Jump to content

Recommended Posts

Posted

I downloaded the Hunter Mk6 and installed it like all the other VSN mods I use. Although the Hunter is marked as flyable in the ME, I can't fly it. At first I suspected that it had something to do with the FC3 botched by DCS. The workaround to jump into the F-15C module first and then back to the Hunter doesn't help for me. The VSN F-104 mod, which is also based on the F-15C, works perfectly with my installation. Has anyone had similar experiences and could help me?

Posted

Thanks! There's a workaround to make the mods work - just first spawn the FC3 0r 4 original module in a mission, and the close the mission, change the aircraft to the VSN module, and start the mission again

Posted (edited)
27 minutes ago, Fab8ball said:

Thanks! There's a workaround to make the mods work - just first spawn the FC3 0r 4 original module in a mission, and the close the mission, change the aircraft to the VSN module, and start the mission again

While that workaround does work many people have experienced problems with multiple things not working. The landing gear quite often stays down and you can't operate it via joystick keybindings or keyboard shortcuts so your stuck with it down. The flaps often don't work and are stuck in the fully down position and some people have issues with the trigger and/or launch weapon not working.

For me personally I have had the landing gear and flaps problem on every aircraft using the workaround. Occasionally the flaps will retract but not often and as for the trigger 75% of the time that doesn't work or sometimes the trigger works and the launch weapon doesn't. Many people have reported the issue with the workaround as it makes the aircraft unflyable at times so ED have been asked for a proper fix. 

Edited by TKhaos
  • Like 1
Posted
vor einer Stunde schrieb Fab8ball:

Thanks! There's a workaround to make the mods work - just first spawn the FC3 0r 4 original module in a mission, and the close the mission, change the aircraft to the VSN module, and start the mission again

Thanks for your advice. While this workaround works for the VSN module F-104, it doesn't work for the Hunter.

Posted
7 hours ago, TKhaos said:

While that workaround does work many people have experienced problems with multiple things not working. The landing gear quite often stays down and you can't operate it via joystick keybindings or keyboard shortcuts so your stuck with it down. The flaps often don't work and are stuck in the fully down position and some people have issues with the trigger and/or launch weapon not working.

For me personally I have had the landing gear and flaps problem on every aircraft using the workaround. Occasionally the flaps will retract but not often and as for the trigger 75% of the time that doesn't work or sometimes the trigger works and the launch weapon doesn't. Many people have reported the issue with the workaround as it makes the aircraft unflyable at times so ED have been asked for a proper fix. 

 

indeed same issue here, but seems is limited only to planes in SFM. All EFM modules seems working fine instead

  • Like 1
Posted

I installed the 2 Seat Hunter, ran the su25 first, changed to Hunter, but no model or cockpit, just the map showing where it's heading off to. 

Hopefully this will get sorted in time. but thanks for the heads up on the Hunter

Posted
17 minutes ago, flyingscotsman said:

I installed the 2 Seat Hunter, ran the su25 first, changed to Hunter, but no model or cockpit, just the map showing where it's heading off to. 

Hopefully this will get sorted in time. but thanks for the heads up on the Hunter

run the A-10A first not the Su25. It should work then. But no gear and flaps control unfortunately

 

Posted
5 hours ago, cdpkobra said:

I made a hot-patch for "impatient customers"

 

Hi, thanks a lot for the help 🙂 

 

jbtPzz5.jpg

 

sTSOtuC.jpg

 

Best regards,

 

Eduardo

  • Like 2

 

For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra

For Gaming: 34" Monitor - Ryzen 3600 - 32 GB DDR4 2400 - nVidia RTX2080 - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar

Mobile: iPad Pro 12.9" of 256 GB

Posted (edited)
7 hours ago, Fab8ball said:

run the A-10A first not the Su25. It should work then. But no gear and flaps control unfortunately

 

OK Thanks for that, will try that out. 2hrs later, YEP that worked for me, have a Billy Bunter 2 seater, needs a LOT of adjustment, but it looks great. THANK YOU

Edited by flyingscotsman
Posted (edited)

Hi gents.

