Deadman Posted December 12, 2010 Author Share Posted December 12, 2010 Wow that was quick !! Great to hear that you like the covers :thumbup: https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Yskonyn Posted December 12, 2010 Share Posted December 12, 2010 They are very cool man. Thank you for providing the service! The wife already asked why I do provide for the stick to be warm during these cold days, but I refuse to get into bed early to keep her warm as well... :pilotfly::joystick: ;) [sIGPIC][/sIGPIC] Asus Z390-E, 32GB Crucial Ballistix 2400Mhz, Intel i7 9700K 5.0Ghz, Asus GTX1080 8GB, SoundBlaster AE-5, G15, Streamdeck, DSD Flight, TM Warthog, VirPil BRD, MFG Crosswind CAM5, TrackIR 5, KW-908 Jetseat, Win 10 64-bit ”Pilots do not get paid for what they do daily, but they get paid for what they are capable of doing. However, if pilots would need to do daily what they are capable of doing, nobody would dare to fly anymore.” Link to comment Share on other sites More sharing options...
Deadman Posted December 12, 2010 Author Share Posted December 12, 2010 Same thing here in Montana. The wife made some bed heaters a small pillow sized bag filled with cheap rice and lines sewn in to it ever 5 cm to keep the rice spread across the bag . Microwave for 3 minutes and put it in the bed toasty warm :thumbup: https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
MTFDarkEagle Posted December 12, 2010 Share Posted December 12, 2010 wait... you guys don't have central heating in your belly? :) I have, quite handy in fact when my girlfriend say's she's cold :P Lukas - "TIN TIN" - 9th Shrek Air Strike Squadron TIN TIN's Cockpit thread Link to comment Share on other sites More sharing options...
Yskonyn Posted December 12, 2010 Share Posted December 12, 2010 wait... you guys don't have central heating in your belly? :) I have, quite handy in fact when my girlfriend say's she's cold :P I think we do, at least I do for sure, but the fact of the matter is that its no use because I spend far too much time with thr WH. So the wife needs to find alternative ways to warm up. Hence the inquiry from her about the covers. :) [sIGPIC][/sIGPIC] Asus Z390-E, 32GB Crucial Ballistix 2400Mhz, Intel i7 9700K 5.0Ghz, Asus GTX1080 8GB, SoundBlaster AE-5, G15, Streamdeck, DSD Flight, TM Warthog, VirPil BRD, MFG Crosswind CAM5, TrackIR 5, KW-908 Jetseat, Win 10 64-bit ”Pilots do not get paid for what they do daily, but they get paid for what they are capable of doing. However, if pilots would need to do daily what they are capable of doing, nobody would dare to fly anymore.” Link to comment Share on other sites More sharing options...
Deadman Posted December 13, 2010 Author Share Posted December 13, 2010 HI Guys Shipment for Monday will be delayed until Tuesday I need to take a road trip with the wife or die.:thumbup: 1 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
OhmWrecker Posted December 13, 2010 Share Posted December 13, 2010 Quick question for you deadman. Have you tested the quality of the fleece at all with some prolonged friction to see how the fibers wear over time? Any shedding issues? Fleece can be a little hit or miss at times. Some fleece is really well put together with tight and durable material, but others like a bathrobe I received as a gift shed fibers like crazy to the point that I couldn't even sit on furniture without leaving fibers behind. Also, any sort of quality assurance with stuff like stitches that come loose? Link to comment Share on other sites More sharing options...
Yskonyn Posted December 13, 2010 Share Posted December 13, 2010 What are you planning? Theyre just covers, man. ;) 1 [sIGPIC][/sIGPIC] Asus Z390-E, 32GB Crucial Ballistix 2400Mhz, Intel i7 9700K 5.0Ghz, Asus GTX1080 8GB, SoundBlaster AE-5, G15, Streamdeck, DSD Flight, TM Warthog, VirPil BRD, MFG Crosswind CAM5, TrackIR 5, KW-908 Jetseat, Win 10 64-bit ”Pilots do not get paid for what they do daily, but they get paid for what they are capable of doing. However, if pilots would need to do daily what they are capable of doing, nobody would dare to fly anymore.” Link to comment Share on other sites More sharing options...
y2kiah Posted December 13, 2010 Share Posted December 13, 2010 Great job man, ordering mine today! Link to comment Share on other sites More sharing options...
