Yurgon Posted August 23 Posted August 23 1 hour ago, Byzantine_SK said: I can see the campaign from the “my campaigns” tab within the user interface but clicking “ok” does not prompt the campaign itself to start. Mission 1 plays in the Marianas Terrain - do you have that installed? It's free, so if you don't have it yet, just install it and give it another try. 2
YoYo Posted August 24 Author Posted August 24 10 hours ago, Yurgon said: Mission 1 plays in the Marianas Terrain - do you have that installed? It's free, so if you don't have it yet, just install it and give it another try. Yes, that could be it too. Someone else had a similar problem once. I've just corrected the description in the User files. 3 Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Brainfreeze Posted September 4 Posted September 4 (edited) Hi guys, got an issue in Mission 3 ... After spotting the two SUVs with the 3 soldiers next to it and reporting their position the 3 soldiers head towards the cars... one makes it in but the two others just get stuck next to the other car ... The mission cannot proceed from here. Retried 3 times already and it takes a while to get there so frustrated and seeking help... can just try the same again and again and expect a different result I have followed the waypoints dutifully, I spot from wpt4 1000ft AGL.... Lost here Edited September 4 by Brainfreeze i9 14900K / 64GB / RTX 4090 / Varjo Aero / Winwing Orion2 + F15EX / Virpil Wrbrd + Alpha Stick + ACE pedals
YoYo Posted September 4 Author Posted September 4 34 minutes ago, Brainfreeze said: Hi guys, got an issue in Mission 3 ... After spotting the two SUVs with the 3 soldiers next to it and reporting their position the 3 soldiers head towards the cars... one makes it in but the two others just get stuck next to the other car ... The mission cannot proceed from here. Retried 3 times already and it takes a while to get there so frustrated and seeking help... can just try the same again and again and expect a different result I have followed the waypoints dutifully, I spot from wpt4 1000ft AGL.... Lost here Two vehicles should be moving together, and you should be following them at a certain distance. Isn't that what's happening? Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Brainfreeze Posted September 4 Posted September 4 (edited) 1 hour ago, YoYo said: Two vehicles should be moving together, and you should be following them at a certain distance. Isn't that what's happening? No. Two of the 3 soldiers move to the vehicle on the Eastern side but do not get in and the vehicles never move. I have already experienced this in someone's else custom mission with soldiers failing to embark on a helicopter and the helicopter leaving without them... Dumb AI Edited September 4 by Brainfreeze i9 14900K / 64GB / RTX 4090 / Varjo Aero / Winwing Orion2 + F15EX / Virpil Wrbrd + Alpha Stick + ACE pedals
YoYo Posted September 4 Author Posted September 4 (edited) 30 minutes ago, Brainfreeze said: No. Two of the 3 soldiers move to the vehicle on the Eastern side but do not get in and the vehicles never move. I have already experienced this in someone's else custom mission with soldiers failing to embark on a helicopter and the helicopter leaving without them... Dumb AI Something might have happened after the last patch. I'll have to check it out because this option 100% worked here. Also, it's worth disabling any other mods. Sometimes they can break things when it comes to the AI too. Try again, and if there's a problem, just "skip" the mission. Edited September 4 by YoYo Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Brainfreeze Posted September 6 Posted September 6 Help with Wingman needed... Mission 4... struggling to give Ethan order to attack the convoy... seems to not hear me... not sure what i am doing wrong... do I need to select radio 1 fisrt? in the F10 - flight -Engage menu ... which one is the right option? My target / Mission then rejoin / Ground tgts? Thks for any pointers i9 14900K / 64GB / RTX 4090 / Varjo Aero / Winwing Orion2 + F15EX / Virpil Wrbrd + Alpha Stick + ACE pedals
Vital061270 Posted September 6 Posted September 6 According to the editor, the radio frequency in the link is 116,500. Try to change the frequency in flight. 1 ZAR_Magadan
Brainfreeze Posted September 6 Posted September 6 16 minutes ago, Vital061270 said: According to the editor, the radio frequency in the link is 116,500. Try to change the frequency in flight. Yep indeed. Stupid me… change it to channel 1 and it will work… 1 1 i9 14900K / 64GB / RTX 4090 / Varjo Aero / Winwing Orion2 + F15EX / Virpil Wrbrd + Alpha Stick + ACE pedals
YoYo Posted September 6 Author Posted September 6 12 minutes ago, Brainfreeze said: Yep indeed. Stupid me… change it to channel 1 and it will work… Freq or channels you have in the kneeboard too. You can check it during the flight. 1 1 Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
