All Activity

Can DCS please upgrade the (F10) MAPS and knee board maps to include the grid numbers or letters to help navigate in game. I fly the WWII MAPs. In game you get a message on enemy activity as heading (W) , Bearing (S), altitude (Low) which has no valuable info as a pilot there is no grid to reference the location of enemy aircraft if we had a grid number and letters on the sides of our map we could triangulate our target. Maps have grids that you can triangulate a course without knowing a town name it makes the game more immersive. Can we please address this in the next updates. Remember WWII did not have radar scopes or GPS in their aircraft it was all maps and land mark recognition.

1) Why no head lights or brake lights on vehicles? (Its a simulation) at night people drive with their lights on. Not every vehicle has night vision and tanks do have headlights. (easy fix) 2) Why aren't there more realistic tank explosions? for example Russian tank turrets popping there tops or catastrophic explosions when their ammo cooks off. Or vehicles that don't explode or burn but are disabled. Not everything has to explode. Tanks loosing their tracks and are immobile but can still fire their weapons. These should be also be easy. 3) Realistic ship sinking times. It can take hours for a ship to sink depending how fast water is flowing into the hull. (The Russian cruiser Moskva was struck by Ukrainian missiles on the evening of April 13, 2022, and sank in the early morning of April 14, 2022, approximately six to ten hours later. The cruiser, hit by two Neptune anti-ship missiles, experienced a fire and ammunition explosions, leading to its capsizing and eventual sinking while being towed.) 4) Why when a column of vehicles falls under attack the ENTIRE group instantly make 90 degree turns and then park themselves out in the open so they are easy prey. (Something more realistic would be... if I'm driving at the front of a column, and the back of the column is attacked, I might not be aware. So I would just keep driving as nothing had happened. If I became aware I would speed up, making evasive maneuvers, seek cover behind builds or under trees. Why wouldn't people be jumping out of the vehicle, running for cover and opening up with small arms fire at incoming aircraft?) Sorry, but in DCS World, the AI sucks. These are some things that are completely stupid and should have already been resolved.

Новое видео по МиГу от тов. Matt "Wags" Wagner

А вот тут поподробней. Не смешно.

ED Team ?

ive got i7 12700kf 64GB ram RTX4070 12GBvram VR Quest 2 At 72hz Msi z690A i cant play vr without the ghosting efect because i can not holdd72 fps Why??? text map is on high, i fly the apache i ve set off core parking in windows ,ohter games are running very fine with no cores are parked , when i play dcs cores are parked, used Process lasso , still can no t hold 72 fps without dlss What the hell is wrong with dcs I think 72fps should hold . i mean in the counter the yellow and the green line are heavely drawing ( like a kid that draws a drawing) Or is just not possible with a rtx4070 to get 72hz in a quest with quest link???

The radar range has been semi recently tweaked in the FC3 module to be very accurate. Expect it to be close.

Welcome to DCS, avoid smoking a Cigar while using Track-IR It's like Flares to fool the Tracker

Well, kind of complicated if having your Hotas and maybe other USB gadgets ( UFC, MFD etc.. ) on one PC and the actual DCS core running on another is what you want. It is first off not ment to be/work/function by design of the involved software and second, even if, it wouldn't make it any simpler or less work even if you knew how. The only thing that may get close to what you may want, lots of guesswork here, is a Client-Server Home setup. That frees up your actual flying rig and puts some load to the server, your old rig. The bigger the mission the bigger the gain as rule of thumb. I would do this anyway, if you have 2 PC's at your hand, it's not uncommon at all. With 10 and 11, you can basically take the drive, or clone it, and PLUG IT IN THE NEW MAINBOARD. It will work and if your Windows was in good shape that is what I would do to avoid reinstalling all the stuff and licenses and configs and settings, weeks, not days of work, at least in my case. The only thing you should do if you take the existing OS install along is uninstall al MB specific software, Audio, BT, WLAN etc. if there are any listed in Apps before you unplug it and before plugging into the new MB. That's all there is. There is no more HAL like XP had that did not allow you to do this. It is on par with Linux, take the drive, plug it in and boot it. Safes alot of installing in many cases. Win will reboot once or twice to sort itself with new Hardware found on first launch, that's normal. If it, against all odds, should go wrong, make a backup of your data FIRST, make two !

