noisy_lightning

Hi guys I am new to the Mi8 but have a fair bit of time with the Gazelle module. So far I love this bird even if it did take some time to get used to with hovering compared to the Gazelle. My question is regards VRS, I understand the principles of getting out of it but seems like I have issues putting it into practice before I hit the ground. Are there any tell tales that VRS is about to be induced and specifically what's the best way to get away from it into forward flight?

Thank you for the canopy information, I was going crazy last night with only a few fps when every other module worked fine. Sent from my ONEPLUS A3003 using Tapatalk

The real life ones can do small loads (plenty of photos online) so it would be nice if we could lift the barrels or ammo crates in DCS. Sent from my ONEPLUS A3003 using Tapatalk

I notwithstanding yesterday as well. It's a nice addition. Sent from my ONEPLUS A3003 using Tapatalk

Magnetic brake it's called. Sent from my ONEPLUS A3003 using Tapatalk

There are two trim options in the gazelle. The magnetic trim which works as you describe in the UH-1H but then a trim which works like a conventional fixed wing trim. I have both bound to my hotas but use mainly the magnetic trim. Sent from my ONEPLUS A3003 using Tapatalk

This is a link to my settings. May help you. https://forums.eagle.ru/showthread.php?p=2999899

Mine is set to mimic trackir too and I have no problems. Sent from my ONEPLUS A3003 using Tapatalk

Lithium or PTFE Grease work a treat on my X55, no chance of abbrasion or negative effects on plastic from either.

Right click the icon in the task bar then click maximise. You may have to close it once you have done this and reopen but should sort it out.

It's the second notch on the power switch not the first to enable transmitting. Can't remember the marking for the switch as I am not at the computer. Sent from my ONEPLUS A3003 using Tapatalk

I just dial the frequency in and it seems to work when talking to the overlord/magic in game. Sent from my ONEPLUS A3003 using Tapatalk

Worth taking a look at this just to rule it out. Sent from my ONEPLUS A3003 using Tapatalk

As Promised, my settings. But First a video of the end result. Main window. Free-track settings Point Track main settings Point Track Clip Settings (Set for my Declan clip) Yaw Curves Roll Curves https://dl.dropboxusercontent.com/u/52501585/OT/roll.jpg Pitch Curves My XYZ curves are all flat. Filter settings. My config (ini file contents) if anyone wants to try my settings. [Accela] ewma=63 rotation-deadzone=1 rotation-threshold=27 translation-deadzone=1 translation-threshold=57 [Curves-tx] point-count=1 point-0-x=100 point-0-y=100 [aruco-tracker] camera-name=PS3Eye Camera field-of-view=56 force-fps=0 force-resolution=0 headpos-x=0 headpos-y=0 headpos-z=0 [opentrack-ui] button-center=11 button-start-tracking=-1 button-stop-tracking=-1 button-toggle=12 button-toggle-tracking=-1 button-zero=-1 camera-pitch=0 camera-roll=0 camera-yaw=0 center-at-startup=true centering-method=1 compensate-translation=true compensate-translation-disable-z-axis=false filter-dll=Accela guid-center={5F6FFA70-2A3B-11E6-8008-444553540000} guid-start-tracking= guid-stop-tracking= guid-toggle={5F6FFA70-2A3B-11E6-8008-444553540000} guid-toggle-tracking= guid-zero= keycode-center= keycode-start-tracking= keycode-stop-tracking= keycode-toggle= keycode-toggle-tracking= keycode-zero= pitch-alt-axis-sign=false pitch-invert-sign=false pitch-source-index=4 pitch-zero-pos=0 protocol-dll=freetrack 2.0 Enhanced roll-alt-axis-sign=false roll-invert-sign=false roll-source-index=5 roll-zero-pos=0 tracker-dll=PointTracker 1.1 use-system-tray=false x-alt-axis-sign=false x-invert-sign=false x-source-index=0 x-zero-pos=0 y-alt-axis-sign=false y-invert-sign=false y-source-index=1 y-zero-pos=0 yaw-alt-axis-sign=false yaw-invert-sign=false yaw-source-index=3 yaw-zero-pos=0 z-alt-axis-sign=false z-invert-sign=false z-source-index=2 z-zero-pos=0 button-restart-tracking=-1 button-toggle-press=-1 button-zero-press=-1 guid-restart-tracking= guid-toggle-press= guid-zero-press= keycode-restart-tracking= keycode-toggle-press= keycode-zero-press= [proto-freetrack] use-memory-hacks=false used-interfaces=2 [tracker-pt] active-model-panel=0 automatic-threshold=true camera-fov=56 camera-fps=60 camera-name=PS3Eye Camera camera-res-height=480 camera-res-width=640 cap-x=40 cap-y=60 cap-z=100 clip-by=40 clip-bz=40 clip-ty=80 clip-tz=80 dynamic-pose-resolution=true init-phase-timeout=500 m_01-x=0 m_01-y=0 m_01-z=0 m_02-x=0 m_02-y=0 m_02-z=0 max-point-size=5 min-point-size=1 model-centroid-x=0 model-centroid-y=0 model-centroid-z=0 threshold-primary=32 [Curves-tx_alt] point-count=1 point-0-x=100 point-0-y=100 [Curves-ty] point-count=1 point-0-x=100 point-0-y=100 [Curves-ty_alt] point-count=1 point-0-x=100 point-0-y=100 [Curves-tz] point-count=1 point-0-x=100 point-0-y=100 [Curves-tz_alt] point-count=1 point-0-x=100 point-0-y=100 [Curves-rx] point-count=3 point-0-x=14.672789896670494 point-0-y=25.116279069767444 point-1-x=48.598163030998855 point-1-y=160.25581395348837 point-2-x=180 point-2-y=180 [Curves-rx_alt] point-count=1 point-0-x=180 point-0-y=180 [Curves-ry] point-count=4 point-0-x=6 point-0-y=15 point-1-x=26.0390355912744 point-1-y=120.55813953488372 point-2-x=50.04477611940299 point-2-y=170.46511627906978 point-3-x=106 point-3-y=180 [Curves-ry_alt] point-count=1 point-0-x=180 point-0-y=180 [Curves-rz] point-count=3 point-0-x=18 point-0-y=15 point-1-x=58 point-1-y=95 point-2-x=180 point-2-y=180 [Curves-rz_alt] point-count=1 point-0-x=180 point-0-y=180 [ewma-filter] max-smoothing=63 min-smoothing=30 smoothing-scale-curve=10

