[Official] SimShaker for Aviators

[=Andre=]

3 hours ago, tomeye said:

<?xml version="1.0" encoding="utf-8"?>
<!---->
<App_Settings>
  <Enable_Log Value="False" />
  <License Key="removed" />
  <Nic Address="" />
  <NicNum Value="0" />
  <Activation_Method Value="1" />
  <Prenumerata_ Value="" />
  <Info_123 Value="" />
  <Enable_ASIO_Audio Value="False" />
  <Selected_Audio_Device Value="{0.0.0.00000000}.{aa462063-416c-4ac1-a536-0a4baf63eb38}" />
  <Selected_Max_Audio_Channels Number="2" />
  <Enable_Compressor Value="False" />
  <Enable_Booster Value="True" />
  <Compressor_Factor Value="0,8" />
  <Boost Value="1,1" />
  <Num Value="0" />
  <Start_Minimized Value="True" />
  <Hide_When_Minimized Value="False" />
  <Check_For_Updates Value="True" />
  <Enable_Couples Value="True" />
  <Surround_ Value="True" />
  <Channels_Mask Value="3" />
</App_Settings>

 

Thank you.

Please try to make this param blank <Selected_Audio_Device Value="" /> and if Sound Module starts select a proper device in the settings.

[tomeye]

I deleted the entry and selected again my usb sound card. After restarting the app I have the same entry and error

[tomeye]

Additionally the log in C:\Users\<user>\AppData\Local\SimShaker for Aviators\log.log contains the errors:
 

|ERROR|SimShaker.UI.ProcessManager|System.InvalidOperationException: No process is associated with this object.
   at System.Diagnostics.Process.EnsureState(State state)

|ERROR|SimShaker.Core.DataProvider.DCSDataProvider|System.NullReferenceException: Object reference not set to an instance of an object.
   at SimShaker.Core.DataProvider.DCSDataProvider.disconnect()

 

I cleared all settings for both apps and now sound module (latest beta) starts with ssa (latest beta). I only get the error displayed.
I can test with previous version of SSA in case something changed with latest update.

[=Andre=]

48 minutes ago, tomeye said:

 

I cleared all settings for both apps and now sound module (latest beta) starts with ssa (latest beta).

So, Sound Module version 2.40 beta now works fine, right?

[tomeye]

1 hour ago, =Andre= said:

So, Sound Module version 2.40 beta now works fine, right?

Yes it loads and works ok. The only issue is the error in SSA.

[Tricky11]

Evening all. I seemed to be getting this error when loading into a aircraft in dcs?

 

[=Andre=]

3 minutes ago, Tricky11 said:

Evening all. I seemed to be getting this error when loading into a aircraft in dcs?

 

Please read here https://forum.dcs.world/topic/147495-official-simshaker-for-aviators/?do=findComment&comment=5375077

[Tricky11]

51 minutes ago, =Andre= said:

Please read here https://forum.dcs.world/topic/147495-official-simshaker-for-aviators/?do=findComment&comment=5375077

Ahhh thats it. Cheers Andre

[EvilBert VR]

Good morning everyone.

I have installed Volanta and SSA. I have found out that SSA won't work without Volanta running.
Anyone knows of a potential conflict?

TIA

[motoadve]

Simshaker works when testing but does not work in game anymore, nothing was changed on my end, any ideas?

 

nullnull

[Lombra]

Hi,

I'm getting this error when the application attempt to launch:

System.Net.Sockets.SocketException (0x80004005): An attempt was made to access a socket in a way forbidden by its access permissions

I've seen it mentioned a few times here, but there seems to be no apparent solution. Which ports does SSA use, that I can try to identify other applications using the same ones? I can see that it manages to open UDP ports 29375 and 56721 before crashing.

[j9murphy]

@=Andre=  I've built a motion seat which has movable flaps in the seat and seat back to replicate g-forces.  Right now I have my JetPad just resting in the seat, however I would like to create custom padding for the seat.  My question is this....  Would it be pretty straight forward for me to remove the transducers and electronics from the JetPad and install them into the custom padding for the movable seat?  It looks like everything could be removed and re-installed without too much of a bother, however I wanted to see if there were any "special instructions" you might have for doing so.  

 

[=Andre=]

2 hours ago, j9murphy said:

@=Andre=  I've built a motion seat which has movable flaps in the seat and seat back to replicate g-forces.  Right now I have my JetPad just resting in the seat, however I would like to create custom padding for the seat.  My question is this....  Would it be pretty straight forward for me to remove the transducers and electronics from the JetPad and install them into the custom padding for the movable seat?  It looks like everything could be removed and re-installed without too much of a bother, however I wanted to see if there were any "special instructions" you might have for doing so.  