The lights above Engine Test Regulator buttons won't light if I press them. I don't know if this is a bug or if this test is not modelled. Thanks a lot.

The files that you install or uninstall are located in DCS <root folder>\Mods\Aircraft. If the module's folder that you just uninstalled, are still there with any content, you can fully delete them without harm to your installation. IIRC, when you command for a module uninstall, those files at DCS <root folder>\Mods\Aircraft are deleted. Do not confuse with necessary files for displaying a unit properly inside "Core Mods" folder. Everyone need those file to be able to fight against and fight alongside with the unit in the simulator environment. Note: <root folder> - Wrote it because that file name is customizable and it goes by default as DCS World, but I'm not fully sure because it is been a long time since I've installed DCS from scratch.

Nice. Glad to have helped.

на пику вышел новый родной стриммер ПикоКоннект 10.6.6,где пофиксили лаги в OpenXR,который там работает без стимВР. https://github.com/owomushi/Pico-Connect/releases теперь не только VD нормально р аботает с игрой

ага,понял.Так и подумал тогда.

Thanks guys for taking the time to write. I know it is only a few GB of data but even a few KB is too much if I don't need it. I am asking how to fully uninstall a module properly that wont break my DCS.

АААА!!! "The Forest" используют маньяки-расчленители для своих тренировок

This is the F/A-18C bugs forum. F-16 bug reporting forum is over here https://forum.dcs.world/forum/333-bugs-and-problems/

Sniper doesn't have "issues"; it's Lightening that has the problem now, as it should be downgraded, but that's a completely different topic and not for this thread. I completed the entire campaign (except for mission 13) with the Sniper. It's obviously more difficult then, and better guidance with more data would probably be useful at times, but as you can see, it's possible to complete 12 missions with the AAQ-33 . Fortunately, we can rearm ourselves if someone wants to use more difficult optics ;). Cheers!

First of all, not very proficient in the harrier but i did fire mavs before and now like couple of days later i can't.. 1. master arms ON 2. Pick Mavs from STORE 3. double aft sensor select to get DMT running in TV ok.. 4. find target, designate so DMT stays on target 5. sensor select FWD to select irvm mode for mavs 6. lock the target as i aproach ever so closer 7. nothing happens i can't fire the missiles.. cant fire mavs.trk