Deadman Posted December 13, 2010 Author Share Posted December 13, 2010 No prolonged test were done on the covers . I have not noticed any sheding it is an anti pile fleece. The coard to hold on the flags is milspec red parachute cord and the flages are nylon with the Remove befor flight silk screeneed on them. Witch were the best choice for me more flexible and lighter than the embroidered ones.As for quality assurance just waite 6 months and ask some one that has the covers if there good or not:smilewink: I am not sure what else i can tell you about these cover so far no complaints. Thanks for your orders guys now off for a two and a half hour drive for supplies and Christmas shopping Quick question for you deadman. Have you tested the quality of the fleece at all with some prolonged friction to see how the fibers wear over time? Any shedding issues? Fleece can be a little hit or miss at times. Some fleece is really well put together with tight and durable material, but others like a bathrobe I received as a gift shed fibers like crazy to the point that I couldn't even sit on furniture without leaving fibers behind. Also, any sort of quality assurance with stuff like stitches that come loose? https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
OhmWrecker Posted December 13, 2010 Share Posted December 13, 2010 What are you planning? Theyre just covers, man. ;) Haha, well trust me if you saw the amount of material that fleece robe lost you'd ask too. It was worse than having a dust problem, and I'm sure if his material shed fibers anywhere near that it'd no doubt work it's way into the ball of the stick and throttle as well. No prolonged test were done on the covers . I have not noticed any sheding it is an anti pile fleece. The coard to hold on the flags is milspec red parachute cord and the flages are nylon with the Remove befor flight silk screeneed on them. Witch were the best choice for me more flexible and lighter than the embroidered ones.As for quality assurance just waite 6 months and ask some one that has the covers if there good or not:smilewink: I am not sure what else i can tell you about these cover so far no complaints. Thanks for your orders guys now off for a two and a half hour drive for supplies and Christmas shopping Thanks for the response Deadman, I haven't seen any reviews yet on the forums here so I thought I'd ask you direct. Link to comment Share on other sites More sharing options...
Yskonyn Posted December 13, 2010 Share Posted December 13, 2010 I was just pulling your leg there, OhmWrecker. ;) It is a valid question I suppose. [sIGPIC][/sIGPIC] Asus Z390-E, 32GB Crucial Ballistix 2400Mhz, Intel i7 9700K 5.0Ghz, Asus GTX1080 8GB, SoundBlaster AE-5, G15, Streamdeck, DSD Flight, TM Warthog, VirPil BRD, MFG Crosswind CAM5, TrackIR 5, KW-908 Jetseat, Win 10 64-bit ”Pilots do not get paid for what they do daily, but they get paid for what they are capable of doing. However, if pilots would need to do daily what they are capable of doing, nobody would dare to fly anymore.” Link to comment Share on other sites More sharing options...
Vegas Posted December 13, 2010 Share Posted December 13, 2010 AWESOME!! Dug mine out of the mailbox yesterday. They seem to fit very well and provide excellent coverage to keep dust and dog hair out of the innards of the WH. The remove before flight ribbons are a nice touch. My wife even thought they were cool. Link to comment Share on other sites More sharing options...
Deadman Posted December 14, 2010 Author Share Posted December 14, 2010 Vegas Its great to hear you received your cover and you so happy with them:thumbup: Now back to work for me https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
LawnDart Posted December 14, 2010 Share Posted December 14, 2010 Hey Deadman, you should put your e-store (website) in your forum signatures! Just an idea. [sigpic]http://www.virtualthunderbirds.com/Signatures/sig_LD.jpg[/sigpic] Virtual Thunderbirds, LLC | Sponsored by Thrustmaster Corsair 750D Case | Corsair RM850i PSU | ASUS ROG MAXIMUS X CODE | 32GB Corsair DDR4 3200 | Intel i7-8086K | Corsair Hydro H100i v2 Cooler | EVGA GTX 1080 Ti FTW | Oculus Rift | X-Fi Titanium Fatal1ty | Samsung SSD 970 EVO 1TB NVMe | Samsung SSD 850 EVO 1TB | WD Caviar Black 2 x 1TB | TM HOTAS Warthog | TM Pendular Rudder | TM MFD Cougar Pack | 40" LG 1080p LED | Win10 | Link to comment Share on other sites More sharing options...
