Matchstick Posted January 26, 2023 Posted January 26, 2023 Has anyone worked out how to enter the planes initial position into the INS ? While the manual covers creating a waypoint it seems to skip over how to enter the starting position and I'm afraid I haven't been able to work it out yet.
Solution fausete Posted January 26, 2023 Solution Posted January 26, 2023 Hi! So the alignment starts when you press the asterisc button and takes the coordinates that are being shown in the screen of the INS as initial coordinates. So if your starting coordinates are correct, just press asterisc while in PP display mode. If they are not, you will have to introduce them into a waypoint in the list, have the display option POS selected and the waypoint with the correct starting position being displayed when pressing the asterisc to start the alignment. 1 1
Matchstick Posted January 26, 2023 Author Posted January 26, 2023 4 minutes ago, fausete said: Hi! So the alignment starts when you press the asterisc button and takes the coordinates that are being shown in the screen of the INS as initial coordinates. So if your starting coordinates are correct, just press asterisc while in PP display mode. If they are not, you will have to introduce them into a waypoint in the list, have the display option POS selected and the waypoint with the correct starting position being displayed when pressing the asterisc to start the alignment. Right so a custom start position has to come from a waypoint ! That's just the information I was looking for. Cheers 1
fausete Posted January 26, 2023 Posted January 26, 2023 Basically yes, remember you can always change the waypoint used for the alignment to another position you want to use after the alignment has started. Cheers! 1 1
MAXsenna Posted January 26, 2023 Posted January 26, 2023 Haven't gotten around to test this yet. It is similar to the M2000?Cheers! Sent from my MAR-LX1A using Tapatalk
bones1014 Posted January 26, 2023 Posted January 26, 2023 2 hours ago, Matchstick said: Has anyone worked out how to enter the planes initial position into the INS ? While the manual covers creating a waypoint it seems to skip over how to enter the starting position and I'm afraid I haven't been able to work it out yet. Which manual covers adding a waypoint? The ones I have in my Doc folder are for the CE.
Matchstick Posted January 26, 2023 Author Posted January 26, 2023 3 minutes ago, bones1014 said: Which manual covers adding a waypoint? The ones I have in my Doc folder are for the CE. The Mirage F1 Flight Manual.pdf has a section at the very end covering the changes for the EE version. 3
Vibora Posted January 29, 2023 Posted January 29, 2023 On 1/26/2023 at 10:32 AM, Matchstick said: While the manual covers creating a waypoint it seems to skip over how to enter the starting position and I'm afraid I haven't been able to work it out yet. In fact, it is explained in the manual: "To align with the current position, instead of the memorized position, select the current position waypoint with the waypoints selecting wheel. If the current position is not memorized in one of the waypoints from the waypoints list, then it will have to be created, see waypoint creation above. Select POS with the parameters selector, the current position coordinates will be shown in the PCN display. Select ALN. Press * button". 1 Roberto "Vibora" Seoane Alas Rojas [sIGPIC][/sIGPIC]
Nealius Posted February 1, 2023 Posted February 1, 2023 (edited) On 1/30/2023 at 3:19 AM, Vibora said: To align with the current position, instead of the memorized position, select the current position waypoint What is the current waypoint position, though? DCS start waypoint is 0. The waypoint select wheel starts at 1. Does 1 correlate with DCS waypoint 0, or with DCS waypoint 1? Disregard, found it: Quote Note: Waypoints in the INS go from 1 to 9, therefore waypoint 0 in the Mission Editor corresponds to waypoint 1 in the INS, and so on. Edited February 1, 2023 by Nealius 1 1
Recommended Posts