chief Posted February 8, 2020 Posted February 8, 2020 (edited) I have my CMS press down (for the lack of description cause if you have the TM stick you'll know which button I am talking about) mapped for trim in the Huey. Recently When I push the stick forward at about 60% full forward deflection and then press the cms button to trim the huey, the cms doesn't trigger the command. If I let the stick go neutral, then the CMS button works. Even If I pull the stick back it works. Just not when i push it forward. Taking a look of newbifiers teardown of the stick on youtube, there shouldnt be any conflicts within the stick itself to cause this. No wires stretching or anything like that. Anyone have this or have any ideas for me to solve this? Thanks Now that I test it more the pinky, trigger, thumb and hat stop working at 60% Edited February 8, 2020 by chief
chief Posted February 8, 2020 Author Posted February 8, 2020 I forgot to mention. This stick is on a WarBRD base.
HC_Official Posted February 8, 2020 Posted February 8, 2020 (edited) use the VPC joytester to monitor your stick while pressing buttons and moving it, most likely you have a bad cable that runs from the warbrd base to the grip, you will have to contact virpil support ....... Edited February 8, 2020 by HC_Official No more pre-orders Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. .
Lange_666 Posted March 11, 2020 Posted March 11, 2020 Cable problem?: https://forum.virpil.com/index.php?/topic/1423-warbrd-base-cable-breaking-issue/ Win11 Pro 64-bit, Ryzen 5800X3D, Corsair H115i, Gigabyte X570S UD, EVGA 3080Ti XC3 Ultra 12GB, 64 GB DDR4 G.Skill 3600. Monitors: LG 27GL850-B27 2560x1440 + Samsung SyncMaster 2443 1920x1200, HOTAS: Warthog with Virpil WarBRD base, MFG Crosswind pedals, TrackIR4, Rift-S, Elgato Streamdeck XL. Personal Wish List: A6 Intruder, Vietnam theater, decent ATC module, better VR performance!
eatthis Posted June 19, 2020 Posted June 19, 2020 iv got 2 warbrd bases, both have gone the same way at the same time leaving me without a stick! 7700k @5ghz, 32gb 3200mhz ram, 2080ti, nvme drives, valve index vr
Shaemus ODonnelly Posted June 21, 2020 Posted June 21, 2020 Had the same problem but while pulling more tha 20% back. It was a simple cable break, quickly resolved by Virpil support, they sent me a new cable which was very easy to install and that fixed it.
Waxer Posted June 22, 2020 Posted June 22, 2020 I recently had a problem with a WarBRD grip. Virpil customer services did not respond to me immediately, but they did respond after about two days. They asked some basic questions (inc. serial number, date of purchase) and then send me free of charge the part needed to fix the problem. So my experience of Virpil customer service has been positive. [sIGPIC][/sIGPIC]
Supmua Posted June 24, 2020 Posted June 24, 2020 Mine has been working fine *fingers crossed*, very early purchase if not day one. I even put an extension tube (15 cm) on it. PC: 5800X3D/4090, 11700K/3090, 9900K/2080Ti. Joystick bases: TMW, VPC WarBRD, MT50CM2, VKB GFII, FSSB R3L Joystick grips: TM (Warthog, F/A-18C), Realsimulator (F-16SGRH, F-18CGRH), VKB (Kosmosima LH, MCG, MCG Pro), VPC MongoosT50-CM2 Throttles: TMW, Winwing Super Taurus, Logitech Throttle Quadrant, Realsimulator Throttle (soon) VR: HTC Vive/Pro, Oculus Rift/Quest 2, Valve Index, Varjo Aero, https://forum.dcs.world/topic/300065-varjo-aero-general-guide-for-new-owners/
USA_Recon Posted October 10, 2020 Posted October 10, 2020 I had to fill out a support ticket today - similar issue except when I pull back on the stick the buttons don't work.
Recommended Posts