Deadman Posted December 14, 2010 Author Share Posted December 14, 2010 Hum I added the link to the suite in the signature block lets see if it works https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
LawnDart Posted December 14, 2010 Share Posted December 14, 2010 Works here. Just figured it would be easier for someone wanting to order to find your site this way instead of digging for it. [sigpic]http://www.virtualthunderbirds.com/Signatures/sig_LD.jpg[/sigpic] Virtual Thunderbirds, LLC | Sponsored by Thrustmaster Corsair 750D Case | Corsair RM850i PSU | ASUS ROG MAXIMUS X CODE | 32GB Corsair DDR4 3200 | Intel i7-8086K | Corsair Hydro H100i v2 Cooler | EVGA GTX 1080 Ti FTW | Oculus Rift | X-Fi Titanium Fatal1ty | Samsung SSD 970 EVO 1TB NVMe | Samsung SSD 850 EVO 1TB | WD Caviar Black 2 x 1TB | TM HOTAS Warthog | TM Pendular Rudder | TM MFD Cougar Pack | 40" LG 1080p LED | Win10 | Link to comment Share on other sites More sharing options...
CrashEd Posted December 14, 2010 Share Posted December 14, 2010 Anyone in the UK got theirs yet? I suspect they have been held up in customs due to the bad weather backlog/usual xmas mayhem... Link to comment Share on other sites More sharing options...
Deadman Posted December 15, 2010 Author Share Posted December 15, 2010 (edited) Florian invoice #0000001160 your covers shipped today i emailed you from three accounts and you address is not working for me i hope you see this. # below 1162 have shipped Edited December 15, 2010 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Cowboy10uk Posted December 15, 2010 Share Posted December 15, 2010 Thanks Deadman, Got the email that mine have shipped, Fingers crossed they wont get help up for too long crossing the pond. [sIGPIC][/sIGPIC] Fighter pilots make movies, Attack pilots make history, Helicopter pilots make heros. :pilotfly: Corsair 570x Crystal Case, Intel 8700K O/clocked to 4.8ghz, 32GB Vengeance RGB Pro DDR4 3200 MHZ Ram, 2 x 1TB M2 drives, 2 x 4TB Hard Drives, Nvidia EVGA GTX 1080ti FTW, Maximus x Hero MB, H150i Cooler, 6 x Corsair LL120 RGB Fans And a bloody awful Pilot :doh: Link to comment Share on other sites More sharing options...
Cowboy10uk Posted December 15, 2010 Share Posted December 15, 2010 Thanks Deadman, Got the email that mine have shipped, Fingers crossed they wont get help up for too long crossing the pond. [sIGPIC][/sIGPIC] Fighter pilots make movies, Attack pilots make history, Helicopter pilots make heros. :pilotfly: Corsair 570x Crystal Case, Intel 8700K O/clocked to 4.8ghz, 32GB Vengeance RGB Pro DDR4 3200 MHZ Ram, 2 x 1TB M2 drives, 2 x 4TB Hard Drives, Nvidia EVGA GTX 1080ti FTW, Maximus x Hero MB, H150i Cooler, 6 x Corsair LL120 RGB Fans And a bloody awful Pilot :doh: Link to comment Share on other sites More sharing options...
ACUTech Posted December 15, 2010 Share Posted December 15, 2010 Status of my shipment says "Accceptance" since december 7th... Can't wait, my TM WH & MFD Cougars should be here today or 2mo ;) =ACU=Tech TECH Systemes Computer 1 Computer 2 [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
kylania Posted December 16, 2010 Share Posted December 16, 2010 Payday!!! Order incoming! :) [sIGPIC][/sIGPIC] Christmas Cheer - A Landing Practice Mission : Beta Paint Schemes : HOTAS Keyboard Map : Bingo Fuel - A DCS A-10C Movie Link to comment Share on other sites More sharing options...
159th_Viper Posted December 16, 2010 Share Posted December 16, 2010 Arrived in Good Order this fine Thursday afternoon in Scotland. Thanx again Deadman - Looks Good :thumbup: Novice or Veteran looking for an alternative MP career? Click me to commence your Journey of Pillage and Plunder! [sIGPIC][/sIGPIC] '....And when I get to Heaven, to St Peter I will tell.... One more Soldier reporting Sir, I've served my time in Hell......' Link to comment Share on other sites More sharing options...
Deadman Posted December 16, 2010 Author Share Posted December 16, 2010 Viper its great you got it be for Xmass :thumbup: I hope you enjoy them all the best DM 1 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Recommended Posts