DeathAngel1 Posted December 18, 2019 Posted December 18, 2019 (edited) Cant release CM802 and LS-6 after today`s OB update, pls help. Edited February 10, 2020 by uboats ..:NAVY PILOTS ARE THE THE BEST PILOTS:..
razo+r Posted December 18, 2019 Posted December 18, 2019 (edited) Both worked fine for me in MP and SP. Maybe you need to check your procedure. Edited December 18, 2019 by razo+r
roxmate Posted December 18, 2019 Posted December 18, 2019 Can confirm, in MP, can't launch the AKG, did all the correct procedures but it will not fire, in SP it worked fine.
uboats Posted December 19, 2019 Posted December 19, 2019 check this first https://forums.eagle.ru/showthread.php?t=245066 and also try to add RP manually in UFCP and see [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
DeathAngel1 Posted December 19, 2019 Author Posted December 19, 2019 Tried repair, but still cant launch CM-802 and LS-6. I make everything that i need to do for launch. See track pls. :(CM 802 launch bug.trk ..:NAVY PILOTS ARE THE THE BEST PILOTS:..
mtd2811 Posted December 19, 2019 Posted December 19, 2019 Try firing at TOO mode? Use tpod to lock Sent from my iPhone using Tapatalk
DeathAngel1 Posted December 19, 2019 Author Posted December 19, 2019 (edited) Try firing at TOO mode? Use tpod to lock Sent from my iPhone using Tapatalk ? There are not TOO mode in CM802. See track, pls. It has DIR, MAN and COO mode. I`ve tried them all and still wont launch. Tried repair DCS also, still the same. Edited December 19, 2019 by DeathAngel1 ..:NAVY PILOTS ARE THE THE BEST PILOTS:..
roxmate Posted December 19, 2019 Posted December 19, 2019 Can confirm, after repairing DCS and reinstalling the JF-17, the issue still persists, in MP.
DeathAngel1 Posted December 19, 2019 Author Posted December 19, 2019 No one can help? I dont know what else I can do, I`ve tried everything. I even reinstall my JF-17 module. So sad that 802 and some of other smart weapons are broken after update.... :( ..:NAVY PILOTS ARE THE THE BEST PILOTS:..
J20Stronk Posted December 19, 2019 Posted December 19, 2019 (edited) I had this issue only after I re-armed the CM-802AKG. I joined an MP server with a cold and dark JF-17, no weapons were preloaded. I loaded 2 AKGs and the DL pod. Those first 2 I fired and successfully guided them to their PP targets. After landing and rearming another 2 AKGs, those failed to fire. Also I could not cycle between my PP targets with the second pair; I could with the first 2. And the warm-up timer got stuck at 3:00 minute alignment after I turned them off and on again in attempt to try and fix the issue. I have also seen this happen with C-701s, where the cooldown timer stays at 3:00 and does not countdown if shutdown and resatrted after rearming them. EDIT: After playing around with them some more, I found out that the CM-802AKG will not fire above 24,600 ft. RDY is crossed out below the ALIGN window in the SMS page if I go above that altitude, but gets reverts back if I go below said altitude, even if the Alignment is not completed. The frozen alignment issue is still present if I turn the missile off, then back on again, but you can reset it by clearing the stores and manually loading them in the SMS' LOAD page. That will allow the alignment process to run again. Edited December 19, 2019 by J20Stronk
foxwxl Posted December 20, 2019 Posted December 20, 2019 AKG has a min/max launching altitude restriction of 500m-7500m and a launching speed limit of M0.9 implemented with DEC 19th update. If U're outside these parameters, the missile won't be able to launch. Deka Ironwork Tester Team
J20Stronk Posted December 20, 2019 Posted December 20, 2019 Ok then, the AKG launch is working as intended. However, the LS6 and GB6 still suffer from the reported launch bug, as RDY is crossed out regardless of altitude and speed. Also, the ALIGN bug I described still persists with all A/G smart munitions.
uboats Posted December 20, 2019 Posted December 20, 2019 noticed the align issue, fixed internally. will check LS/GB6 soon. [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
uboats Posted December 20, 2019 Posted December 20, 2019 no one gave any reproduce procedures .... [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
some1 Posted December 20, 2019 Posted December 20, 2019 Hmm, didn't have any problems dropping LS6 yesterday, at least in SP. Hardware: VPForce Rhino, FSSB R3 Ultra, Virpil WarBRD, Hotas Warthog, Winwing F15EX, Slaw Rudder, GVL224 Trio Throttle, Thrustmaster MFDs, Saitek Trim wheel, Trackir 5, Quest Pro
DeathAngel1 Posted December 20, 2019 Author Posted December 20, 2019 See picture. Alling time is gone, master arm ON, weapon power ON, I`ve done all the procedures. And RDY is still crossed, cant launch CM-802AKG. Why??? ..:NAVY PILOTS ARE THE THE BEST PILOTS:..
roxmate Posted December 20, 2019 Posted December 20, 2019 In MP for some reason, using the AKG in DIR mode did nothing, however, changing it to COO and inputing coordinates, seemed to have worked fine. In regards to the LS6, everything was setup to launch it, but when the bomb release but was pressed, nothing happened, it stayed in the Pylons.