PapaFlo Posted September 8 Posted September 8 On 9/4/2025 at 10:54 AM, Brainfreeze said: No. Two of the 3 soldiers move to the vehicle on the Eastern side but do not get in and the vehicles never move. I have already experienced this in someone's else custom mission with soldiers failing to embark on a helicopter and the helicopter leaving without them... Dumb AI Same problem here . No mods, still vehicles never move. The first 2 missions were really great, looking forward to fly the rest of the campaign. Cheers, Flo 1
YoYo Posted September 8 Author Posted September 8 (edited) 5 hours ago, PapaFlo said: Same problem here . No mods, still vehicles never move. The first 2 missions were really great, looking forward to fly the rest of the campaign. Cheers, Flo Since you're the second person, I'll check it out this week. Maybe there really is some kind of "embarking" bug right now. I'll have to check. The vehicles should move and the stopped people should disappear. Of course, their correct position must be reported by F10 radio beforehand, as per the mission's progress. Otherwise, they won't move, but I assume that was done correctly, right? It's also good to include a track if its possible (for bigger file use this: https://www.sendspace.com/). Edited September 8 by YoYo Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
PapaFlo Posted September 8 Posted September 8 (edited) Hi YoYo, I have managed to get the mission to work by a small change in the mission editor (hidden in spoiler tab): Spoiler I slightly enlarged the trigger zone for "taliban 0 1 disappears" in front of the car, as after running to wp3 one of the soldiers (i think "0") was standing in front of the vehicle and so outside of the original trigger zone: Now the cars started moving and I enjoyed a really great mission. Had to fly it twice, as the second part is really on the hard side, but great fun! null Mission 3 is really great fun. Would be a shame to skip. Thank you for your amazing work and now back to mission 4 of this awesome campaign. Cheers, Flo Edited September 8 by PapaFlo 1
YoYo Posted September 9 Author Posted September 9 (edited) On 9/8/2025 at 10:47 PM, PapaFlo said: Hi YoYo, I have managed to get the mission to work by a small change in the mission editor (hidden in spoiler tab): Thanks , I'll check how it works and if it's ok, I'll enlarge this area in the update. Btw. corrected, new version 1.1 is on the server. Edited September 12 by YoYo 1 2 Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
moggel Posted October 14 Posted October 14 Love this campaign but I can't seem to complete mission 3. Please see problem description in spoiler: Spoiler After the US vehicles start moving after the ambush, nothing else seems to happen. The three taliban units are eliminated and the incoming three vehicles are left burning but I just keep following the US units until fuel gets below a 100lbs. James doesn't say anything and there's no more communication on the radio. What am I missing? i7-3930K CPU @ 3.20GHz; 16Gb DDR3; GeForce GTX 1070; Windows 10; TM Warthog HOTAS
YoYo Posted October 14 Author Posted October 14 (edited) 1 hour ago, moggel said: Love this campaign but I can't seem to complete mission 3. Please see problem description in spoiler: Hide contents After the US vehicles start moving after the ambush, nothing else seems to happen. The three taliban units are eliminated and the incoming three vehicles are left burning but I just keep following the US units until fuel gets below a 100lbs. James doesn't say anything and there's no more communication on the radio. What am I missing? Spoiler In this case, you no longer need to follow the group. You should receive a message that the threat has been eliminated and you can proceed with RTB. Wasn't that the case? Btw. Also remember that a symptom of a dead vehicle is flames and smoke. It's possible that the unit wasn't destroyed, but merely damaged (thin smoke without flames). It is possible that not all vehicles were destroyed if there was no announcement. Edited October 14 by YoYo 1 Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
YoYo Posted November 13 Author Posted November 13 A little off-topic. There will be some books signed by the author of "Scouts Out!" :): 2 Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
audax Posted yesterday at 10:47 AM Posted yesterday at 10:47 AM I really enjoy this campaign so far, but now I am stuck. In Mission 4, my wingman doesn't take off. The most I managed is that he taxied for around 100m and then stopped. The log says that he landed again after a short while. If I try to fly the mission anyway, it fails at WP2 with the wingman's crew dead. No track because it's very easy to reproduce. I take off and the wingman doesn't follow. I switched to channel 1 and I hear all the scripted communication and the ATC comms. If you can't easily reproduce this, I can upload a track. Thanks for the nice campaign!
