gabuzomeu

Hi, small glitch: in Mission 3, the B channel is not set to Rucqueville freq. And the in game brioefing mentions Ste Croix as channel B Don't know for the following missions.

The post from Cjhizh allows to compensate over brightness of 2.2.0: many thanks! This looks like this (old image first , then new with tone mapper fix), all game parameters stay the same :

As far as I understand, the witch hat has to be put on the horizon to get the proper attitude for hovering, (which is then achieved with 82° nozzles) The other use is when transitioning to wing borne flight, (eg @ take off) you have to put the witch hat on the carets (which are at about 14°) and then start getting nozzles to 0°

As well. There is a number of missing textures listed in the dcs.log file (see below): the first one seems the one responsible for our problem. To patch (quick and dirty, no reflection on glass, but no pixel) extract the attached file in your DCS \DCS World 2 OpenAlpha\Bazar\TempTextures folder) 00381.423 ERROR_ONCE DX11BACKEND: texture 'mig21bis_glass_romet' not found. Asked from 'NGMODEL' 00382.451 ERROR_ONCE DX11BACKEND: texture 'mig21bis_tire_r_romet' not found. Asked from 'NGMODEL' 00382.569 ERROR_ONCE DX11BACKEND: texture 'mig21bis_tire_f_romet' not found. Asked from 'NGMODEL' 01003.366 ERROR_ONCE DX11BACKEND: texture 'mig21bis_wing_r_nmp' not found. Asked from 'NGMODEL' 01003.371 ERROR_ONCE DX11BACKEND: texture 'mig21bis_wing_r_spec' not found. Asked from 'NGMODEL' 01003.488 ERROR_ONCE DX11BACKEND: texture 'mig21bis_fuse_m_dif' not found. Asked from 'NGMODEL' 01003.494 ERROR_ONCE DX11BACKEND: texture 'mig21bis_fuse_m_nmp' not found. Asked from 'NGMODEL' 01003.499 ERROR_ONCE DX11BACKEND: texture 'mig21bis_fuse_m_spec' not found. Asked from 'NGMODEL' 01035.241 ERROR_ONCE DX11BACKEND: texture 'mig21bis_gear-01_dif' not found. Asked from 'NGMODEL' 01035.247 ERROR_ONCE DX11BACKEND: texture 'mig21bis_gear-01_nmp' not found. Asked from 'NGMODEL' 01035.253 ERROR_ONCE DX11BACKEND: texture 'mig21bis_gear-01_spec' not found. Asked from 'NGMODEL' mig21bis_glass_romet.zip

French Armée de l'Air KC130 Skin based on first french C130J delivered december 2017. The file is available for download here: https://www.digitalcombatsimulator.com/en/files/3049021/ Install: Extract the zip into (your drive\user)\Saved Games\DCS\Liveries\KC130

Hi, That might be the case, I will check, Oh, btw, another question: no voice sound was played when I gave order through F10, while the other voice sounds were OK (and answers to F10 oirders as well) Thanks (and this 1st mission was great : congratulations)

Helo In mission 1 (did not go further yet!), when flying back, azimuth steering provided by calling Rucqueville is very off.

I provided my template here https://forums.eagle.ru/showpost.php?p=3314677&postcount=31

Perhaps this is not Super after all, but Extra (300)?

KC130 psd layered psd here If this is useful, here is the one I prepared for my use, downlad here: https://drive.google.com/open?id=1S-yNYej2oTX4Mn4wj8pQQIr5znGG3016

Indeed, , I meant the lua info.

Hello CAS page enables exchange and modifictaion to 9line briefs. And to feed the 9line into the nav & targeting computer There is therefore a data link described in the TAC manual : 1.17 AUTOMATIC TARGET HANDOFF SYSTEM (ATHS) 1.17.1 Description. The automatic target handoff system provides a digital communication link between the forward air controller (FAC), airborne observer (AO), or shipboard system and the AV-8B with a high degree of security, efficiency and speed. The system allows for transmitting and receiving CAS briefs, AAW briefs, free text, on station reports, clearance and abort messages. The system is capable of communicating with both Army and USAF FACs and AOs as well as USMC FACs. Received data is displayed in USMC format. The ATHS provides the following advantages over conventional methods: · Reduces time in a hostile zone while entering mission data into the navigation target logic. · Reduces voice transmissions which may give opposing forces location information. · Increases target data accuracy caused by poor voice transmissions or interference. · Allows the pilot to communicate with the Army and the Air Force.

KC-130 Armée de l'Air Hello Finally managed to upload on the DCS user file site (to be added , with pictures:

French KC-130 Hi, thanks to your template and help, I made a skin for the french KC-130J , being built for french special forces. This is being uploaded on DCS The real thing (copyright Lockheed Martin) - yes it's a -30 long one- :

HI, First make sur the start up procedure is fully completed (not the case on your screenshot, use the (LeftWin - Home cheatto start to make sure this is OK and track down the problem) you have a TV and an IR channel. The IR needs indeed to cool down (4minutes). Also, you may want to go back and forth from P to Ass and back to P on the switch on the console. Good luck!

Hello, Thanks for looking into this matter! Just tested in latest 1.5.7, this is still there. I attach my options.lua How to replicate (Su-33, Mirage, F-15C do present the banding with the following steps) Launch instant mission F2 external view, Press external Zoom in to the maximum Roll back on mouse to see full aircraft. NB: the banding appears for external zoom in at a high level, not only to the max , and is not visible at minimum distance (ie rolling mouse) NB2: The good news: this does not appear to happen on 2.1 options.lua

Hello A generic solution is found https://forums.eagle.ru/showpost.php?p=3248264&postcount=7

Hi, i saw this on su-33, when playing with zoom and distance, and witht the variation you mentioned. Will try to reproduce.

Couteau Delta is the new tactical presentation team of Armée de l’Air, with 2 2000D. For their first season, they have been flying 2000D with colourful special liveries. I have uploaded the corresponding pack (here). I hope you will enjoy.

Polar coordinates (from RL manual): when selecting BUT, press POL, you get azimuth and distance (from any WP (among a maximum of 9) designated by its number) , then if press geo/utm you get geo/utm This can be used as well to enter new WP/BUT. (eg target announced at 120 for 4, easy, or , you locate target(s) az and distance with Viviane, enter theml as wp , and can find them later -or at least translate to UTM and give coords to a better equipped A-10 friend :-)).

Great news, specially for the NADIR polar coordinates. Thanks!

Hello, they're only in the stand alone Su-33. You can get them as described here: https://forums.eagle.ru/showpost.php?p=3256622&postcount=390

Until it is fixed in game, you can easily patch it by yourself, as described here : http://https://forums.eagle.ru/showpost.php?p=3248264&postcount=7

Actually, I am on open beta version. Don't know for main release. And I did not try , but I suppose uninstalling is feasible, as anyway, the module does not appear in my game menus even after "force installing"

The missions are there when you force install the su-33 stand alone. 4 missions in caucasus (CAC, grouynd strike, Gunzo, Take off) To force install : Open cmd and navigate to your dcs "bin" folder and then paste "DCS_updater.exe install SU-33" (make sure its in capitals)