Strikeeagle345 Posted December 17, 2018 Share Posted December 17, 2018 Hey guys! Will the tomcats throttle profile line up with the Warthog's hardware detent by default or will we need to mess with the axis tuning to get it dialed in? Thanks for all the hard work. Strike USLANTCOM.com i7-9700K OC 5GHz| MSI MPG Z390 GAMING PRO CARBON | 32GB DDR4 3200 | GTX 3090 | Samsung SSD | HP Reverb G2 | VIRPIL Alpha | VIRPIL Blackhawk | HOTAS Warthog Link to comment Share on other sites More sharing options...
DirtSailor Posted March 13, 2019 Share Posted March 13, 2019 no one ever answered? i7-8086k CPU @4.00GHz Mem: 32GB EVGA 1080ti SSD - 500 GB X 3 HDD - 1 TB Link to comment Share on other sites More sharing options...
mkiii Posted March 14, 2019 Share Posted March 14, 2019 Seems to be aligned ok on mine as far as I can tell. Max on the quadrant at the top detent, Full AB at top of range. idle detent position is exact. Cutoff buttons at bottom end. Not 100% sure about Max AB setting - the throttle looks to be at the right place on the quadrant in game, but the nozzles only open to 3.5 not 4. I don't know if that is correct - but they look pretty full open in external view. Link to comment Share on other sites More sharing options...
DirtSailor Posted March 14, 2019 Share Posted March 14, 2019 I noticed that as well. My first fam flight my settings were on the F/18 and most everything worked fine. I then started looking at the F14 Pilot configuration. Had to remap the rudders....also, will need to fine tune the pitch and roll and rudder curves. i7-8086k CPU @4.00GHz Mem: 32GB EVGA 1080ti SSD - 500 GB X 3 HDD - 1 TB Link to comment Share on other sites More sharing options...
mkiii Posted March 18, 2019 Share Posted March 18, 2019 ANyhoo - it's early days right now, so nothing is set in stone. Link to comment Share on other sites More sharing options...
Sergeant_Hamlet Posted March 18, 2019 Share Posted March 18, 2019 (edited) I set mine to slider with a 15% deadzone at the top, which put the afterburner gate right up against the throttle detent. The tomcat's airbreak automatically retracts at full mil power, so i played with the deadzone until hitting the detent retracted the airbrake. Hope that helps! :) (I am using the TM warthog) Edited March 18, 2019 by Sergeant_Hamlet Link to comment Share on other sites More sharing options...
51GRIZZLY Posted July 6, 2019 Share Posted July 6, 2019 I set mine to slider with a 15% deadzone at the top, which put the afterburner gate right up against the throttle detent. The tomcat's airbreak automatically retracts at full mil power, so i played with the deadzone until hitting the detent retracted the airbrake. Hope that helps! :) (I am using the TM warthog) You sir are a genius !! i have looked all over the forum for the correct detent settings on the Warthog … your solution was the best, most simple and effective solution of them all Kudos !! Link to comment Share on other sites More sharing options...
Nealius Posted July 6, 2019 Share Posted July 6, 2019 I had to set curves for it to work. The AB detent, at least. MIL power on my Warthog equated to about 96% RPM in-game. I set my curves as an inverted slider with the following: 0 - 4 - 10 - 19 - 32 - 44 - 56 - 67 - 79 - 90 - 100 Works perfect for me, except my left throttle still gives 1-2% less RPM than the right even though they both have the same curves. Link to comment Share on other sites More sharing options...
grant977 Posted July 6, 2019 Share Posted July 6, 2019 Get the push through detent mod too it give you more play in mil and easy to go to ab. I forgot the name off the top of my head and don’t have it handy right now but I’m sure somebody here knows where to find it. Link to comment Share on other sites More sharing options...
Hamilton Posted July 6, 2019 Share Posted July 6, 2019 Hi, Are you referring to detent from Shapeways? If so, are you using any curves? I was not, but after the last update it seems a little different... Tks _________________________________ Aorus Z390 Extreme MB | i9 9900k CPU @ 5.0 GHz | EVGA RTX 2080 Ti FTW3 Ultra | 32 GB G Skill Trident Z 3600 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | Corsair TX 850M PS | Samsung 970 Evo Plus M.2 NVMe SSD 1TB |TMWH Hotas with VPC WarBRD Base| Corsair Gamer 570x Crystal Case | HP Reverb Link to comment Share on other sites More sharing options...
grant977 Posted July 7, 2019 Share Posted July 7, 2019 I am. I am using a tiny bit of curve. Link to comment Share on other sites More sharing options...
Hamilton Posted July 7, 2019 Share Posted July 7, 2019 I am. I am using a tiny bit of curve. Thanks Grant. _________________________________ Aorus Z390 Extreme MB | i9 9900k CPU @ 5.0 GHz | EVGA RTX 2080 Ti FTW3 Ultra | 32 GB G Skill Trident Z 3600 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | Corsair TX 850M PS | Samsung 970 Evo Plus M.2 NVMe SSD 1TB |TMWH Hotas with VPC WarBRD Base| Corsair Gamer 570x Crystal Case | HP Reverb Link to comment Share on other sites More sharing options...
