bal2o Posted June 29, 2023 Share Posted June 29, 2023 (edited) i think it's probably this mod https://drive.google.com/file/d/1O5pZWaXpmmRcvDqOX8qkryt-Urjr4bT4/view Edited June 29, 2023 by bal2o Link to comment Share on other sites More sharing options...
hotrod525 Posted June 29, 2023 Share Posted June 29, 2023 Yeah i went into the .lua file and i just removed some "restriction" you can do it on your own, you need NOTEPAD+. The F15E .lua is located in the coremods/f15e in you're DCS install. Dont forget to make a backup file and if you have absolutely no clue what your are doing, take some time on google to learn a bit about it. So far, GBU31 work for sure, i havent test GBU38, GBU54 dosent show up on page, GBU15 dosent work, nor MAV / AGM130 / AGM 154. On the other end, AIM9X does work, GBU27 and GBU28 also work. So it's a sort a "try and error". I think those last 2 werent add into the release due to "old model". But i dont mind so much. PS : This is an early acces, modifying the .lua to access unfinished feature come with possibles issues. 1 Link to comment Share on other sites More sharing options...
shagrat Posted June 29, 2023 Share Posted June 29, 2023 Am 26.6.2023 um 18:21 schrieb bal2o: hope it's not for end of year or next year ... F15 + gbu38 will be amazing. Actually with our loadout it's not possible to strike in mission with many SAM. Well, actually you should have a SEAD/DEAD flight and an escort of F-15C... Multirole does not mean everything at once. JDAM and JSOW are nice, but LGB and toss bombing are your friend, as well. 1 Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore) Link to comment Share on other sites More sharing options...
bal2o Posted June 29, 2023 Share Posted June 29, 2023 2 hours ago, shagrat said: Well, actually you should have a SEAD/DEAD flight and an escort of F-15C... Multirole does not mean everything at once. JDAM and JSOW are nice, but LGB and toss bombing are your friend, as well. yes ofc, but i realy love jdam ^^ but yes we have enought in this EA for fun Link to comment Share on other sites More sharing options...
Bunny Clark Posted June 30, 2023 Share Posted June 30, 2023 7 hours ago, shagrat said: Multirole does not mean everything at once. If you believe Dassault, that's what "omnirole" means ... Oil In The Water Hornet Campaign. Bunny's: Form-Fillable Controller Layout PDFs | HOTAS Kneeboards | Checklist Kneeboards Link to comment Share on other sites More sharing options...
piolin23000 Posted June 30, 2023 Share Posted June 30, 2023 10 hours ago, hotrod525 said: Yeah i went into the .lua file and i just removed some "restriction" you can do it on your own, you need NOTEPAD+. The F15E .lua is located in the coremods/f15e in you're DCS install. Dont forget to make a backup file and if you have absolutely no clue what your are doing, take some time on google to learn a bit about it. So far, GBU31 work for sure, i havent test GBU38, GBU54 dosent show up on page, GBU15 dosent work, nor MAV / AGM130 / AGM 154. On the other end, AIM9X does work, GBU27 and GBU28 also work. So it's a sort a "try and error". I think those last 2 werent add into the release due to "old model". But i dont mind so much. PS : This is an early acces, modifying the .lua to access unfinished feature come with possibles issues. can you tell us wich one line need to modify to use the JDAM bombs please? thanks for your time Link to comment Share on other sites More sharing options...
H60MTI Posted June 30, 2023 Author Share Posted June 30, 2023 IF I did it right, there's multiple lines. I figured it out by looking at it. It's actually really simple. I was surprised at what they setup the Eagle to carry from the beginning. Former SSG US Army UH-60A/L/M Crewchief "2 To Fly!" Link to comment Share on other sites More sharing options...
hotrod525 Posted June 30, 2023 Share Posted June 30, 2023 (edited) 6 hours ago, piolin23000 said: can you tell us wich one line need to modify to use the JDAM bombs please? thanks for your time There is a few ones to edits, but whenever you'll open the lua file you'll see green text within "--{" .... "}--", the "--{}--" are some sort of "stop" in lua code (to be honest i barely know that stuff, just enought to understand the very very basics) when you remove them, it allow the code to be "read". There is left and right pylon for AIM9X, and some GBU/AGMs, then you have a left CFT text-bloc and a right CFT text-bloc. By simply reading the line you'll sort it out. You can also access Litening and Sniper pod, Litenin is clearly WIP you got boot sequence and some stuff but is non-fonctional, Sniper is totaly non fonctional. Edited June 30, 2023 by hotrod525 1 Link to comment Share on other sites More sharing options...
