Baz000

Flaming Cliffs is like a gateway drug that can lead you into harder drugs like the high fidelity aircraft. That is the best analogy I can think of, I think from a marketing standpoint it is helpful to get people interested in the sim without being so overwhelmed with the learning curve that goes with a high fidelity module. Then, once someone is very comfortable they can always invest into purchasing the other modules and go through the full study sim experience.

looks like the Hornet will have the same issue with the HUD

Okay, I guess this is a good picture to explain what I'm trying to say... If you draw a straight line from where the pilots eyes are looking straight ahead, you will see that the vector you just drew meets the top of the top most HUD glass. So that means that the pilot would be looking at the top of the glass when looking straight ahead in a neutral head position when sitting in the cockpit.

I think either the F-15C player sits too low in the seat in the sim or the HUD is not shaped correctly based on photographs I have been looking at and the view I have in the sim which is the default as I never changed it. Could be the HUD glass is not angled down enough towards the stick, can't put my finger on it but something looks "off"

Thanks for the compliment, I know from reading alot of posts on the forums there is always lots of comments about this or that but rarely ever really any official documents backing them up. Also, this struck me as appealing when I was reading about the HUD on USAF TO F-15A-1 page 1-65: "The design eye position for the HUD, on the main instrument panel, is established by adjusting the seat to align the eye line of sight with the top of the HUD box/glareshield." So I guess if your in your pit and your view is configured correctly including seat height and FOV... Then, what should happen is when you look forward if you draw a vector from your eyes looking straight ahead, it should hit the top of the HUD box / glareshield. Not sure if this happens in the sim, i'll have to check it out and look more closely.

Oh one more thing, the OWS (overload Warning System) this is the system that tells you if you are over Ging or reaching over G of aircraft given the configuration you are equipped with. This does not take into account your loadout IE: 3 bags full missile compliment should not have over-G warning starting at 7.5 G and upwards of 9G. read page 1-57 where it talks about OWS system in USAF TO1F-15A-1 and also read page 1-65 where it talks about HUD and G indicator on HUD... In particular it states the following: "The HUD displays both current and maximum allowable g for existing flight conditions, aircraft configuration, and gross weight. Current g is displayed on the left and maximum allowable g is displayed on the right. The maximum allowable display changes automatically as flight conditions and gross weight changes. The g displays do not use decimal points, the letter g, nor plus or minus signs. If the overload system fails, the g display reverts to the pre-overload warning system display." it also states earlier that the maximum G on the display is limited to 8g. currently in the sim, the maximum g is 9 on the HUD and stays like that and never changes even when configured to be very heavy with 3 fuel tanks.

I would like to report several possible bugs with the F-15C when you look straight up at your lift vector at night time when you have your cockpit lights on, there is a light orb shining down on your pilot seat from above you, in the real aircraft this is a bubble canopy and so there shouldn't be such a light orb at night time. Also, when you have exterior NAV lights and Anti-collision lights turned on... Any time you have your anti collision lights flashing while the exterior NAV lights are turned on, your cockpit seat back is flashing and showing a graphical artifact at night time. Also, the lock / shoot lights have some kind of graphical artifact with the lighting from the sun on the edges of the square mounts... So they flash and glimmer and blind you at day time. And the taxi / Landing lights when the landing gear is raised and lowered is being projected into the cockpit at night time, blinding you momentarily as the pilot. And the behavior of the lock / shoot lights might not be modeled fully. According to USAF TO 1F-15C-34-1-1 On page 1-17 describes the Lock / shoot lights as having this behavior... ON (steady) = the radar is angle tracking on a target (locked on) On (flashing) = in MRM/SRM modes, the central computer has generated the shoot cue indication (small triangle on bottom of TDC box around target in HUD- I think) Currently in the sim, the lock/shoot lights are steady on only and do not flash. how it currently works in the sim is: On (steady) = target is locked and in RMAX for missile shot On (flashing) = not implemented how apparently it should be is: On (steady) = Radar is tracking and locked on a target On (flashing) = in MRM/SRM modes, the central computer on board the aircraft has generated a shoot cue indication under the TDC box in hud (This happens when target is at RMAX and and not past RMIN) According to USAF TO1F-15A-1 on page 2-11 it states as a caution when explaining areobraking that: CAUTION! Limit pitch attitude to 15 degrees to avoid dragging the tail. The aircraft symbol (W on the HUD) will flash at 13 degrees... But in the sim this does not flash / happen... Some controls issues / concerns: quick selection in the sim of AIM-9 missile is not possible without radar activated / already tracking target, I have my HOTAS Warthog programmed through Target to have the boat switch act as my weapons selection... Moved forward selects MRM mode (number 2 on keyboard, so AIM-9 is never selected... I have to select between different MRM IE: AIM-120 or AIM-7 by pressing d key on keyboard, IRL I assume pressing this again will cycle through MRM weapons) Anyways, it is not possible to select AIM 9 with radar by returning to middle position (I do this by pressing 6 on keyboard but this automatically shuts off my radar... Maybe Radar should only shut off if in search mode but not when tracking a target? My work around is to visually acquire and use auto acquisition mode to lock target again quickly either by vertical scan or boresight radar auto acq mode) I have the boat switch when set to AFT = cannon select (by pressing c key) but when returned to missle position (6 key) when radar was in auto guns mode and tracking a target... Again, the problem of automatic radar shut off and loss of lock when switching to AIM-9. see in same USAF TO, pages 1-60C(MRM attack) and 1-61 and 1-62 (SRM attack) also, I like to use TDC as ministick axis on my throttle... I'm looking for good axis curve for it same for flying the plane too, good curve / settings for pitch and roll. And I have some issues with the F-15C Red Flag campaign regarding AI wingmen and fuel consumption / telling them to hit the tanker. As well as the push timing. If I think of any more I will post them up here, I'm trying to keep in mind this is a FC3 aircraft here and it may be a design decision to not fully model some things.

Any news on the desk mounts you were working on designing?

I mean lets hear something on the F-15E, it has been nothing said about it for years now... I hope good news about it in July.

OMG this is the best news I have heard in months!!! You have no idea how jealous I am of the AI F-15E pilots flying nap of the earth and carpet bombing targets in the F-15C red flag campaign, all while i'm at 30k being lit up by SAMs and AI radars. I only hope you guys could collaborate/ gain license from heatblur and be able to get a modified Jester AI for the F-15E WSO.

don't see the F-15E Strike Eagle on the roadmap :(

I followed this and use this for now to change power settings on the fly... https://www.howtogeek.com/howto/windows-vista/create-a-shortcut-or-hotkey-to-switch-power-plans/

Aren't the spoilers on the wings?

On dash 1 manual of real F-5E the taxi / landing lights only operate if the navigation lights rheostat is turned on... Is that the current behavior?

oh yeah, I know where to find those settings... But that disables the computer to go to sleep... I want the computer to go to sleep, but when it wakes up I want everything working like normal and it is not... USB devices stop working (still powered up tho I think)

I have same exact problem

I think i'm gonna go with a 1080GTX because its on sale, and I will go with another 8 gigs of RAM to make my system a 16 GB system...

not understanding, this is for a desktop so I have no battery...

I have OC'd the CPU to 4.5 ghz already

sorry I meant sleep mode, is the one I have problems with... Not hibernate (can't even see how to hibernate my PC)

Well I want it to hibernate, I just want it to work the same as before it went to hibernate when I resume it... (people in the house complain of the PC noise and I hate rebooting the PC all the time...)

Was thinking of getting a GTX 1080 since it was on sale till Wed.

yes, still for sale

in the USA, still for sale BTW

again, still for sale