites More sharing options...
NatoAviator Posted March 25, 2020 Share Posted March 25, 2020 Good Morning @f4l0, @JoeyJoJoJunior...my steps as follows: Connected Jet Seat Power & Connected to USB Port on my Rig...(Power is ON & Listed Enabled in Device Manager) Installed Jet Seat control - Tested all motors & they work individually & so does the Massage Function.. Installed SimShaker for Aviators by f4l0 on Win 10 (Green LED Power ON, Green LED USB MODE Light ON, Motors are ON) I`ve also switched to Multiple USB ports - Unit is connected as it vibrates when inserted into new USB Port I have Tested in Multiple Single & Multi-player (Online Squad) Missions & it is not working... SimShaker for Aviators is running in the System Tray, it detects that I am play DCS F-18 Module...but Nothing... I am not able to use the Massage Function nor Test the Motors in the SimShaker for Aviators Application... It seems to me...that there is NO Interface between SimShaker for Aviators & the JetSeat itself...Any Ideas please? Link to comment Share on other sites More sharing options...
JoeyJoJoJunior Posted March 25, 2020 Share Posted March 25, 2020 What does this screen say for you (should say Connected): Also, you should have something like this in the log page when you start up the application: 12:37:21.011 SimShaker for Aviators beta Version 1.3.10.6 12:37:21.023 ********** DCS World Public Release version folder found in Saved Games ********** 12:37:21.036 DCS export feature setup: SimShaker.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts 12:37:21.048 DCS export feature setup: ExportCore.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.057 DCS export feature setup: ExportDevice.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.065 DCS export feature setup: KeyValueStore.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.076 DCS export feature setup: Network.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.088 DCS export feature setup: Protocol.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.097 local Tacviewlfs=require('lfs');dofile(Tacviewlfs.writedir()..'Scripts/TacviewGameExport.lua') call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua 12:37:21.102 local SimShakerlfs=require('lfs'); dofile(SimShakerlfs.writedir()..'Scripts/SimShaker.lua') call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua 12:37:21.107 dofile(lfs.writedir()..[[scripts\SimShaker-export-core\ExportCore.lua]]) call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua 12:37:21.112 ********** Custom DCS World configuration found ********** 12:37:21.118 DCS export feature setup: SimShaker.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts 12:37:21.124 DCS export feature setup: ExportCore.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.129 DCS export feature setup: ExportDevice.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.135 DCS export feature setup: KeyValueStore.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.140 DCS export feature setup: Network.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.146 DCS export feature setup: Protocol.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.151 local Tacviewlfs=require('lfs');dofile(Tacviewlfs.writedir()..'Scripts/TacviewGameExport.lua') call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua 12:37:21.155 local SimShakerlfs=require('lfs'); dofile(SimShakerlfs.writedir()..'Scripts/SimShaker.lua') call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua 12:37:21.160 dofile(lfs.writedir()..[[scripts\SimShaker-export-core\ExportCore.lua]]) call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua i7 6700k @ 4.6, Gigabyte Z170X-UD3, 32GB DDR4 2666, GTX 1070, Rift S | MS Sidewinder FFB2 w/ TM F-22 Pro Grip, TM TWCS Throttle, VKB T-Rudder Mk. IV Link to comment Share on other sites More sharing options...