AeriaGloria Posted December 22, 2019 Posted December 22, 2019 See picture. Alling time is gone, master arm ON, weapon power ON, I`ve done all the procedures. And RDY is still crossed, cant launch CM-802AKG. Why??? I heard that a recent patch induced a Mach .9 speed limit for dropping C-802, were you going over that speed maybe? Black Shark Den Squadron Member: We are open to new recruits, click here to check us out or apply to join! https://blacksharkden.com
DeathAngel1 Posted December 22, 2019 Author Posted December 22, 2019 No Gloria, im not over that's speed. ..:NAVY PILOTS ARE THE THE BEST PILOTS:..
L0op8ack Posted December 22, 2019 Posted December 22, 2019 .trk file please, it will make our debugging life easier.
DeathAngel1 Posted December 22, 2019 Author Posted December 22, 2019 .trk file please, it will make our debugging life easier. I was posted a track file a few days ago... Im curious, how no one from Deka`s team didnt take a look of it and take care for this serious bug. With this bug you practically cant use smart weapons, like 802AKG, GB-6 or LS-500, because "RDY" symbol is crossed and you cant launch a missile. So im posting new track again. Hope this time someone will take care of it. Thanks.Smart weapons RDY crossed BUG.trk ..:NAVY PILOTS ARE THE THE BEST PILOTS:..
roxmate Posted December 22, 2019 Posted December 22, 2019 I already figured whats going on. I was having issues in MP after rearming the missiles would not fire, the "RDY" would be crossed. Eventually I tried pressing the OSB that corresponds to A/S1 and then on the subpage choose the pylon corresponding to the weapon i wanted to fire, let's say A/S3. After that it worked like a charm. Try it out and see what happens.
Docsnuggles Posted January 3, 2020 Posted January 3, 2020 (edited) no one gave any reproduce procedures .... Hi, i have the following issue; I start from Kobuleti with GB6, fire both, everything ok, land, rearm, cold or hot, both same issue (full alignement, full restart of engine, INS update etc). After takeoff the GB6 are ready, but wont fire, even after 10 minutes; the ranging circle appears sometimes very close, sometimes not at all; wp40 is correct, all looks fine, but it does not get the target in the HSD or will fire; BRM work, Mk-20 work, but the "smart" bnomb GB-6 not. :/ Procedure is absolutely reproducable, sorry for no logfile. Edit: Targeting pod / TOO mode. In first run it works, after rearm not. Only SP, I dont play MP yet. Edited January 3, 2020 by Docsnuggles
witness_me Posted January 3, 2020 Posted January 3, 2020 (edited) Hi, i have the following issue; I start from Kobuleti with GB6, fire both, everything ok, land, rearm, cold or hot, both same issue (full alignement, full restart of engine, INS update etc). After takeoff the GB6 are ready, but wont fire, even after 10 minutes; the ranging circle appears sometimes very close, sometimes not at all; wp40 is correct, all looks fine, but it does not get the target in the HSD or will fire; BRM work, Mk-20 work, but the "smart" bnomb GB-6 not. :/ Procedure is absolutely reproducable, sorry for no logfile. Edit: Targeting pod / TOO mode. In first run it works, after rearm not. Only SP, I dont play MP yet. how high were you flying? Try >10k ft, they to be up high and moving fast in order to glide, ideally release from 30-40k ft or more @1.6 mach Edited January 3, 2020 by witness_me
Docsnuggles Posted January 3, 2020 Posted January 3, 2020 (edited) how high were you flying? Try >10k ft, they to be up high and moving fast in order to glide, ideally release from 30-40k ft or more @1.6 mach I tried different approaches; as I stated, before rearm everything is fine, after it is crap; sometimes the SPI is really weired also, one i had in space.... Just try it youself and you will see. Edit: after repair (steam version) everything is fine again. Edited January 11, 2020 by Docsnuggles
Recommended Posts