H60MTI Posted June 30, 2023 Author Share Posted June 30, 2023 I saw the pods too. I didn't mess with those since I didn't see the ASQ-28 ATFLIR on there. I did free up AIM-9X for the wings. I also did the JDAMs and the AFM-154 series. I haven't tried anything yet cause that was at about 10:30pm last night and wanted to go to bed. I'll try it tonight after work or tomorrow. Could of all been for nothing. Former SSG US Army UH-60A/L/M Crewchief "2 To Fly!" Link to comment Share on other sites More sharing options...
piolin23000 Posted June 30, 2023 Share Posted June 30, 2023 6 hours ago, hotrod525 said: There is a few ones to edits, but whenever you'll open the lua file you'll see green text within "--{" .... "}--", the "--{}--" are some sort of "stop" in lua code (to be honest i barely know that stuff, just enought to understand the very very basics) when you remove them, it allow the code to be "read". There is left and right pylon for AIM9X, and some GBU/AGMs, then you have a left CFT text-bloc and a right CFT text-bloc. By simply reading the line you'll sort it out. You can also access Litening and Sniper pod, Litenin is clearly WIP you got boot sequence and some stuff but is non-fonctional, Sniper is totaly non fonctional. Ok, thank you i try it and working perfect now i have the JDAM 31, 38 Link to comment Share on other sites More sharing options...
Zahnatom Posted June 30, 2023 Share Posted June 30, 2023 5 hours ago, hotrod525 said: "--{" .... "}--", the "--{}--" are some sort of "stop" "--" turns the line into a comment "--[[" starts a multi-line comment "]]--" ends a multiline comment. anything that is a comment is ignored by the program. My beloved https://github.com/zahnatom/dcsmods/tree/main Link to comment Share on other sites More sharing options...
hotrod525 Posted July 2, 2023 Share Posted July 2, 2023 On 6/30/2023 at 9:53 AM, H60MTI said: I saw the pods too. I didn't mess with those since I didn't see the ASQ-28 ATFLIR on there. I did free up AIM-9X for the wings. I also did the JDAMs and the AFM-154 series. I haven't tried anything yet cause that was at about 10:30pm last night and wanted to go to bed. I'll try it tonight after work or tomorrow. Could of all been for nothing. JDAM work well in "direct mode", i release level from 4nm away and they hit 9 times out of 10. As for AGM's i dont know, most seem non-fonctional. On 6/30/2023 at 2:41 PM, Zahnatom said: "--" turns the line into a comment "--[[" starts a multi-line comment "]]--" ends a multiline comment. anything that is a comment is ignored by the program. thanks mate Link to comment Share on other sites More sharing options...
bal2o Posted July 3, 2023 Share Posted July 3, 2023 On 7/2/2023 at 3:29 AM, hotrod525 said: JDAM work well in "direct mode", i release level from 4nm away and they hit 9 times out of 10. As for AGM's i dont know, most seem non-fonctional. thanks mate direct mode ? by using TPOD designate function ? So it's may be possible to use wpt no ? => 1) add WPT 2) slave tpod to wpt 3) tdc depress 4) release and k-boom Did you try GBU38 ? at more distance ? (4Nm for DEAD is not very usefull ^^) Link to comment Share on other sites More sharing options...
dorianR666 Posted July 3, 2023 Share Posted July 3, 2023 (edited) 8 minutes ago, bal2o said: direct mode ? direct mode means you press weapon release button and the jdam will drop, with no assistence on mfds or hud. you will not see any DLZ and the plane will not prevent you from releasing the bomb at the wrong time. you have to guesstimate when to release the jdam because no DLZ. it guides to target designation, source doesnt matter. this already works in DCS. Edited July 3, 2023 by dorianR666 CPU: AMD Ryzen 5 1600X GPU: AMD RX 580 Link to comment Share on other sites More sharing options...
bal2o Posted July 3, 2023 Share Posted July 3, 2023 5 minutes ago, dorianR666 said: direct mode means you press weapon release button and the jdam will drop, with no assistence on mfds or hud. you will not see any DLZ and the plane will not prevent you from releasing the bomb at the wrong time. you have to guesstimate when to release the jdam because no DLZ. it guides to target designation, source doesnt matter. this already works in DCS. ok but i missed something : how jdam know where to go ? Link to comment Share on other sites More sharing options...
