morek99

Great achievement [emoji122][emoji122] !! PM sent :) Gesendet von iPhone mit Tapatalk

First time for me, but thank you for pointing out it may happen regularly, will check in the future, that’s for sure [emoji106] Gesendet von iPhone mit Tapatalk

The Force feedback setting was the problem. Had to look it up where to find it as I NEVER used it or checked it on before. Must have activated by itself. Thank you guys so much for the help, now everything is working flawlessly again!! Gesendet von iPhone mit Tapatalk

Very strange in deed. It occurs regardless of cold start or fast free flight mission. The really odd thing is., the little chevron in the Flight Control Window moves, the Hotas knobs move, the plane just doesn’t react, as if trimming was switched off completely, no way to do that in the A-10 to my knowledge Gesendet von iPhone mit Tapatalk

For some weeks, trimming has no more effect in the A-10C II on my system. Trim Hat is assigned as usual on my Warthog Hotas, even the trimhead in the Virtual cockpit is moving accordingly, but the aircraft remains trimmed for approx 165 knots and can only be flown with constant nose down input on the stick. Did a reinstall already, no joy. Any thoughts on that? Thank you Mirco Gesendet von iPhone mit Tapatalk

Hello there! Got a Reverb Pro now and like the performance and high definition a lot, compared to my Rift S. But the software is killing me. Got it all working according to vr4dcs , but as soon as I activate Motion Repro in the config file, the Head Tracking stops working. Anybody got an idea before I send it back to HP? Thanks a lot!!! Gesendet von iPhone mit Tapatalk

Yes, stupid me, read the whole thread AFTER my post ;) . But I found a solution at last. After doing the absolutely forbidden faux pas of using the windows calibration for the cougar once in the past, windows wrote the calibration data into its registry. After using CCP with auto calibration, the old data interferes with CCP and causes the bias. The in Foxy included HotasCleanse.exe that is exactly for the purpose of cleaning the registry doesn’t seem to work for windows 10, so I started to erase the reg keys manually. Then I discovered Clear Calibration Utility by Logitech that did the job. Now everything is working as advertised, the cougar is perfectly centered again. A lot of research and fumbling, but totally worth it, hope it helps ;) Bert regards Gesendet von iPhone mit Tapatalk

Hi there! Any news on your problems with the cougar? Have you ever tried connecting it to another pc? I have two Cougars, one with standard gimble, the other with FSSB2 . Both are alway of center on both , x and y axis by a fixed amount of units, regardless of how i calibrate them. the interesting part is, as soon as the ccr viewer starts, they show perfekt center, until i touch then. immediatly they are of again. Now the fun part: as soon as i connect them to any of my three other pc, win xp, win7 and win 10, both work like a charm, perfect centered and calibrated. a tried everything, even the HOTAScleans.exe application in Foxy, nothing helps. Try on an other pc to see if it is the same issue, at least the you know that nothing is wrong with your cougar, it seems to be a maschine specific problem. Maybe we find a fix in the future best regard!! mirco

Interesting that the Oculus Store isn’t the fastest way. I ordered on Saturday with a online store in Germany, tracking says only 4 more hours until arrival [emoji15] Gesendet von iPhone mit Tapatalk

Hello! Still available? Gesendet von iPhone mit Tapatalk

Today starts the F8 Facebook Developer Conference where more information concerning Oculus Rift S is expected ( hopefully ) Gesendet von iPhone mit Tapatalk

Hopefully!!! If these work as advertised they’d be the most promising VR interface on the market IMHO, way more useful than these useless captogloves that seem to have no real tracking at all ( if I’m getting it right ;) ) +1 Gesendet von iPhone mit Tapatalk

Yet another warthog slew upgrade

Here you go: { down = iCommandPlaneGearUp, up = iCommandPlaneGearDown, name = _('Landing Gear Control Handle - UP/DOWN'), category = {_('Special Toggle')}}, Just add somewhere in the joystick.lua . Made up the Special Toggle Category to find it quickly

OpenHornet F/A-18C 1:1 SimPit (WIP) Seems to be a really thought through concept, I can hardly wait to see the first results. A great pit would be the only thing to get me back from VR flying, and the DCS Hornet now come quiet handy as the perfect plane to build a pit for. Really great you guys know your stuff as it seems [emoji6] Gesendet von iPhone mit Tapatalk

Sounds terrific! And all the Interfacing will be done by Arduino Cards and DCS Bios? Gesendet von iPhone mit Tapatalk

OMG, this is incredible!! Great work so far, can’t wait to see more! And it shows great attitude and spirit to offer your work to the community! Thank you in advance!! Morek

Bei mir war es der nvidia treiber, zurück auf ne ältere version, alles gut. VIelleciht hilfts ja ;)

Moin! Ich hänge mich mal hier mit rein, denke ich habe das gleiche Problem. Monatelang lief alles smooth ohne Probleme, mittlerweile aus MSI 1080TI Gaming X, seit einigen Tagen (gab es ein Update bei Oculus??) habe ich sobald ich auch nur dezent Overclocke diese Doppelbild, sobald ich ASW einschalte. ASW aus, alles gut. Eben mal ne längere Mission in NTTR geflogen, bei der Landung im Regen wieder der selbe Mist, bin auch ratlos, das trat von heute auf morgen auf. Interessiert an JEDER Idee. Grüßle Mirco

Never mind, found it ;) . Anybody having issues with leobodnar boards and HIS rotary encoder control just contact me ;) thanks anyway

Hey Guys! It might be a little off topic, but this is the only thread a found concerning editing lua files to make custom controls work. So here we go ;) Can anybody help me with adjusting the sensitiviy of the pressed_ event setting HSI Course and Heading? As long as a pressed call is used, it jumps 5-12 degrees at a time which is useless. Changing the event to up_ lets me control it in one degree steps, as there ist no event buffering, it unfortunately takes a minute to make a 180 degree turn. Any idea or workaround would be highle appreciated ;) Greetz Mirco

Ah well, the pixel density explains it to me rather than the VRAM Bandwith or System RAM . I run it always in 2.0 pd. To fly around in Vegas an maintain 45fps using ASW is no factor at all. I recently took your settings, overclocked my 1070 to 1925MHz Boost and can now maintain 45fps during the first two missions of Piercing Fury. Just some short term drops to 22fps (5sec) in moments of R/T displayed on screen and only in certain directions of view. Quiet odd nevertheless. But I´m happy so far, Rift finally looks good and is absolutly playable, even after the last weeks of crisp 4k flying on the flat screen ;) . The immersion is unbeatable and the hog now finally feels like a real plane :) Thanks so far und best regards

Good morning, any information on the pixel density setting? i run the 6700k at 4500mhz with a 1070GTX and cannot maintain 45 fps , espacially in a combat situation. my system maintains 45 fps from takeoff to a certain poont where it suddenly drops to 22 FPS. appears quite strange to me, any thoughts?