gachatar Posted June 7, 2021 Share Posted June 7, 2021 Great job with the new Viggen all-in-one screen, it reduced the time I spend head down by at least 90%. I have one feature request if possible, the A-10C UFC screen could really use a scratchpad display on the top of it. This is the line at the very bottom of your HUD and also the last line on the CDU that shows what you're typing in [BRACKETS]. It's pretty awkward to type on the android tablet without seeing if I made a typo. If you can't export just that one line of the HUD then maybe you could separately export just that one line of the CDU, to prevent the performance loss of exporting the full CDU when only using the UFC. 1 Link to comment Share on other sites More sharing options...
Foxx Posted June 7, 2021 Share Posted June 7, 2021 Hey I did a quick search of the thread and didn't see this mentioned, but are there any particular models of tablets recommended for use with this app, or a particular screen size and resolution for optimum compatibility? Thanks! Link to comment Share on other sites More sharing options...
pet333r Posted June 8, 2021 Author Share Posted June 8, 2021 On 6/7/2021 at 6:47 AM, gachatar said: Great job with the new Viggen all-in-one screen, it reduced the time I spend head down by at least 90%. I have one feature request if possible, the A-10C UFC screen could really use a scratchpad display on the top of it. This is the line at the very bottom of your HUD and also the last line on the CDU that shows what you're typing in [BRACKETS]. It's pretty awkward to type on the android tablet without seeing if I made a typo. If you can't export just that one line of the HUD then maybe you could separately export just that one line of the CDU, to prevent the performance loss of exporting the full CDU when only using the UFC. Pretty good idea, I will check the exportability of it, if it is possible, I think I can add it on the UFC panel 20 hours ago, Foxx said: Hey I did a quick search of the thread and didn't see this mentioned, but are there any particular models of tablets recommended for use with this app, or a particular screen size and resolution for optimum compatibility? Thanks! There is no special recommendation for devices. As for the system, the application works with Android from version 4.1 and above. I use it on an 8-year-old tablet with 1GB RAM and there are no problems, but it is known that the faster the hardware, the faster everything works. When it comes to size, I try to arrange the panels so that they look good on smaller and larger diagonals, some panels differ for smaller and larger diagonals so that they can be used well. From my own experience, however, I know that it is best operated on 10 "screens, but for example, having several different devices with different sizes, those with smaller screens can be used for less frequently operated panels. 1 1 Link to comment Share on other sites More sharing options...
pet333r Posted June 11, 2021 Author Share Posted June 11, 2021 New version 1.0.2021.0611 avaible - added F-16C CMDS & RWR panel - changed graphics of the MFD panel - automatic change of OSB buttons on the panel for individual modules - added screen dimming when selecting a panel to open - the buttons for handling panels in vertical mode have been changed - the display of the windows of individual modules panels on small screens has been fixed 2 Link to comment Share on other sites More sharing options...
GunSlingerAUS Posted June 23, 2021 Share Posted June 23, 2021 On 6/8/2021 at 7:42 AM, Foxx said: Hey I did a quick search of the thread and didn't see this mentioned, but are there any particular models of tablets recommended for use with this app, or a particular screen size and resolution for optimum compatibility? Thanks! I bought two Lenovo E10 and E7 tablets - cheap and work perfectly. 2 Intel 11900K/NVIDIA RTX 3090/32GB DDR4 3666/Z590 Asus Maximus motherboard/2TB Samsung EVO Pro/55" LG C9 120Hz @ 4K/Windows 10/Jotunheim Schiit external headphone amp/Virpil HOTAS + MFG Crosswind pedals Link to comment Share on other sites More sharing options...
Treker Posted June 24, 2021 Share Posted June 24, 2021 I use cheep CHUWI Hipad Tablet 3GB + 32GB. It works without any problems 1 Link to comment Share on other sites More sharing options...
Scipiooo Posted June 25, 2021 Share Posted June 25, 2021 hello Thx for this app. i have an issue, all my MFS does'nt work For JF17 it's ok, but FA18, F16 no response when i push button on my devices (3 diffents devices and same results) Did i miss something ? Thx a lot Link to comment Share on other sites More sharing options...
pet333r Posted June 25, 2021 Author Share Posted June 25, 2021 39 minutes ago, Scipiooo said: hello Thx for this app. i have an issue, all my MFS does'nt work For JF17 it's ok, but FA18, F16 no response when i push button on my devices (3 diffents devices and same results) Did i miss something ? Thx a lot Are you talking about OSB buttons on MFD panels? if so, on the MFD panel for F-16 / FA-18, click somewhere in the middle and select from the menu which panel you want to use Link to comment Share on other sites More sharing options...
Scipiooo Posted June 25, 2021 Share Posted June 25, 2021 2 minutes ago, pet333r said: Are you talking about OSB buttons on MFD panels? if so, on the MFD panel for F-16 / FA-18, click somewhere in the middle and select from the menu which panel you want to use yes the OSB button I click on the middle, selected left, right or center, but nothing work Link to comment Share on other sites More sharing options...
pet333r Posted June 25, 2021 Author Share Posted June 25, 2021 Just now, Scipiooo said: yes the OSB button I click on the middle, selected left, right or center, but nothing work Try to clean the application data in the system and try again (you will have to enter the PC IP address in the settings again), maybe something went wrong in the system Link to comment Share on other sites More sharing options...
