VNAO T-45 Goshawk

[Minsky]

I'm also not sure why the master alert goes hysterical when I lower OR raise the hook.

[RSE]

To all who worked on the T-45 ... Thank you for your hard work!!!  Go ahead!

[twanmal]

On 10/13/2025 at 2:09 PM, Zev said:

Great job, running through all training missions right now

- Training mission 1 (full cold start carrier). 
Stuck @12.a trim -3 and +8. 
Did the whole trim range but mission doesn’t continue. (Tried spacebar, tried with keystrokes as well)

 

I had the same problem until I forced with the stick up and down. Now I'm stuck at 21 select TCN or WYPT. Both are illuminated and won't go off after clicking on one or the other. 

Edited Tuesday at 08:52 PM by twanmal

[Rudel_chw]

On 10/13/2025 at 9:09 AM, Zev said:

Great job, running through all training missions right now

- Training mission 1 (full cold start carrier). 
Stuck @12.a trim -3 and +8. 
Did the whole trim range but mission doesn’t continue. (Tried spacebar, tried with keystrokes as well)

 

 

29 minutes ago, twanmal said:

I had the same problem until I forced with the stick up and down. Now I'm stuck at 21 select TCN or WYPT. Both are illuminated and won't go off after clicking on one or the other. 

Thanks for the reports, I will check the mission as soon as I get back home, as I’m currently on a short trip. 
best regards,

 

Eduardo

 

PS, here is a video I recorded when this mission was finished, can you tell me please in what moment of the procedure you get this issue?

 

 

Edited Tuesday at 09:20 PM by Rudel_chw

[twanmal]

first of all thanks a lot Eduardo.

- what he means with the trim is at around 13'35

- what I mean is at around 16'35''

enjoy the trip !

 

[Rudel_chw]

3 hours ago, twanmal said:

first of all thanks a lot Eduardo.

- what he means with the trim is at around 13'35

- what I mean is at around 16'35''

 

ok, the mission looks at the trim gauge needles to check its amount, do the trim needles move on your pc?

 

3 hours ago, twanmal said:

enjoy the trip !

thanks, but its not a pleasure trip, but a medical one: i’m fixing cataract on both eyes,  not life threatening, but I wanted to restore my vision as it was starting to bother me  .. I’m returning home next saturday and hopefully can fix this issue soon. 
 

Cheers!

[LCO489]

On 10/13/2025 at 9:55 AM, VR Flight Guy in PJ Pants said:

Oh, I notice that COM1 - PPT cannot be mapped to any HOTAS device except, keyboard. I have found a workaround but it would be nice to have it mappable.

to  solve that you just have to add this line on Input\Joystick\default.lua

{          down = Keys.COM1,        up = Keys.COM1,        name = _('COM PTT - COM1'),         category = {_('Communications')}, value_down =  1.0,        value_up = 0.0},

null

14 hours ago, Minsky said:

Hey guys, congrats on the 1.2 release!

Is it a known issue that the comms menu doesn't appear at all when starting in the air?

It works fine with ground starts, both hot and cold.

You need to bind 'COM PTT - COM1' to use Comm1 radio and it will work on flight.

Edited yesterday at 02:44 AM by LCO489

[Minsky]

1 hour ago, LCO489 said:

You need to bind 'COM PTT - COM1' to use Comm1 radio and it will work on flight.

It worked, thanks!

A classic senior moment. Haven't set up a new module in ages and totally forgot that is how it works in most of them. 

Edited yesterday at 04:38 AM by Minsky

[Zev]

5 hours ago, Rudel_chw said:

 

ok, the mission looks at the trim gauge needles to check its amount, do the trim needles move on your pc?

 

thanks, but its not a pleasure trip, but a medical one: i’m fixing cataract on both eyes,  not life threatening, but I wanted to restore my vision as it was starting to bother me  .. I’m returning home next saturday and hopefully can fix this issue soon. 
 

Cheers!

Hopefully it is a successful trip then. 
 

As for the trim, the needle is responding to my inputs, it just seems to me that it can’t hit the outer value of the-3. 
(It can be solved by using the joystick as mentioned.)

I have the same problem and stuck @ 21 selecting (either Tacan or HSI). Selecting either one or both doesn’t continue the training mission. 
 

[Rudel_chw]

3 hours ago, Zev said:

I have the same problem and stuck @ 21 selecting (either Tacan or HSI). Selecting either one or both doesn’t continue the training mission. 

ok, will take a look at that bug too. 

[Draken35]

10 hours ago, Rudel_chw said:

thanks, but its not a pleasure trip, but a medical one: i’m fixing cataract on both eyes,  not life threatening, but I wanted to restore my vision as it was starting to bother me  .. I’m returning home next saturday and hopefully can fix this issue soon. 
 

Enjoy you new eyes! Best procedure I ever had done!

[Spook]

The changes are great, but when you fly offline, the plane isn't a problem. However, when you connect to a server or someone hosting a mission, the simulator immediately crashes. Why does this happen, Rudell? Can you help us please?
Regards, Spook from Colombia.

[Rudel_chw]

1 hour ago, Spook said:

The changes are great, but when you fly offline, the plane isn't a problem. However, when you connect to a server or someone hosting a mission, the simulator immediately crashes. Why does this happen, Rudell? Can you help us please?
Regards, Spook from Colombia.

I only edited the training, @nibbylot has more knowledge of the Mod inner workings.