 

Well, I think it's straight forward in case of SimShaker JetPad. If you'd like to carefully unglue the motors plastic shells from the foam layer, you can try to use some white-spirit based dissolvent to soften the glue.

[jgreg]

On 3/18/2024 at 5:36 AM, f4l0 said:

 

Yeah, the touchdown effect is a bit "tricky" for the Gazelle since she has no compressing struts... Can you provide me a single short trackfile that I can use to test on my side? I've currently no flight gear on my side and flying the Gazelle with keyboard is really tricky

Which seat do you use?

 

Please see attached file with the Gaz bouncing on the skids.gaz skid test.trk

[BaronVonVaderham]

So I’ve been playing around with the hf8 and simshaker, and besides not understanding how the turbulence options work, I noticed that there is a permanent rumble present. Possibly because the software is glitching, because any rumble present when I end a flight, doesn’t stop until I start the next flight or shut down and restart simshaker.

so far the experience left me desillusioned about it. I definitely won’t miss it when it’s gone. Thumping and knocking would be fun, but everything just a rumble of some sort, just doesn’t feel interesting to me.

it might be how I set it up, so if others could share their settings, then I can evaluate if I’m doing something wrong.

[Bazz_Mulder]

Just disable the engine rumble effect

[Keith Briscoe]

Hello @=Andre= and other SimShaker lovers!

I have a new PC arriving tomorrow.  Anything specific I should do to get back up and running with Simshaker (dcs) on new pc with regard to files, saved files, license, etc.?  Thanks in advance.

 

[=Andre=]

9 hours ago, Keith Briscoe said:

Hello @=Andre= and other SimShaker lovers!

I have a new PC arriving tomorrow.  Anything specific I should do to get back up and running with Simshaker (dcs) on new pc with regard to files, saved files, license, etc.?  Thanks in advance.

 

Hell Keith,
Yes, I think you will have something to do with this stuff. But it very much depends on your PC and apps configuration.
If your Documents folder is on MS OneDrive, which is Windows default option now,  you will likely get the settings on the new PC automatically. If not, you will want to move them manually. The configs are stored in the Documents/SimShaker for Aviators folder.
In any  case we are here if you need help.

[Bazz_Mulder]

I've just upgraded from stable 2.7.0 to beta 2.7.5 and now I have this in log window:

what is causing it? log file is getting bigger and bigger

Edited April 18, 2024 by Bazz_Mulder

[skypickle]

why does simshaker not work in some multiplayer servers? I was on the 'longshot' server yesterday and simshaker was silent although it worked in other servers as well as SP missions.

[FZG_Immel]

On 4/18/2024 at 3:20 PM, Bazz_Mulder said:

I've just upgraded from stable 2.7.0 to beta 2.7.5 and now I have this in log window:

what is causing it? log file is getting bigger and bigger

 

same

[FZG_Immel]

anyone selling a Gametrix controller ? mine seem to be faulty, and 2 right leg motors arent working anymore. It also makes bad short circuit odor.

 

Anyone know if the controller itself can be bought outside of Andre (who unfortunately cannot sell them anymore to my country)

[stag1978]

Hi, 

I have a very similar issue that two guys already mentioned in the last few days: the sound module does not start at all (latest beta) and if I stat the Simshaker app (2.7.5) I get the same error as above>

14:26:58.4346 System.NullReferenceException: Object reference not set to an instance of an object.

No sound module in the taskbar.

Do anyone has a workaroud?

[=Andre=]

1 hour ago, stag1978 said:

Hi, 

I have a very similar issue that two guys already mentioned in the last few days: the sound module does not start at all (latest beta) and if I stat the Simshaker app (2.7.5) I get the same error as above>

14:26:58.4346 System.NullReferenceException: Object reference not set to an instance of an object.

No sound module in the taskbar.

Do anyone has a workaroud?

Hi,
please uninstall 2.40 and install 2.41 https://simshaker.com/downloads/beta_SimShaker_Sound_Module_Setup_v_2.41.msi

[stag1978]

Hi Andre,

Thank you for the quick response. I have dowloaded the installer from the link you have sent (the webpage still has the 2.40 as beta).

Installed and however I have this meesge in the log, it works.

20:39:49.1391 Settings saved to path: C:\Users\stag1\Documents\SimShaker for Aviators\SettingsDatabase_beta.bin
20:39:49.2017 Sent: close
20:39:49.5048 System.InvalidOperationException: No process is associated with this object.
 

Thanks for the swift response, really appreciated.