Scipiooo Posted June 25, 2021 Share Posted June 25, 2021 4 minutes ago, pet333r said: Try to clean the application data in the system and try again (you will have to enter the PC IP address in the settings again), maybe something went wrong in the system How can i clean the app data ? Ccleaner or uninstalling the script and reinstaling it ? Link to comment Share on other sites More sharing options...
pet333r Posted June 25, 2021 Author Share Posted June 25, 2021 6 minutes ago, Scipiooo said: How can i clean the app data ? Ccleaner or uninstalling the script and reinstaling it ? No, on device. Settings > Apps > DCS UFC > Properties Link to comment Share on other sites More sharing options...
Scipiooo Posted June 25, 2021 Share Posted June 25, 2021 Just now, pet333r said: No, on device. Settings > Apps > DCS UFC > Properties ok thx i'll try and report it thx dude Link to comment Share on other sites More sharing options...
Scipiooo Posted June 25, 2021 Share Posted June 25, 2021 (edited) 33 minutes ago, pet333r said: No, on device. Settings > Apps > DCS UFC > Properties nope doesn't work, uninstaling script and reinstaling uninstaling apps on the 3 devices and reinstaling Edited June 25, 2021 by Scipiooo add some info Link to comment Share on other sites More sharing options...
pet333r Posted June 25, 2021 Author Share Posted June 25, 2021 14 minutes ago, Scipiooo said: nope doesn't work Other buttons on other panels on the same device work? Try to change which panel to use from the settings in the application. After changing the panel you have a 'indicator' in the corner of the panel which is selected (L/R/C)? Link to comment Share on other sites More sharing options...
Scipiooo Posted June 25, 2021 Share Posted June 25, 2021 (edited) 4 minutes ago, pet333r said: Other buttons on other panels on the same device work? Try to change which panel to use from the settings in the application. After changing the panel you have a 'indicator' in the corner of the panel which is selected (L/R/C)? Yes there other buttons on other panel for each modules works fine (JF17 i can push ont the MFD button and work), I tried to change panel in mfd for L/R/C and no indications in the corner appears. Just a message tell me L/R/C selected but buttons doesn't work ans no indicator on corner Edited June 25, 2021 by Scipiooo Link to comment Share on other sites More sharing options...
pet333r Posted June 25, 2021 Author Share Posted June 25, 2021 7 minutes ago, Scipiooo said: Yes there other buttons on other panel for each modules works fine (JF17 i can push ont the MFD button and work), I tried to change panel in mfd for L/R/C and no indications in the corner appears JF17 is running on the same device for you and the LCD data on the UFC panel for the F-18 is displayed? Link to comment Share on other sites More sharing options...
Scipiooo Posted June 25, 2021 Share Posted June 25, 2021 Just now, pet333r said: JF17 fonctionne sur le même appareil pour vous et les données LCD sur le panneau UFC pour le F-18 sont affichées ? yes jf17 work on the sames devices (works for the 3 devices connected) no display on UFC in the apps but work in DCS, i can put tacan, ILS, D/L and A/P from the app Link to comment Share on other sites More sharing options...
pet333r Posted June 25, 2021 Author Share Posted June 25, 2021 2 minutes ago, Scipiooo said: yes jf17 work on the sames devices (works for the 3 devices connected) no display on UFC in the apps but work in DCS, i can put tacan, ILS, D/L and A/P from the app Ok, I already know what's going on. Check the IP address of your Android devices and enter these addresses in the Config.lua file located in the script folder Link to comment Share on other sites More sharing options...
Scipiooo Posted June 25, 2021 Share Posted June 25, 2021 4 minutes ago, pet333r said: Ok, je sais déjà ce qui se passe. Vérifiez l'adresse IP de vos appareils Android et saisissez ces adresses dans le fichier Config.lua situé dans le dossier script XD i'm a big dumb, in Config.lua, put my ip on 192.168.0.14 but in reality was 192.168.1.14 thx for your help, now work fine 1 Link to comment Share on other sites More sharing options...
pet333r Posted June 25, 2021 Author Share Posted June 25, 2021 11 minutes ago, Scipiooo said: XD i'm a big dumb, in Config.lua, put my ip on 192.168.0.14 but in reality was 192.168.1.14 thx for your help, now work fine no problem 1 Link to comment Share on other sites More sharing options...
Roger01 Posted July 3, 2021 Share Posted July 3, 2021 Hello, thanks a lot for your app! Is it possible to have this configuration for the JF-17 in portrait? Thanks a lot again! Link to comment Share on other sites More sharing options...
pet333r Posted July 4, 2021 Author Share Posted July 4, 2021 Hello, thanks a lot for your app! Is it possible to have this configuration for the JF-17 in portrait? Thanks a lot again! Ok, I can add such a combination of these panels over time 2 Link to comment Share on other sites More sharing options...
pet333r Posted July 9, 2021 Author Share Posted July 9, 2021 New version 1.0.2021.0709 avaible - A-10C: changed UFC graphic panel - F-5E: added Radar Warning System - F/A-18C: changed right console to: ELEC / ECS / SNSR - F/A-18C: added lighting panel: internal/external - M2000C: updated PPA panel to the latest version of the module - FC3: added support for J-11A 1 Link to comment Share on other sites More sharing options...
MirabelleBenou Posted July 17, 2021 Share Posted July 17, 2021 Hello ! I have a small problem with the "map". I do not understand how it works ? At leat, it display a map, but it do not center on myself or show anything more than a map like a Google Map. Can you tell me how to ? Thanks ! 06th Multirole Helicopter Regiment Bataillon d'appui aérien - Escadrille HOG Link to comment Share on other sites More sharing options...
Recommended Posts