=Andre= Posted March 25, 2020 Share Posted March 25, 2020 Hi Andre, What is the diameter and polarity of the power plug in the jetseat? I want to get an extension. 5.5 mm outer diameter, 2.1-2.4 mm inner diameter, 10-12 mm long, positive inside Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
=Andre= Posted March 25, 2020 Share Posted March 25, 2020 It seems to me...that there is NO Interface between SimShaker for Aviators & the JetSeat itself...Any Ideas please? Do you have Seat Handler utility running? Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
NatoAviator Posted March 25, 2020 Share Posted March 25, 2020 Did you test it with a single player mission? What does this screen say for you (should say Connected): Also, you should have something like this in the log page when you start up the application: 12:37:21.011 SimShaker for Aviators beta Version 1.3.10.6 12:37:21.023 ********** DCS World Public Release version folder found in Saved Games ********** 12:37:21.036 DCS export feature setup: SimShaker.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts 12:37:21.048 DCS export feature setup: ExportCore.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.057 DCS export feature setup: ExportDevice.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.065 DCS export feature setup: KeyValueStore.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.076 DCS export feature setup: Network.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.088 DCS export feature setup: Protocol.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.097 local Tacviewlfs=require('lfs');dofile(Tacviewlfs.writedir()..'Scripts/TacviewGameExport.lua') call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua 12:37:21.102 local SimShakerlfs=require('lfs'); dofile(SimShakerlfs.writedir()..'Scripts/SimShaker.lua') call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua 12:37:21.107 dofile(lfs.writedir()..[[scripts\SimShaker-export-core\ExportCore.lua]]) call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua 12:37:21.112 ********** Custom DCS World configuration found ********** 12:37:21.118 DCS export feature setup: SimShaker.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts 12:37:21.124 DCS export feature setup: ExportCore.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.129 DCS export feature setup: ExportDevice.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.135 DCS export feature setup: KeyValueStore.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.140 DCS export feature setup: Network.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.146 DCS export feature setup: Protocol.lua added to C:\Users\YourUserID\Saved Games\DCS\Scripts\SimShaker-export-core 12:37:21.151 local Tacviewlfs=require('lfs');dofile(Tacviewlfs.writedir()..'Scripts/TacviewGameExport.lua') call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua 12:37:21.155 local SimShakerlfs=require('lfs'); dofile(SimShakerlfs.writedir()..'Scripts/SimShaker.lua') call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua 12:37:21.160 dofile(lfs.writedir()..[[scripts\SimShaker-export-core\ExportCore.lua]]) call found in C:\Users\YourUserID\Saved Games\DCS\Scripts\Export.lua @JoeyJoJoJunior - Hey, a fellow Canuck, I am from Toronto :) It say, Connected - OK... The Seat is connected... Yes, I have the log page also...I am currently @ work, but I can send it tonight....I just don't understand the issue here...Should I uninstall & re-install the Simshaker Application? Link to comment Share on other sites More sharing options...
NatoAviator Posted March 25, 2020 Share Posted March 25, 2020 (edited) Do you have Seat Handler utility running? @=Andre= It say, Connected - OK... Both the Seat Handler Utility & the SimShaker App are running in the System Tray... Any Ideas? Edited March 25, 2020 by NatoAviator Add'l remarks... Link to comment Share on other sites More sharing options...
f4l0 Posted March 26, 2020 Share Posted March 26, 2020 @=Andre= It say, Connected - OK... Both the Seat Handler Utility & the SimShaker App are running in the System Tray... Any Ideas? Did you test any other plane? Are you using any other 3rd party software? f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ Link to comment Share on other sites More sharing options...
=Andre= Posted March 26, 2020 Share Posted March 26, 2020 @=Andre= It say, Connected - OK... Both the Seat Handler Utility & the SimShaker App are running in the System Tray... Any Ideas? What if you try to TEMPORARILY disable your firewall software? Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
NatoAviator Posted March 26, 2020 Share Posted March 26, 2020 @=Andre=,@f4l0....Ok, I finally got it to work, I uninstalled the SimShaker App, cleared it's Folders from my Saved Games, Reinstalled & it is working fine....Amazing piece of kit! I am running all of the following Software for DCS Open Beta with no issues: Simshaker App, VRK Kneeboard, SRS, Voice Attack, Discord, Occulus & OTT, Norton Security & DCS. Link to comment Share on other sites More sharing options...
=Andre= Posted March 26, 2020 Share Posted March 26, 2020 Thank you for the update! Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
NatoAviator Posted March 26, 2020 Share Posted March 26, 2020 Thank you for the update! No worries, thanks for this kit, I don't know how I was flying w/out this all these years! :pilotfly::joystick: Link to comment Share on other sites More sharing options...
f4l0 Posted March 26, 2020 Share Posted March 26, 2020 No worries, thanks for this kit, I don't know how I was flying w/out this all these years! :pilotfly::joystick: Thanks for your kind words! :) f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ Link to comment Share on other sites More sharing options...