Bazz_Mulder Posted July 3, 2023 Share Posted July 3, 2023 2 hours ago, bal2o said: ok but i missed something : how jdam know where to go ? From target designation on TPOD for ex. Then coordinates are punched into the smart(eh?) bomb so it knows where to land. Kowalsky - "Fox 3" means that you have commitment issues Link to comment Share on other sites More sharing options...
dorianR666 Posted July 3, 2023 Share Posted July 3, 2023 2 hours ago, bal2o said: how jdam know where to go they are connected to the airplane electronically and receive a message with the coordinates (among other things). CPU: AMD Ryzen 5 1600X GPU: AMD RX 580 Link to comment Share on other sites More sharing options...
bal2o Posted July 3, 2023 Share Posted July 3, 2023 ok ok, so designate with tpod but release without any information. i need to try that ^^ Link to comment Share on other sites More sharing options...
bal2o Posted July 3, 2023 Share Posted July 3, 2023 (edited) On 6/29/2023 at 9:30 PM, hotrod525 said: Yeah i went into the .lua file and i just removed some "restriction" you can do it on your own, you need NOTEPAD+. The F15E .lua is located in the coremods/f15e in you're DCS install. Dont forget to make a backup file and if you have absolutely no clue what your are doing, take some time on google to learn a bit about it. So far, GBU31 work for sure, i havent test GBU38, GBU54 dosent show up on page, GBU15 dosent work, nor MAV / AGM130 / AGM 154. On the other end, AIM9X does work, GBU27 and GBU28 also work. So it's a sort a "try and error". I think those last 2 werent add into the release due to "old model". But i dont mind so much. PS : This is an early acces, modifying the .lua to access unfinished feature come with possibles issues. and did you try CBU105 ? edit : ok i try, but it's not working (unguided). but 38/31 work like a charm : use tdc depress or target waypoint and boooom. love it Edited July 4, 2023 by bal2o Link to comment Share on other sites More sharing options...
Zahnatom Posted July 31, 2023 Share Posted July 31, 2023 19 hours ago, nellisagrs said: In order to enable the aim-9x, what would i have to delete here? And do i also have to do it for every entry of aim9x? move the --[[ from before the "{ CLSID " to after the closing }. each opening { had a corresponding closing } i hope that helps you find the correct one. or just remove all of the --[[ and --]] its all lua so if you want more info on comments in lua you can read here for example Lua Programming/comment - Wikibooks, open books for an open world My beloved https://github.com/zahnatom/dcsmods/tree/main Link to comment Share on other sites More sharing options...
HoneyFox Posted August 1, 2023 Share Posted August 1, 2023 (edited) On 6/30/2023 at 3:30 AM, hotrod525 said: Yeah i went into the .lua file and i just removed some "restriction" you can do it on your own, you need NOTEPAD+. The F15E .lua is located in the coremods/f15e in you're DCS install. Dont forget to make a backup file and if you have absolutely no clue what your are doing, take some time on google to learn a bit about it. So far, GBU31 work for sure, i havent test GBU38, GBU54 dosent show up on page, GBU15 dosent work, nor MAV / AGM130 / AGM 154. On the other end, AIM9X does work, GBU27 and GBU28 also work. So it's a sort a "try and error". I think those last 2 werent add into the release due to "old model". But i dont mind so much. PS : This is an early acces, modifying the .lua to access unfinished feature come with possibles issues. GBU-54 works fine, similar as GBU-38. One small issue is that, in my test runs the auto-lasing often fail to work for it, but you can still manually lase the target and it will track the laser spot normally. GBU-27/28 can be dropped, but they do not track laser spot right now... Edited August 1, 2023 by HoneyFox Link to comment Share on other sites More sharing options...
Zahnatom Posted August 1, 2023 Share Posted August 1, 2023 1 hour ago, nellisagrs said: Great, Thanks! I have not checked but is the HMCS in there too? no idea My beloved https://github.com/zahnatom/dcsmods/tree/main Link to comment Share on other sites More sharing options...
Recommended Posts