hawa0835 Posted December 23, 2021 Posted December 23, 2021 The FLIR image not look good, you can't see anything, especially in BH and WH, and the text on the screen is almost "invisible", and this applies to both Litening II and ATFLIR.
Tholozor Posted December 23, 2021 Posted December 23, 2021 Have you tried adjusting the BRT and CONT knobs on the DDI, or using manual level or gain controls in the pod itself? REAPER 51 | Tholozor VFA-136 (c.2007): https://www.digitalcombatsimulator.com/en/files/3305981/ Arleigh Burke Destroyer Pack (2020): https://www.digitalcombatsimulator.com/en/files/3313752/
Taz1004 Posted December 23, 2021 Posted December 23, 2021 (edited) 1 hour ago, Tholozor said: Have you tried adjusting the BRT and CONT knobs on the DDI, or using manual level or gain controls in the pod itself? Adjusting levels to extreme works but we shouldn't have to. I have to set levels to 9 for White hot and 2 for Black hot. And the settings are not saved for each so I have to adjust them whenever I switch. Edited December 23, 2021 by Taz1004 1 Better Smoke - Better Trees Caucasus - Better Trees Syria - Better Trees Mariana - Clear Canopy Glass
Sn8ke Posted December 24, 2021 Posted December 24, 2021 17 hours ago, Taz1004 said: Adjusting levels to extreme works but we shouldn't have to. I have to set levels to 9 for White hot and 2 for Black hot. And the settings are not saved for each so I have to adjust them whenever I switch. Not sure how far into infrared technology ED went with this last update, however IRL gains and levels (Brightness and contrast) must be adjusted constantly, its based of frequencies of light, which vary from location to location, temperatures, atmospheric conditions such as temp/dewpoint spread, fog, etc. Asus Prime Gaming Wifi7 // Intel 14900K @5.5GHz // 64Gb DDR5 6000MHz // 3090 RTX // 4TB Samsung NVME M.2
fagulha Posted December 24, 2021 Posted December 24, 2021 Tested both F-16/F-18, night/day, ATFLIR, just fiddling with Brightness and contrast ( used MAN LVL too) as usually i do, and see no major issues. And AFAIK it´s independent in each MFD as in real airframes (VR user). But that´s me. About carrier ops: "The younger pilots are still quite capable of holding their heads forward against the forces. The older ones have been doing this too long and know better; sore necks make for poor sleep.' PC: 14th I7 14700KF 5.6ghz | 64GB RAM DDR5 5200 CL40 XMP | Gigabyte RTX 4080 Super Aero OC 16 GB RAM GDDR6X | Thermalright Notte 360 RGB | PSU Thermaltake Though Power GF A3 Snow 1050W ATX 3.0 PCIE 5.0 / 1 WD SN770 1TB M.2 NVME + 1 SSD M.2 2TB + 2x SSD SATA 500GB + 1 Samsung 990 PRO 4TB M.2 NVME (DCS only) | Valve Index| Andre´s JeatSeat.
Taz1004 Posted December 24, 2021 Posted December 24, 2021 46 minutes ago, fagulha said: Tested both F-16/F-18, night/day, ATFLIR, just fiddling with Brightness and contrast ( used MAN LVL too) as usually i do, and see no major issues. And AFAIK it´s independent in each MFD as in real airframes (VR user). But that´s me. It turns out it actually works okay. It's just that situation is reversed. Missions I used BH, I now have to use WH and vice versa. 1 Better Smoke - Better Trees Caucasus - Better Trees Syria - Better Trees Mariana - Clear Canopy Glass
fagulha Posted December 24, 2021 Posted December 24, 2021 2 hours ago, Taz1004 said: It turns out it actually works okay. It's just that situation is reversed. Missions I used BH, I now have to use WH and vice versa. Got it! Glad it in the end worked ok. About carrier ops: "The younger pilots are still quite capable of holding their heads forward against the forces. The older ones have been doing this too long and know better; sore necks make for poor sleep.' PC: 14th I7 14700KF 5.6ghz | 64GB RAM DDR5 5200 CL40 XMP | Gigabyte RTX 4080 Super Aero OC 16 GB RAM GDDR6X | Thermalright Notte 360 RGB | PSU Thermaltake Though Power GF A3 Snow 1050W ATX 3.0 PCIE 5.0 / 1 WD SN770 1TB M.2 NVME + 1 SSD M.2 2TB + 2x SSD SATA 500GB + 1 Samsung 990 PRO 4TB M.2 NVME (DCS only) | Valve Index| Andre´s JeatSeat.
CBStu Posted December 30, 2021 Posted December 30, 2021 I know it might be considered a bit of a cheat but, when I can't see what I think I should be able to, I hit active pause. Then I try out every adjustment and every view option I can find. It is amazing how these change things. One mission using ATFLIR I need to take out two trucks parked next to a Mig. There are some combinations of adjustments where I can't even see the trucks. In the same mission I need to take out two SAM launchers. I slowly figured out that I need to fly higher to get more range for the JDAMs so I can stay out of the SAM range. Otherwise the smoke created by a SAM launch completely blocks visibility and I have to fly around waiting for the smoke to clear. I found here too that some combinations of adjustments let me see 'through' the smoke better than others.
Recommended Posts