Snowman

I hope the red side get sams on the airbases in pak 3 as well. Would also be nice if the Sa-6s was working after restart as well. Right now they do not fire and are not moveable after restart. Bit maybe this is a ED problem. Skickat från min GT-S7275R via Tapatalk

This is something I really would like to see as well. Best would be if we could design it in a dynamic way. For example so the mission designer can set how many coalitions he want. I believe this could result in some really fantastic campaigns and multiplayer scenarios. I would actually like this more than new modules. Skickat från min GT-S7275R via Tapatalk

My specs are Intel i5 6600K 32 Gb RAM 2x 960 GTX in SLI System drive on M2 SSD NVMe DCS installed on SSD PCIe See DCS log in the first post

My DCS crashes everytime I'm switching slot. What could casue this. It has been liike this for a couple of months now. I have also made a repair of my DCS installation. Any ideas what to do about this? Anyone else have this problem? dcs170610_1400.zip

Is it necessary for the Mistral on the blue side to be able to both call in a bomber and carry troops? One Gazelle Mistral can take out and capture a farp on its own this way. I haven't found anything similiar on the red side yet. Is it the same for the other types of gazelle as well?

I've been experiencing this sometimes usually as soon as I reach speedes over mach one. Specially if I fly with attitude hold and disengage that in supersonic speedes then I blackout instantly just because of the trim isn't aligned with the attitude hold. That blackout has always been unrecouverable. I think I never been able to have tunnelvision in the viggen yet. I hope this is considered as a bug and get fixed. I haven't experienced this severe blackouts in any other dcs aircraft yet. Skickat från min GT-S7275R via Tapatalk

Tried that allready. No difference for me in trimming speed.

I know how to set the parking brake like that. The issue occurs when after I have landed and sets the parking brake but even if the parking brake is set and I throttle up the aircrafts starts moving without any resistance from the brakes.

I have noticed that the parking brake isn't working as expected. It works before first take-off but after one sortie I usually set the parking brake again and when I'm starting to taxi again the parking brake isn't doing anything to hold back the aircraft. It just roles away like I've would never had set the parking brake. This doesn't really bother me there are far more important bugs to fix. Keep up the good work LNS.

I'm experiencing the same issiue. Takes forever to set the take-off trim for example.

Thank you for that update. Keep up the good work. Maybe that was another thread I've missed reading about it. Hard to kepp track on them.

I don't know if anyone has mentioned this before but when I come back from a first sortie in a mission the TAKT output hasn't been updated. Looks like the computer thinks everything is still there. After rearming the computer only gets updated on the left air to air pylon. The remaining pylon stays empty for the computer. The TAKT out then reads 100000 even though I have rearmed with ordnance on all the pylons. If I rearm with clearing all the pylons the TAKT out reads all zeros and after that rearm with ordnance again TAKT out reads 100000. I hope this gets fixed soon and also the problem with unlimited weapons. I think that would save us alot of time in testing and training on the Viggen.

I have discovered that in todays update there are still a problem with the BK-90, at least for me. The last BK-90 is not being fired even if I load up with 2 or 4 of them. Only tested with deployment in series so far. When this happend I also tried to switch to single release of the remaining BK-90 but that didn't work. Bombs are not being released after I have rearmed, seemes however to be working with rockets for me. Something has happend to the landing sequence in Landing Nav. When switching to Landing nav and Lb1 waypoint the commanded heading on the HSI is located about at L1 or LS instead of the Lb1 location on the radar. Lb1 on the radar is about 5-10 km closer to the runway then in the previuos version. However it does look like an improvment with the hud symbology in the transition between phase 2 and 3.

I've been having this problem as well. I can't get the EP-13 to work or fire any RB 75 after I rearmed. Couldn't release the bombs either after a first loadout with RB 75s.

I've seen this as well. It should be located on the left panel

I have seen this as well. Will try to switch to a different airport for both primary and seconday landing waypoint to see if it goes away or not.

:thumbup:

Here is one log. Not sure if it exists in that one. Because I've been in and out of DCS plenty of times the last hours. However the behaviour seems to stopped for the moment. Updated my nVidia drivers a moment ago. Sound strange if it is related to that only for the mirage and not the other aircrafts. dcs.log.zip

Where would I found a log for this?

It seems to only be the mirage for me that does that. It works while flying though but there the mouse cursor disappears after a while.

My mouse cursor started to disappear sometimes today after the update as well. Got it back after hiting switching between programs with Alt+Tab 3 times. A while later its completly gone nomather what. This was i MP Blueflag server Tested this also in a clean(no scripting) singleplayer mission and the cursor changes to Windows standard when you are active in the radiomenu. Closing the radiomenu gets the cursor back. Maybe going to test a longer run on this in singleplayer later and see if it disappears completly the same way as it did in MP BlueFlag.

Hi When I'm editing my controls in DCS options menu I get a black screen when I'm clicking OK. DCS gets stuck there and force quiting DCS is the only way to get out of there. The settings doesn't get saved. This needs a hotfix ASAP.

That article also tells some stuff that I didn't know before. One main thing that cought my attention is that apperantly the Swedish AirForce was pretty aggressive in close monitoring off the Russian planes. The Swedish pilots thought that the Russians was practicing attacks on Sweden but according to the Russians they were actually practicing against figured NATO targets. Today compared to then its the Russians that are aggressive in close monitoring the Swedish planes. There have been several incidents when the Russian planes have been coming way to close. Even to civilian traffic over the Baltic Sea, specially the southern part.

Thanks Ian. The baudrate change worked really well. About the capacitors and the resistors I allready knew about that. I had bought a small Arduino LED kit with the LED driver. So this time I tested it with the 8x8 matrix that came with it. Worked fine except for the unorgized leds but thats because I didn't take time to change the arrayorder in the sketch. Going to test this with some real leds in a 4x12 matrix later when I have some more leds for it. Also going test this with my Mega as a master(I2C) and the Uno as a slave with the 7219 connected to the Uno. If I will be going for building a pit for myself in some distanced future I might going to have my Arduino mega as a master and smaller Arduinos as slaves. If the Mega isn't up for it I might go for something faster like a Intel Galileo or something like that. For the near future its pretty much only going to be prototype testing on breadboards

Hello all! New to the forum and a little bit new to the simulator too. I'm lifting this older thread because I'm trying to get the CLP panel to work with this setup. I have both the Arduino Uno and the Mega. I get the same result with both of them. Nothing happens and then suddenly all the led light up for a while and then go off again. I have been testing my setup with the 7219 and leds with a loop that test all the leds and that works fine so I don't think there is anything wrong with the hardware. I've been using the ino sketch posted earlier in this thread or I found it somewhere else. https://gist.github.com/jboecker/1f37b5c0b44aec0d3f80/revisions Is it working with that sketch and with which one of the revisions? The latest? I also found something in another thread about this and that the Arduino can't handle the load of all the LEDs. Don't remember where though. Could that be the problem for me? Do I need to power the LEDs separatly?