ChrisIhao Posted March 27, 2020 Share Posted March 27, 2020 I also would like to thank you guys for this amazing experience. I got the wheels software as well, as I like playing Dirt Rally and Assetto Corsa once in a while. Haven't been able to test Dirt Rally, but Corsa feels great after some tweaking (I prefer not using the engine rev feedback, as it seems to cancel out the other effects). Oh, and flying my f-18 feels so different with this kit. First time I fired the cannon. Wooow. Thanks for the super quick delivery. With the deadline in May, I didn't really expect to get it more than two months ahead of this. Thumbs up! Oh, lastly. Is it very difficult to change the side which the cables exit the pad? It would make my world so much easier, due to my room layout. I guess flipping the pad won't be a good alternative. :) My system: Win 10, Amd Ryzen 3700@stock GTX1080 Ti, 34" Asus G-sync ultrawide monitor, Ipad Air, 32 gigs of 3600 ram, complete CH HOTAS setup, Oculus Rift CV1/Trackir5 and a Saitek Quadrant Been simming since the Commodore 64. A few million polygons ago. Link to comment Share on other sites More sharing options...
=Andre= Posted March 30, 2020 Share Posted March 30, 2020 Oh, lastly. Is it very difficult to change the side which the cables exit the pad? It would make my world so much easier, due to my room layout. No, that's not hard to do. The cover has slots on the both sides for that purpose. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
ChrisIhao Posted March 30, 2020 Share Posted March 30, 2020 No, that's not hard to do. The cover has slots on the both sides for that purpose. Ok. Excellent! Didn't want to mess around with it before knowing. One more thing I wondered about while playing Dirt Rally 2.0 last night, is if the Jetpad is considered to be closer to the Gametrix Jetseat, not the Jetseat Race edition, in the options of the Wheels software? Guess there's not a big difference anyways, but it would be nice to know My system: Win 10, Amd Ryzen 3700@stock GTX1080 Ti, 34" Asus G-sync ultrawide monitor, Ipad Air, 32 gigs of 3600 ram, complete CH HOTAS setup, Oculus Rift CV1/Trackir5 and a Saitek Quadrant Been simming since the Commodore 64. A few million polygons ago. Link to comment Share on other sites More sharing options...
sollymans Posted March 30, 2020 Share Posted March 30, 2020 HI Andre, My Jetseat has lost all power, have tried to connect with different power adapter, checked the USB Connection, re checked the power and controller connections etc. No green light next to power switch. Is there a fuse anywhere near the power supply that I can check. Thanks Link to comment Share on other sites More sharing options...
ChrisIhao Posted March 30, 2020 Share Posted March 30, 2020 No, that's not hard to do. The cover has slots on the both sides for that purpose. Wow. You even left a strips in there for attaching the cables beside the second outtake. The slot was actually quite hidden from the outside. Love it. Much more practical for me. My system: Win 10, Amd Ryzen 3700@stock GTX1080 Ti, 34" Asus G-sync ultrawide monitor, Ipad Air, 32 gigs of 3600 ram, complete CH HOTAS setup, Oculus Rift CV1/Trackir5 and a Saitek Quadrant Been simming since the Commodore 64. A few million polygons ago. Link to comment Share on other sites More sharing options...
easy_ci Posted March 31, 2020 Share Posted March 31, 2020 I just wanted to place my order but its "out-of-stock" (both variants). Two days ago there was a hint, that it will take up to 10 weeks for delivery but it was "in-stock". Did you stop the pre-order because of too many orders or anything else? :( HW-Specs: Ryzen 5800x | Gigaybte RTX 3080 | 32Gb DDR4-4000 | 2x M.2 970Evo + SSDs| LG 34" 21:9 Peripherie: Thrustmaster Warthog Hotas (Slew-Mod + Nyogel) + MFG Crosswind Pedals | SimShaker Jetpad | HP Reverb G2 Link to comment Share on other sites More sharing options...
=Andre= Posted April 6, 2020 Share Posted April 6, 2020 HI Andre, My Jetseat has lost all power, have tried to connect with different power adapter, checked the USB Connection, re checked the power and controller connections etc. No green light next to power switch. Is there a fuse anywhere near the power supply that I can check. Thanks Hi sollymans, please try to follow Troubleshooting steps as described in JetSeat User Guide https://dreamsimteam.blogspot.com/p/user-guides.html Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Recommended Posts