LynxDK Posted December 2, 2016 Posted December 2, 2016 Hey Everyone. Kornskydiver And i have been working together on getting some plans and sim products for the Bell Huey on the market. As with all my projects, the plans will be free for everyone to download, and the Instrument Bezels, Panels and accessories will later on be available in my Webshop. I will be posting pictures and news in this thread, and like allways, you are all most welcome to help out with inputs and ideas. I can tell you that The MIP, the Instrument Bezels and panels are all measured and designed from the real thing. We will start by posting the Drawings for the Main Instrument Panel. http://lynx.dk/blueprints/Huey%20MIP%20Real%20Instruments%20v.1.0.dxf This is the DXF. File for the Main Instrument Panel, and its measured from a real Piece. As there are many details and versions of the Huey MIP, this is labelled V.1.0 There might be other, and updated versions if i change something. The Main Instrument Panel Drawing is made ready for the Lamp posts i sell in my Webshop for the A-10C, as they are the same in the Huey. The MIP will be available in 1:1 Printable PDF also, like the A-10C. Here is the link to the Huey Download Section of my site: http://lynx.dk/downloads/huey-plans-blueprints/ This is it for now, hope you guys like this :) ... will get back with more later. Regards. LynxDK [sIGPIC][/sIGPIC] Instagram
Kornskydiver Posted December 2, 2016 Posted December 2, 2016 Outstanding job Lynx! 1 [sIGPIC][/sIGPIC]
Dropship Pilot Posted December 4, 2016 Posted December 4, 2016 Great stuff! :thumbup: Will there be a drawing/dimensions for the seat too? Cheers, DSP
LynxDK Posted December 4, 2016 Author Posted December 4, 2016 Great stuff! :thumbup: Will there be a drawing/dimensions for the seat too? Cheers, DSP Korn has a real seat, so yea, in time we will release those too :) Regards. LynxDK [sIGPIC][/sIGPIC] Instagram
Hansolo Posted December 6, 2016 Posted December 6, 2016 Very nice job gentlemen :thumbup: Cheers Hans 132nd Virtual Wing homepage & 132nd Virtual Wing YouTube channel My DCS-BIOS sketches & Cockpit Album
LynxDK Posted February 1, 2017 Author Posted February 1, 2017 A couple of pictures of some of the things that im working on for the Huey. Instrument Eyebrow Light Posts These are 3D printed to keep the price down.... I can mill them out, but it will add to the cost. And yes, you can install LED's in them so they work :) These will be available in the shop soon. And Light Caps for the Upcomming Huey Panels. I know its not much... but in time more will arrive :) Regards. LynxDK [sIGPIC][/sIGPIC] Instagram
BlacleyCole Posted May 17, 2018 Posted May 17, 2018 Have you completed the sample cockpit so we can see everything put together BlackeyCole 20years usaf XP-11. Dcs 2.5OB Acer predator laptop/ i7 7720, 2.4ghz, 32 gb ddr4 ram, 500gb ssd,1tb hdd,nvidia 1080 8gb vram New FlightSim Blog at https://blackeysblog.wordpress.com. Go visit it and leave me feedback and or comments so I can make it better. A new post every Friday.
LynxDK Posted May 17, 2018 Author Posted May 17, 2018 Thank you. I would like to tell you that i have, but the truth is that i have so many orders, that i havent had time to develop a whole lot for the Huey and the A-10. That also means that people have to expect some waiting time on their orders. However, i can tell you that we are working on getting the Control Unit for the entire Overhead Panel ready, which will make all the Overhead Panels work with DCS BIOS, and that includes the Circuit Breakers. Regards. LynxDK [sIGPIC][/sIGPIC] Instagram
kiowadriver Posted May 28, 2018 Posted May 28, 2018 Uh-1 panels Curious if you guys are still operational. The website doesn't show any activity in 2018.
LynxDK Posted May 29, 2018 Author Posted May 29, 2018 Curious if you guys are still operational. The website doesn't show any activity in 2018. Hey. yea, we are very much operational. And im sorry about the website, we are too busy fulfilling orders and developing. We have alot going on and that will soon show :) Specific to the Huey we are working on all the panels for the Overhead Panel, including the Circuit Breakers. And a control unit to run them all with DCS-BIOS. We are struggling with time due to many orders, so that have slowed developing down abit, but we are not stopping :) We have alot in store for the future :) Regards. LynxDK [sIGPIC][/sIGPIC] Instagram
Deadman Posted May 29, 2018 Posted May 29, 2018 (edited) Hun with all of the order it is disappointing not to see any reviews or posts by satisfied customers. But congratulations on your success. Edited May 29, 2018 by Deadman https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
LynxDK Posted May 29, 2018 Author Posted May 29, 2018 congratulations on your success. Thank you :) Regards. LynxDK [sIGPIC][/sIGPIC] Instagram
slowmover Posted September 11, 2018 Posted September 11, 2018 How did you make thatVery nice project [sIGPIC][/sIGPIC]
LynxDK Posted September 12, 2018 Author Posted September 12, 2018 Cad Software, a CNC Machine and alot of Research and time. :) Regards. LynxDK [sIGPIC][/sIGPIC] Instagram
GroseyBoy Posted January 22, 2020 Posted January 22, 2020 Font style Hi LynxDK. You're doing some awesome work :) Can you tell me which font you've used for the text on these panels please. I'm in the process of building an Armament Panel for my sim. Cheers, Groseyboy
hansangb Posted January 22, 2020 Posted January 22, 2020 Hi LynxDK. You're doing some awesome work :) Can you tell me which font you've used for the text on these panels please. I'm in the process of building an Armament Panel for my sim. Cheers, Groseyboy I would think it's the MILSPEC 33558 font. hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1
Recommended Posts