Had the same issue - appearing but not flyable on one system with the new 2.9xxxxx patch installed - tried theHunter mod (both Mk6 and TR6) on another system still on previous 2.8xxx - both worked ! 

Nice looking model -, and even has unique cockpits for both models.

Awesome work again VSN gang !!!

**should also mention that on the syst that Hunter did not work also have FC2024 installed.**

Edited by xxautopsy
Posted
Quote

FOr the record,

the issues w/ Mods that HotLink FC3 Avionics and Pits has nothing to do with FC2024 itself,

FC3 has been depreciated entirely, the Module ID is no longer active, so any mod that relied on "\Flaming Cliffs\..." Paths for cockpit art or systems etc, will no longer work. 
Also note, during the transition there was wonky Auth access for everyone, so FC3 is no longer part of the builds, users need to install the individual FCS Modules for A-10A, F-15C, MIG-29 SU25A, SU27, SU33 and have them Auth,

Then the mods need to be revised to use the FCS Modules paths for Cockpit art and systems (ie Instead of "\Flaming Cliffs\... it should be \<F-15C><SU-27><SU-33>\ etc etc

This was on the F-22A Raptor post explaining the issues with the cockpits, the post was by SkateZilla from the ED Beta Testers.

Posted

Slightly off topic for DCS but a short video, just over 4 minutes of a incident that took place in the UK in 1968 with a Hawker Hunter. Just thought it might be of interest.

 

  • Like 1
  • Thanks 1
Posted

Large livery package. J-727 and J-733 of the Fuerza Aérea de Chile are new. All others are adapted from the FS2004 model from Virtavia.

https://www.dropbox.com/scl/fi/mocfpt1hx5faxy7cuwmow/VSN_Mk6.rar?rlkey=vhzsrpx8rc8inheg9886v5vj8&st=1rhk0urd&dl=0

  • Thanks 6

Windows 11 Enterprise 64-bit processor AMD Ryzen Threadripper 3970X 32-core processor 3.90 GHz, installed memory 256 GB (256 GB usable), system type 64-bit operating system, x64-based processor
2 x NVIDIA RTX TITAN SLI 48 GB vRAM, 3x 2 TB M2 NVMe WDS200T3XHC Raid, 2x 4 TB M2 NVMe Force MP510 Raid, ERM - 3K3U water cooling, gaming motherboard ROG ZENITH II EXTREME ALPHA
Monitor 108 cm ACER PREDATOR CG437K 7680x4320-120Hz, power supply 2000 watts

Posted (edited)

Just a heads up, just tried the hot fix that 'cdpkobra' posted but for me I have none functioning landing gear, no flaps and no trigger but weapons launching does work for missiles in the Hawker Hunters.

I will say though that previous to the hot fix neither the MK6 or TMK68 worked at all so at least now they are showing up and can be flown.

Edited by TKhaos
Posted
6 hours ago, Urbi said:

Large livery package

 

Thank you so much to you and all other livery creators, for all these Hunter extra liveries:

 

3BODCNL.jpg

 

I edited their descriptions  a bit, since I like to have liveries filtered by countries, to avoid having to wade through 47 liveries whenever I place a Hunter on a mission, and also to remember who was the user that shared it  🙂  ... like this:

 

DYl1Crt.jpg

 

Thanks again 🙏

  • Like 2

 

For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra

For Gaming: 34" Monitor - Ryzen 3600 - 32 GB DDR4 2400 - nVidia RTX2080 - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar

Mobile: iPad Pro 12.9" of 256 GB

  • 2 weeks later...
Posted

buongiorno, ho la versione 2.5.6.... per computer portatile di anni fa, non aggiorno Dcs perchè il programma gira meglio così rispetto alle ultime versioni.

Ho scaricato alcune mod per la versione 2.9...., certe funzionano bene, tipo vsn f4, f9, f106, però G91, f100, e recentemente l'Hunter scaricati come al solito non si "vedono" nel gioco, nel caso del g91 si vede solo una sagoma grigia, e mi chiedevo se fosse possibile adattare le mod alla mia vecchia versione in modo che funzionino correttamente,

Grazie in anticipo a chi potesse aiutarmi!

 

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...