I shall post some screenshots of my setup later on but I didn't have to use keyboard or mouse emulation and I have fully functional 6DOF. Zoom can be achieved by assigning the correct axis to zoom in game but I prefer the thumb axis on my throttle for that. I shall be home in a few hours so will sort the screen shots then. Sent from my ONEPLUS A3003 using Tapatalk

Oh I see, so you are questioning launch authorisation of the aircrafts systems? As in the aircraft will allow you to launch even when the range exceeds the max range of the missile where as some other aircraft would not allow you to release? Sent from my ONEPLUS A3003 using Tapatalk

I have had one or two kills with the 530 from 40000ft and over Mach 1 from over 20nm before. The higher and faster you are the more of a sling shot the missile gets to begin with, not sure if the air density is modeled accurately in DCS but in real life that would have an impact too. Equally though similar kills with other modules so as T_A said nothing unusual. This is one of those occasions where tacview would really help. Sent from my ONEPLUS A3003 using Tapatalk

Same here. I take off then get the radio call saying they will lift once troops embark but they never get airborne.

See I did think that but the other person was convinced that we both use the same...... Never mind.

Is there a way to stop us being kicked if we use the duel aircraft? Me and another player duel last in 2 bluefor F15 and after we killed each other twice we are kicked.

I have the ip of SR already. Some other servers I have played on allow SR to connect automatically when you join the DCS server without having to copy and paste the ip. So once you join the SR server connects in the background automatically as long as the client is running. I hopped between three servers yesterday all of which worked like this without me doing anything. I think it might be a setting on the server side to enable auto connect. The plus side was that more people were using SR as a result.

I tend to have both running. Have a couple of radio binds on my HOTAS for simple radio and a keyboard bindnfor teamspeak (capslock as its not used by dcs). The trouble is finding eh frequency for SR but asking in global chat normally helps with that. OK the topic of SR can you enable auto connect?

Can we connect with the ip direct? If so what is the ip please? Sent from my LG-D855 using Tapatalk

Is the server down? Sent from my LG-D855 using Tapatalk

Tried this before with the A10 and its shockingly bad to use to ended up using one of the 8 way hats instead. Will stick with my current use of the upper hat I think just seems a shame for that mouse stick to be there and never used. Sadly its not a proper analogue stick just a different top for a hat. Sent from my LG-D855 using Tapatalk