I noticed that despite the fact that the wind is in the runway direction, if 25L/07R has the same ILS frequency, there is an interference, so I set up the "modern frequency for the 07R so it's fully usable. here is my beacons part of Frankfurt --LOC 07L { display_name = _('Frankfurt'); beaconId = 'airfield163_20'; type = BEACON_TYPE_ILS_LOCALIZER; callsign = 'RHM'; frequency = 110100000.000000; position = { -443583.906250, 100.000100, -851177.812500 }; direction = -100.841391; positionGeo = { latitude = 50.047996, longitude = 8.598907 }; sceneObjects = {'t:73852303'}; chartOffsetX = 4593.000000; }; --GS 25R { display_name = _('Frankfurt'); beaconId = 'airfield163_27'; type = BEACON_TYPE_ILS_GLIDESLOPE; callsign = 'DLF'; frequency = 109500000.000000; position = { -443643.500000, 100.000100, -851917.625000 }; direction = 78.659744; positionGeo = { latitude = 50.046376, longitude = 8.588953 }; sceneObjects = {'t:214099125'}; }; { display_name = _('Frankfurt'); beaconId = 'airfield163_2'; type = BEACON_TYPE_AIRPORT_HOMER; callsign = 'FR'; frequency = 297000.000000; position = { -442648.875000, 128.143317, -844779.937500 }; direction = -101.576053; positionGeo = { latitude = 50.065653, longitude = 8.684068 }; sceneObjects = {'t:73862380'}; }; --GS 25L { display_name = _('Frankfurt'); beaconId = 'airfield163_30'; type = BEACON_TYPE_ILS_GLIDESLOPE; callsign = 'FFM'; frequency = 110700000.000000; position = { -444321.468750, 100.000100, -852673.437500 }; direction = 81.530965; positionGeo = { latitude = 50.039301, longitude = 8.580205 }; sceneObjects = {'t:214090990'}; }; --LOC 07R { display_name = _('Frankfurt'); beaconId = 'airfield163_24'; type = BEACON_TYPE_ILS_LOCALIZER; callsign = 'IFSE'; frequency = 110950000.000000; position = { -444262.406250, 100.000100, -851914.812500 }; direction = -100.825012; positionGeo = { latitude = 50.040944, longitude = 8.590415 }; sceneObjects = {'t:73852304'}; chartOffsetX = 4222.000000; }; { display_name = _('Frankfurt'); beaconId = 'airfield163_5'; type = BEACON_TYPE_AIRPORT_HOMER; callsign = 'FW'; frequency = 382000.000000; position = { -445875.125000, 90.751128, -863257.500000 }; direction = -118.128176; positionGeo = { latitude = 50.009882, longitude = 8.439541 }; sceneObjects = {'t:73828942'}; }; { display_name = _('Frankfurt'); beaconId = 'airfield163_6'; type = BEACON_TYPE_TACAN; callsign = 'FFM'; frequency = 114200000.000000; channel = 89; position = { -443403.843750, 118.535061, -848339.000000 }; direction = -12.414079; positionGeo = { latitude = 50.053775, longitude = 8.637223 }; sceneObjects = {'t:215810048'}; }; --GS 07L { display_name = _('Frankfurt'); beaconId = 'airfield163_21'; type = BEACON_TYPE_ILS_GLIDESLOPE; callsign = 'RHM'; frequency = 110100000.000000; position = { -444432.531250, 100.000100, -855199.875000 }; direction = -97.789724; positionGeo = { latitude = 50.034575, longitude = 8.546010 }; sceneObjects = {'t:212951504'}; }; --LOC 25R { display_name = _('Frankfurt'); beaconId = 'airfield163_28'; type = BEACON_TYPE_ILS_LOCALIZER; callsign = 'DLF'; frequency = 109500000.000000; position = { -444506.750000, 100.000100, -855987.625000 }; direction = 79.143587; positionGeo = { latitude = 50.032752, longitude = 8.535441 }; sceneObjects = {'t:73846094'}; chartOffsetX = 4591.000000; }; --LOC 25L { display_name = _('Frankfurt'); beaconId = 'airfield163_29'; type = BEACON_TYPE_ILS_LOCALIZER; callsign = 'FFM'; frequency = 110700000.000000; position = { -445112.812500, 100.000100, -856363.250000 }; direction = 79.197225; positionGeo = { latitude = 50.026870, longitude = 8.531721 }; sceneObjects = {'t:73835198'}; chartOffsetX = 4222.000000; }; --GS 07R { display_name = _('Frankfurt'); beaconId = 'airfield163_23'; type = BEACON_TYPE_ILS_GLIDESLOPE; callsign = 'IFSE'; frequency = 110950000.000000; position = { -445032.750000, 100.000100, -855591.500000 }; direction = -99.485803; positionGeo = { latitude = 50.028721, longitude = 8.542056 }; sceneObjects = {'t:212951505'}; }; { display_name = _('Frankfurt'); beaconId = 'airfield163_11'; type = BEACON_TYPE_AIRPORT_HOMER; callsign = 'FFM'; frequency = 320000.000000; position = { -443411.906250, 118.986508, -847382.500000 }; direction = -101.576053; positionGeo = { latitude = 50.055115, longitude = 8.650293 }; sceneObjects = {'t:73862381'}; };

We finally got an update for the Iraq map Great news, and the screenshots look awesome! Thanks @BIGNEWY

Hi There I am flying the F-16C module with the latest DCS 2.9.19.13478 version. My system is Intel i7 with RTX 4060. The Joystick is Saitek X45. The issue is that when the Autopilot is engaged, the ATT HOLD and ALT HOLD mode does not work. The lateral modes works OK. I have a track where I activate the ATT and ALT modes. The flight path marker appears to stabilize but it keeps drifting in pitch. It neither holds the ALT or the ATT. Please see the track and let me know if I am missing anything. Cheers! ALT_PIT_HLD_NotWorking.trk