beppe_goodoldrebel Posted October 10, 2019 Posted October 10, 2019 (edited) Red Flag Training Missions - F-16C DOWNLOAD: https://www.digitalcombatsimulator.com/en/files/3306532/ A series of advanced training missions based on Red Flag ranges and rules. Features: - custom ATC with working ATIS - custom Voice Overs - populated airbases - simulated Red Flag rules - custom Misson Data Card on built-in kneeboard Missions: Day 0 - Welcome to Nellis! Enjoy the dusk and land with AWACS Magic 1-1 Day 1 - NTTR Familiarization and daylight formation flying Follow Springfield 1-1 over NTTR airspace , train formation flying Day 1 - Night formation flying Escort tanker during night time until bingo fuel or scheduled guests are done refueling Day 2 - AAR and BFM training Try air refueling and then engage Springfield 1 over FEBA guns only! Day 2 - ACM Training Engage Aggressors F-16C over FEBA with Sidewinders Day 2 - ACM Training AGGRESSOR Your turn as an Aggressor! Engage Blue F-15E over FEBA with Sidewinders, no Tanker or AWACS support this time! Day 2 - BVR Training Engage Aggressors F-15C over FEBA with AIM120 Day 3 - Air-Ground Range Training Train your ground pounding skills against simulated Red tanks with M151 Rockets and Mk82s over Range 62. FAC Bravo 1 will call hits! Day 3 - Pop-up Attack Training Try the Pop-up Attack maneuver on a pre-planned target. Use terrain masking to approch the target and avoid the defending SA-6 and AAA. FAC Bravo 1 will call hit. Once pickle go defensive and avoid SAM launch. -Day 3 - JTAC Training Contact JTAC Axeman for support Bravo planned attack on a Red Logistic Outpost defended by tanks , AAA and an SA-2. Custom ATC is divided in steps where you simply pass through them by pressing SPACE everytime you got message to do it. after startup -> Grab ATIS and contact Ground Control hold short runway 3R -> contact Tower after takeoff -> contact Departure when you arrive at the last waypoint -> Grab ATIS and select the right information in the F10 menu to contact Approach around 5nm to Nellis AFB -> contact Tower After landing -> contact Ground for parking Emergency ->this will show up after departure clearance, you can select it anytime with F10 menu , if you are in trouble Nellis ATC will let you land immediately, firetrucks will wait you at the end of the runway. How Custom ATC works: Emergency landing: NOTES: - there COULD be some bugs on ATC voice overs (mostly VOs cutting each others or missing) , please report if any. I've tried all the missions as much as I could , if there are some bugs please report. Edited October 10, 2019 by beppe_goodoldrebel 2 3
beppe_goodoldrebel Posted October 10, 2019 Author Posted October 10, 2019 No SEAD mission for now , will wait HARM implementation.
Rudel_chw Posted October 10, 2019 Posted October 10, 2019 Thanks for sharing .. it will be the first F-16 Campaign that I will fly :) For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra For Gaming: 34" Monitor - Ryzen 3600 - 32 GB DDR4 2400 - nVidia RTX2080 - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar Mobile: iPad Pro 12.9" of 256 GB
JagHond Posted October 10, 2019 Posted October 10, 2019 :thumbup: :thumbup: :thumbup: You announced it, and you did it. Thanks a lot, mate! With best regards.
assafm25 Posted October 10, 2019 Posted October 10, 2019 Thanks! How do I install this? As a single mission? [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. -------------
beppe_goodoldrebel Posted October 10, 2019 Author Posted October 10, 2019 Thanks! How do I install this? As a single mission? Put all files in the folder DCS/Mods/aircraft/F16/Missions/Campaigns You can both use the campaign or play the single missions alone.
donkeyrider Posted October 11, 2019 Posted October 11, 2019 Thank you very much. This will be my weekend activities!
assafm25 Posted October 11, 2019 Posted October 11, 2019 I fly your missions since the f-18. Thank u for your great work ! [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. -------------
Viking 1-1 Posted October 11, 2019 Posted October 11, 2019 So I just flew Mission 2. It was counted as successful, i had the "press spacebar" comms all working, but during flight Springfield did not talk to me. Is this normal or what did I miss? Radion was on and frequencies according to the briefing... Before you call everything a "bug": RTFM & try again! Thank you. :music_whistling: I9-9900k, 32 GB RAM, Geforce RTX 2080 TI, 128 GB M2 SSD, 1 TB SSD, Track IR, Warthog Hotas
beppe_goodoldrebel Posted October 11, 2019 Author Posted October 11, 2019 Springfield 1 is on 305 UHF (Channel 1), I'll check later today.
Viking 1-1 Posted October 11, 2019 Posted October 11, 2019 Springfield 1 is on 305 UHF (Channel 1), I'll check later today. Ok, then I think I had the wrong UHF tuned… I took the one written in the briefing, think thats only Nellis... I will replay the first two missions then, Need to practice Formation flying anyway. ;-) Thanks for your work! Before you call everything a "bug": RTFM & try again! Thank you. :music_whistling: I9-9900k, 32 GB RAM, Geforce RTX 2080 TI, 128 GB M2 SSD, 1 TB SSD, Track IR, Warthog Hotas
beppe_goodoldrebel Posted October 11, 2019 Author Posted October 11, 2019 Ok, then I think I had the wrong UHF tuned… I took the one written in the briefing, think thats only Nellis... I will replay the first two missions then, Need to practice Formation flying anyway. ;-) Thanks for your work! All ATC channels are in the VHF radio. Springfield 1 is set in UHF Channel 1 , also ,it's the default freq. for player's group.