E-Rock Posted July 8, 2019 Share Posted July 8, 2019 The speed brake trick someone posted earlier to set full MIL power at the detent works quite well. I bumped up the throttle curves bit by bit and tried the detent position until the brake retracted. Link to comment Share on other sites More sharing options...
wolfast Posted July 8, 2019 Share Posted July 8, 2019 F-14B: 0-4-10-19-32-44-56-67-79-90-100 30+ years flight sims -Alienware Desktop With constantly changing specs -Track IR 5 -Thrusmasters Warthog HOTAS #55179 -Saitek Pro Combat Rudder Pedals Link to comment Share on other sites More sharing options...
Hamilton Posted July 8, 2019 Share Posted July 8, 2019 F-14B: 0-4-10-19-32-44-56-67-79-90-100 Do you use this setting with Shapeways´ detent? Tks! _________________________________ Aorus Z390 Extreme MB | i9 9900k CPU @ 5.0 GHz | EVGA RTX 2080 Ti FTW3 Ultra | 32 GB G Skill Trident Z 3600 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | Corsair TX 850M PS | Samsung 970 Evo Plus M.2 NVMe SSD 1TB |TMWH Hotas with VPC WarBRD Base| Corsair Gamer 570x Crystal Case | HP Reverb Link to comment Share on other sites More sharing options...
grant977 Posted July 9, 2019 Share Posted July 9, 2019 Hamilton I’ll check mine when I get home and send it to you. Link to comment Share on other sites More sharing options...
Strikeeagle345 Posted July 9, 2019 Author Share Posted July 9, 2019 (edited) Hamilton said: Do you use this setting with Shapeways´ detent? Tks! Yes I am. this is what you want to set for it to be correct with the Shapeway detent. At mil, DLC and speedbreak retract. Edited June 7, 2023 by Strikeeagle345 Strike USLANTCOM.com i7-9700K OC 5GHz| MSI MPG Z390 GAMING PRO CARBON | 32GB DDR4 3200 | GTX 3090 | Samsung SSD | HP Reverb G2 | VIRPIL Alpha | VIRPIL Blackhawk | HOTAS Warthog Link to comment Share on other sites More sharing options...
Hamilton Posted July 10, 2019 Share Posted July 10, 2019 Yes I am. this is what you want to set for it to be correct with the Shapeway detent. At mil, DLC and speedbreak retract. Thank you so much Strikeeagle345 ! :thumbup: . _________________________________ Aorus Z390 Extreme MB | i9 9900k CPU @ 5.0 GHz | EVGA RTX 2080 Ti FTW3 Ultra | 32 GB G Skill Trident Z 3600 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | Corsair TX 850M PS | Samsung 970 Evo Plus M.2 NVMe SSD 1TB |TMWH Hotas with VPC WarBRD Base| Corsair Gamer 570x Crystal Case | HP Reverb Link to comment Share on other sites More sharing options...
wolfast Posted July 19, 2019 Share Posted July 19, 2019 Do you use this setting with Shapeways´ detent? Tks! Oops, sorry for the delay. Yes I do. Works perfectly. 30+ years virtual pilot. F-14B Driver. (Looking for a RIO) 33 years Model Aviation. 776036 #776036 FAA #FA3YTWPLMK 30+ years flight sims -Alienware Desktop With constantly changing specs -Track IR 5 -Thrusmasters Warthog HOTAS #55179 -Saitek Pro Combat Rudder Pedals Link to comment Share on other sites More sharing options...
Leviathan667 Posted June 7, 2023 Share Posted June 7, 2023 On 7/9/2019 at 10:35 AM, Strikeeagle345 said: Yes I am. this is what you want to set for it to be correct with the Shapeway detent. At mil, DLC and speedbreak retract. can you pls post your settings again? The image has been removed. Wishlist: Tornado ADV/IDS, Blackburn Buccaneer, Super Mystère B2, Saab J 35 Draken, Link to comment Share on other sites More sharing options...
Strikeeagle345 Posted June 7, 2023 Author Share Posted June 7, 2023 (edited) 1 hour ago, Leviathan667 said: can you pls post your settings again? The image has been removed. Sure thing. I will update my old post too. Same for both throttles. It should still be the same, I haven't changed it nor have I noticed any issues with it. Shapeway detent settings: Edited June 7, 2023 by Strikeeagle345 1 Strike USLANTCOM.com i7-9700K OC 5GHz| MSI MPG Z390 GAMING PRO CARBON | 32GB DDR4 3200 | GTX 3090 | Samsung SSD | HP Reverb G2 | VIRPIL Alpha | VIRPIL Blackhawk | HOTAS Warthog Link to comment Share on other sites More sharing options...
Leviathan667 Posted June 8, 2023 Share Posted June 8, 2023 thank you @Strikeeagle345 I'll put the values below so they will remain even after your screenshot will be deleted: Slider = checked Invert = unchecked User curve = cheked Values = 0 7 15 23 32 41 51 62 74 86 100 3 Wishlist: Tornado ADV/IDS, Blackburn Buccaneer, Super Mystère B2, Saab J 35 Draken, Link to comment Share on other sites More sharing options...
Recommended Posts