Radsr30 Posted 23 hours ago Posted 23 hours ago 4 hours ago, audax said: I really enjoy this campaign so far, but now I am stuck. In Mission 4, my wingman doesn't take off. The most I managed is that he taxied for around 100m and then stopped. The log says that he landed again after a short while. If I try to fly the mission anyway, it fails at WP2 with the wingman's crew dead. No track because it's very easy to reproduce. I take off and the wingman doesn't follow. I switched to channel 1 and I hear all the scripted communication and the ATC comms. If you can't easily reproduce this, I can upload a track. Thanks for the nice campaign! I just went through this yesterday. I set radio 3 to the 116.500 and everything worked. Hope this helps. Rad 2 I9-10900K CPU at 5.0 GHz, 32GB 3600 RAM, Nvidia 2080 Super 1 TB WD NVMe SSD, 2 TB WD NVMe SSD, Reverb G2, TM Warthog
MicroShket Posted 21 hours ago Posted 21 hours ago Missed some trigger in Mission 2, I presume. UH-60 started to cycle between two points in mid-route. It seems this campaign is no go for me. Спойлер ASRock X570, Ryzen 9 3900X, Kingston HyperX 64GB 3200 MHz, XFX RX6900XT MERC 319 16GB, SSD for DCS - Patriot P210 2048GB, HP Reverb G2. WINWING Orion 2 throttle, VPC Rotor Plus TCS + Hawk-60 grip, VPC WarBRD + MongoosT-50CM2/V.F.X (F-14) grips. WINWING Orion pedals.
YoYo Posted 18 hours ago Author Posted 18 hours ago 3 hours ago, MicroShket said: Missed some trigger in Mission 2, I presume. UH-60 started to cycle between two points in mid-route. It seems this campaign is no go for me. You need to get close enough to your instructor (UH-60 unit); they'll even tell you how close you should be :). Then, when you join, the instructor will guide you further. 1 Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
MicroShket Posted 18 hours ago Posted 18 hours ago 18 минут назад, YoYo сказал: get close enough to your instructor I followed him. Everything was OK, James asked about road, some convoy and then at some point trigger didn't work. UH-60 started to cyclic between two waypoints. At Bingo fuel I RTB'd and quit. I opened second mission in the mission editor to check trigger zones as someone told on the first or second page of this thread, but I have no experience with this at all. Спойлер ASRock X570, Ryzen 9 3900X, Kingston HyperX 64GB 3200 MHz, XFX RX6900XT MERC 319 16GB, SSD for DCS - Patriot P210 2048GB, HP Reverb G2. WINWING Orion 2 throttle, VPC Rotor Plus TCS + Hawk-60 grip, VPC WarBRD + MongoosT-50CM2/V.F.X (F-14) grips. WINWING Orion pedals.
YoYo Posted 16 hours ago Author Posted 16 hours ago 1 hour ago, MicroShket said: I followed him. Everything was OK, James asked about road, some convoy and then at some point trigger didn't work. UH-60 started to cyclic between two waypoints. At Bingo fuel I RTB'd and quit. I opened second mission in the mission editor to check trigger zones as someone told on the first or second page of this thread, but I have no experience with this at all. He didn't lead you to the range? The fact that he's orbiting means he's waiting for you to complete the mission at the range (with rockets). Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
MicroShket Posted 16 hours ago Posted 16 hours ago 1 минуту назад, YoYo сказал: He didn't lead you to the range? No commands on practicing were done (no dialog lines from triggers list showed up). I followed him from the beginning. Always stayed behind UH-60, never overshot, but frequently was at close, at 70-150m I think (lagging far behind is boring). I understand that it could be my mistake and I shouldn't be so close to UH-60, but that's not good for immersion. Спойлер ASRock X570, Ryzen 9 3900X, Kingston HyperX 64GB 3200 MHz, XFX RX6900XT MERC 319 16GB, SSD for DCS - Patriot P210 2048GB, HP Reverb G2. WINWING Orion 2 throttle, VPC Rotor Plus TCS + Hawk-60 grip, VPC WarBRD + MongoosT-50CM2/V.F.X (F-14) grips. WINWING Orion pedals.
YoYo Posted 7 hours ago Author Posted 7 hours ago 8 hours ago, MicroShket said: No commands on practicing were done (no dialog lines from triggers list showed up). I followed him from the beginning. Always stayed behind UH-60, never overshot, but frequently was at close, at 70-150m I think (lagging far behind is boring). I understand that it could be my mistake and I shouldn't be so close to UH-60, but that's not good for immersion. There is no need to be too close for safety reasons, besides, the instructor gives the distance. If you are flying further, it means it's ok. Have you tried this mission a second time? Is it like this every time? Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Recommended Posts