Whiskeybravo Posted October 11, 2019 Posted October 11, 2019 This looks like great fun. Does the custom ATC work with VA/VAICOM? Cheers, WB.
beppe_goodoldrebel Posted October 11, 2019 Author Posted October 11, 2019 This looks like great fun. Does the custom ATC work with VA/VAICOM? Cheers, WB. Oh well , I wish it could... but it's just all scripted material that you can interact with by pressing "SPACEBAR" so voice recognition is useless.
Pamenchan Posted October 11, 2019 Posted October 11, 2019 Love those missions (i've done the hornet version). But night missions are a bit weird, the viper has no external lighting, nor NVG, for now...
Viking 1-1 Posted October 18, 2019 Posted October 18, 2019 So I re-started it and everything was fine. As I said, I tuned the wrong frequencies. But on Mission 4 (AAR & Dogfight) Shell is not talking to me, so that I can not refuel. I´m behind the tanker, so I found it already with Tacan, and I´m on CH 7 VHF (141.00) but he doesn´t respond. Calling the tanker via the F10 Menu doesn´t work as well… P.S.: At the very begining there is a little mistake: Screen text says ATIS is on CH 2, but it is on CH 20 like the missions before. Before you call everything a "bug": RTFM & try again! Thank you. :music_whistling: I9-9900k, 32 GB RAM, Geforce RTX 2080 TI, 128 GB M2 SSD, 1 TB SSD, Track IR, Warthog Hotas
Sephroth Posted October 18, 2019 Posted October 18, 2019 So I re-started it and everything was fine. As I said, I tuned the wrong frequencies. But on Mission 4 (AAR & Dogfight) Shell is not talking to me, so that I can not refuel. I´m behind the tanker, so I found it already with Tacan, and I´m on CH 7 VHF (141.00) but he doesn´t respond. Calling the tanker via the F10 Menu doesn´t work as well… P.S.: At the very begining there is a little mistake: Screen text says ATIS is on CH 2, but it is on CH 20 like the missions before.I think I had that problem, turn off easy comms in the main menu and it will work. It did for me at least. Sent from my SM-N975U using Tapatalk
Viking 1-1 Posted October 19, 2019 Posted October 19, 2019 I think I had that problem, turn off easy comms in the main menu and it will work. It did for me at least. Sent from my SM-N975U using Tapatalk Ok, I will give that a try. Before you call everything a "bug": RTFM & try again! Thank you. :music_whistling: I9-9900k, 32 GB RAM, Geforce RTX 2080 TI, 128 GB M2 SSD, 1 TB SSD, Track IR, Warthog Hotas
-Painter- Posted October 19, 2019 Posted October 19, 2019 @pamenchan The Viper has NVG. Look for "toggle goggles" (RShift+H). Regards REAPER 31 | Painter [sIGPIC][/sIGPIC]
beppe_goodoldrebel Posted October 20, 2019 Author Posted October 20, 2019 So I re-started it and everything was fine. As I said, I tuned the wrong frequencies. But on Mission 4 (AAR & Dogfight) Shell is not talking to me, so that I can not refuel. I´m behind the tanker, so I found it already with Tacan, and I´m on CH 7 VHF (141.00) but he doesn´t respond. Calling the tanker via the F10 Menu doesn´t work as well… P.S.: At the very begining there is a little mistake: Screen text says ATIS is on CH 2, but it is on CH 20 like the missions before. I think I had that problem, turn off easy comms in the main menu and it will work. It did for me at least. Sent from my SM-N975U using Tapatalk Yep , turn off easy comms. Will fix message of ATIS , I'm sure kneeboard is OK though.
Covurt Posted October 20, 2019 Posted October 20, 2019 Just flew mission 2 Formation flight around the NTTR. Got to WP 5 and the F5 says bring up ATIS get the information and RTB. I lost the F5 in the turn so just returned to base. Knowing I probably failed the mission I went to re-fly it and the whole campaign reset to the beginning. Not a big deal just want to report.
Sephroth Posted October 21, 2019 Posted October 21, 2019 When you fail a mission you have to quit, not end the mission. Sent from my SM-N975U using Tapatalk
Covurt Posted October 21, 2019 Posted October 21, 2019 That shouldn't restart the campaign. Well at least I don't remember that happening before.
beppe_goodoldrebel Posted October 21, 2019 Author Posted October 21, 2019 Just flew mission 2 Formation flight around the NTTR. Got to WP 5 and the F5 says bring up ATIS get the information and RTB. I lost the F5 in the turn so just returned to base. Knowing I probably failed the mission I went to re-fly it and the whole campaign reset to the beginning. Not a big deal just want to report. When you fail a mission you have to quit, not end the mission. Sent from my SM-N975U using Tapatalk Sephroth got it right. When Springfield 1 tells you to RTB listen to ATIS and choose the right information in the F10 menu. This allows you to contact Nellis Approach via channel 6 VHF. You can do all without follow the F5s at this point. If in doubt just look at the 2 videos in the first post.
Covurt Posted October 23, 2019 Posted October 23, 2019 That's all well and good. It still shouldn't restart the campaign if you don't press the right button after. I don't build campaigns but I would think you'd be stuck on the same mission until you complete it instead of the whole campaign restarting. But, like I said it's on the second mission so not a huge deal. Just an odd way to deal with a mission failure.
Recommended Posts