OldE24

the yellow needel was AT 8 as i was falling to the ground....i was high and fast at the time making a turn out.......when it hit 8 there went the wings.....dont remember fuel load but i was down Some as i had burned to my location, HADNT even warmed my pilot up and he didnt black out......but the airframe did. 1300T is what indicated in BVR mode on the SU...somewhere around mach 1.1 ish. i can go low and MAX the needle out all day but up high it comes off at 8G's on the first tug. seems alittle overdone.

So. had the wings come off with 8G's at 1300T with 2 R73's on the wings.......umm i understand they Over g...but 8??????

yeah like CCM is about useless right now. and radar is hit and miss...getting better but still wip

ALSO NOTE If you turn the master caution or hyd switch i dont know witch before you push the starter button it wont engage... FOLLOW STEPS 1. TURN BAT ON 2. fuel switches on x3 3. CHECK throttle is in cutoff if your joystick has moved it may not be. PUSH RED BUTTON IN MIDDLE OF THROTTLE MOVEMENT. 4. Start button wait to 11% move throttle to idle. The only failed starts i have had is when i turn electrons on i shouldnt before i start OR the throttle is not in cutoff.

i had 8 bought 16 and now 24. ram compatibility may vary. having the game installed on SSD is also known to help.

what about combined arms units? more deliverable units?

you almost cant Visually see it but if you look at the instruments you an tell it's like a Vibration when stopped, to the extent it wouldn't let me Rearm and refuel until i braked or moved forward a little.

there seems to be this Shake that happens on the ground after engines start. small and fast.

RAM: 8GB welcome to the ability to max out your ram.....the lag is the game pulling off the HDD.

Deselect special modes changes RADAR to ENT, but switch on console stays forward.....

that's easy red lines are jamming like you would see in SU/F-15, what i'm trying to figure out is what is difference between BFR ENT and HRF. the symbology changes in BRF to what zeus talked about the boxes but i missed what each settins exactly is. the radar elevation keeps going WAY up or WAY down causing issues. at burn through the line goes yello....then green if friendly.

there are GOOD mods and Bad mods. and there needs to be a integ check to filter out the "BAD" mods.

ok if ONLY your potato internet causes warping then why do some of these chuckleheads try and Printscreen there way out of a missile??? oh yeah because it can cause lag. you can keep your 5TB HDD for storage. and use a SSD for DCS/windows. or have 3 Drives.

+1 exactly it was the MICRO stutters i used to get even worse on a WD 10K raptor drive...tho it does have 26K+ power on hours now.

it's not a matter of booting, DCS uses your HDD and if you ever Zoom or certian things you CAN get a lagspike because it HAS to read from HDD......you will notice it when you Zoom or look around sometimes or as your view changes.

who knows, but what does it matter? either you will update 2.0 and delete 1.5 or you will delete both and install 2.5. common sense would tell us that.

if you all are flying the M-2000 YOU NEED TO CHECK THE MIRAGE FORUMS, it's been broke working on 2 weeks now. http://forums.eagle.ru/forumdisplay.php?f=322 Basicly for what ever reason WHEN YOU RADAR comes out of warm up and THERE IS A JAMMER in the air you CTD..... the problem with having incompleted modules and people who dont follow development. "well as it was not with the 1.5.3 updates there were different versions being played MP because they were just "updates", that's where the hope of a MOD file FIX to at least make it Flyable in MP. But it's understandable both ways. FYI as it is NOW you can play UNBROKEN mirage in MP with "DCS_updater.exe update 1.5.3.51417" this is the only working mirage patch that is aviable and is the OLDER version with the OLD switch logic. if ED would of left "1.5.3.51870" aviable on the updater would of been nice."

I have not seen this maby you could LINK to it? i like this idea MP IC....RIP LEAVU 3 and Missile mod users, and BS like this that doesnt belong in MP.

Your not a very helpful person are you??

[ame] [/ame] with enough altitude..even the big ones Can. this one has no audio..but there is a version with but could not find.

Depending on version it should work..not positive if rearming is fixed in 1.5.3 as to broke to play mp BUT its the WHITE handle on the left side near the canopy rail.

I dont mind mods but this just takes easy mode to a whole new level......

This idea of "Mission ballance" doesn't work right now for large servers......the modules have different uses so you have SU-25 on one side and A-10 on the other this doesnt balance out..because the 25t/a-10 have different loadouts and do different things like sead and GBU's. It's a good idea and all for it, but wont happen on scale untill there are modules that can fill teams, you would unbalance the map by splitting them up.

this sounds like an administrator issue.....i dont EVER loose bindings. are you running the game as ADMIN? it sounds like it's not saving the changes. MAKE SURE EVERYTHING IS RUN AS ADMINISTRATOR, sounds like a UAC issue not saving your changes because your not admin.

i suggest going in to you MODS/M2000 and DELTE THE MOD FOLDER then run DCS REPAIR and should fix problem, if there are not more people having this issue it's YOUR issue. but if there is a JAMMER it CTD's so i have not played as it's "broken" in this state. i have had other issues like this with different modules and always fixed by just deleting the aircraft mod folder and repair to redownload,