PLUTON

https://discord.com/channels/536389125276827660/544216334045544448/986678972031062057 Upcoming Mirage Changes for Next Week's Patch DCS M-2000C by RAZBAM Simulations ================================= Redesign of the M53-P2 engine model - Improved: New engine physics model - Improved: Evolution of performance with pressure, temperature, speed - Added: Precipitation effect - Improved: More realistic transient - Improved: More realistic FADEC with alternation (SEC CALC) and emergency (SEC CARB) - Added: SEC CALC can be set manually or automatically and reset manually - Improved: Engine alarms - Updated: Adjusted drag (aircraft and stores) to match engine performance - Added: Supersonic extinction in slow motion - Updated: In-flight restart held by solenoid - Added: Motor physical data recording function - Added: Engine smoke on damage/fire (not yet synced MP) - Improved: No more engine failures - Added: Physical performance degradation - Added: Engine overheat damage - Added: Engine fires (main and afterburner) - Added: Cascading engine damage (compressor explosion can cause further damage) - Added: engine damage with high mach and retracted cones - Added: oil leak modeling and DRY OIL switch (emergency oil) - Added: Pistol damage - Improved: the 4 slats can be damaged independently Weapons - Added high and low drag SAMP250 bombs Various - Added: absolute BAD coordinates in DTC text format - Improved: AP pitch correction is less aggressive - Improved: more realistic HUD FOV and constrained FPM/target box law - Added: fuel dump trails (not MP synced yet) - Improved: Exterior light levels - Improved: Landing gear model - Added: Customizable elastic limit (threshold of stick G limiter based on force) - Improved: Aerodynamics of the airbrakes - Improved: Green radio guard watch added to SRS Liveries: - Tigermeet liveries have been renamed to avoid being set as default - Added MISSION ACCOMPLISHED retirement celebration livery Bugs - Fixed: Default green radio channel set to 01 - Fixed: PCM prompt remains when SABER is off - Fixed: RWR threat display issue in some cases Edited June 15 by rep3t3 with an update of this size I would be surprised that ED forgot to put the update notes!!!!! right?

let's hope so

Normally yes it was for today This update is expected to hit open beta later this month. this is what was written at the beginning of June 22

Product sold good flight

Have you tried removing the latest windows update? Because it happens that an update prevents a vr installation from working properly (it happened to me)

edmus said: I think it's in the system tab under the alternate resolution. The 100% resolution on the G2 is 3176 wide, especially if you're using MSAA you should be able to go to 2800 wide without significant quality loss but with a noticeable performance improvement I think it's In the OXRTK the setting you're talking about!!

I did as you told me Mr. Hammer1-1 and it worked well thank you for your advice and good flight

Mr edmuss could you explain this to me? (Change the resolution to around 2600-2900 wide on the G2. Enable FFV on the quality/wide (slowest but best looking) preset. because I did not understand what these settings are and where they are! thank you

Here I made my settings according to my eyes and how I feel when I fly. In the OXRDT I set to 100% and MR activated (because without I have stutters). In the OXRTK the setting with the foveal rendering activate at max. I'm at 60% and my fps are locked at 30 with between 19 and 22 ms the reprojection indicates 1/2 . My fps vary between 29 & 31 depending on where I am. I tested and it seems to be going well it's very fluid in SP flight anyway I never fly in MP. There are still some adjustments that I haven't made because I don't speak English I absolutely don't know what that means. if you still have advice, I'm open to improving it again and again. Good flight edmuss and to all for your time and thank you PS: Openxr changes all in DCS and makes flight immersive I forgot to tell you that with all this I allowed myself to put msaa on x2 which could not be done with Steamvr. I especially don't want to spit on Steamvr because it served me well but Openxr is the size above.

Ok I will operate as you advised me and I will come back to you and report the results thank you in advance

I just saw that after repairing OB the VR box was unchecked. Now it works fine, but I would like to see how to configure the parameters

How do I get DCS Open beta with stable DCS in the Open Composite window? Thanks for the help

Honestly, I don't understand anything about Skatezilla's utility, so I'm going to redo a repair via dcs and I'll delete save games and delete D3Dcompiler dll and normally it should work, right?What do you think Hammer1-1

the only thing i did was to clean my dcs open beta by dcs itself because the Skatezilla utility is in English and I don't know what to check or not in this utility. moreover in open composite appears DCS is the same (as I have 2) I do not know which one he took into account either OB or Stable?

Yes I saved it in the documents just in case

Hello, I switched to openxr that I downloaded as explained in the forum, I followed all the steps and when I launch dcs open beta it's not Openxr but steamvr that works? I did what wrong? Thank you for your answers gentlemen you who managed to make it work

ok I will do and I will tell you again about it, it will work, in the meantime Thank you edmuss thank you burnt out and thank you to everyone who helped me with their comments; good flight to

well I have no choice but to try OPENXR I have to start in the big leagues

mister broke said: Not sure I fully understand this statement "when he wants to walk". I mean when I fly and everything is fine with no fps drop problem and thank you everyone for taking your time to help me what is HAGS activation? please mrs edmuss

fpsvr was showing when I was flying a CPU with a fixed 30fps and a frametime of 17.6 and a GPU with an fps between 6 and 17 fps and a frametime between 48 and See Up to 150ms in the red of course. I would like to try Open xr but it seems complicated to install and adjust?

very good question the picture time is good the frametime? Because if this is the case it climbs between 48ms see even it goes up in the red at 150ms. On the other hand, I uninstalled fpsvr and it seems to be better.

15 minutes ago I start my flight, I start to taxi and go to the start of the runway (as I am at 60hrz I have 30 fixed fps and a frametime of 19ms) I take off and all of a sudden my fps goes to 13 fps and my frametime At 48 ms or even 85 ms and of course it is unplayable. So I immediately opened the task manager and I see that DCS is in the red and the consumption is high. so what do you think is going on? knowing and I repeat that when he wants to walk it will be fluid and I could fly without problem until I change mission

Yes I would but honestly I wouldn't know what to look for

yeah because I'm tired of spending 3 hours for it to work and flying 1/2 hour and starting the next day the same thing; because the worst thing is that when it works 45fps fixed and fluid and when it starts to mess up it's between 6 and 20 fps and between 30 and 150 ms, and I don't understand why once it works and without doing anything n changing it works more, very disappointing

I looked and did not see any execution program everyone is very weak null