NoPro

Jep, +1. +1. Thanks for opening the ticket! Hope they’re resolving this quick

Sorry to say but it is still the same! Connect GPU to the jet and as soon as you switch the Generator’s to external, Jester is cropped and you only hear “….do you want?” Any chance to get the full message?

As with the latest Update, we have some Airfields “twice”…..the one made by Ugra Media and the Syria Map as well as the Sinai Map by OnReTech. When you compare these two, a lot of buildings, HAS etc. are completely different. Does anyone know which developer or which map is more accurate? cheers

So nothing regarding VR performance?!

And this bug contains both things I’ve mentioned above? cheers and thanks for the quick reply

During the start up procedure, Jester asks which type of alignment I want but not the whole message comes through. After alignment completion there is no more more “you can go prim and sync now”. I only know the alignment is complete because of the RWR. Was this phrase deleted with the latest update or is it me who is doing something wrong (most probably the case) and what should I do to hear Jester’s complete message at the beginning? - Helmet is on - ICS is HOT MIC

Jep, you were right. Guess I found the problem. I had my thrust levers in the cutoff position and I was putting them into the idle detend when the mission was already loaded and just the briefing window was open. So I guess I have to put my throttle in the correct position before I load the mission. I thought the briefing window is still good enough to do that….. thanks for your help dude!

Hey man, thanks for your quick reply :-). I don’t ever had and have any mods installed…..just pure official things ;-). I was suspecting the same and did a normal cold start mission with the F4 and all went as expected. Yank does call ground and I get a reply plus all switches in the cockpit are set to “flight”…..only the engines are not running.

When I start the FAM mission, the instructor tells me that we’re getting refueled and I should tell him when I’m ready (press space bar) BUT the jet is off and so I started her up BUT Jester doesn’t ask me to align so I do not have navigation and the caution message “inertial navigation off (or something like that). What am I doing wrong? cheers

When I’m doing the Ailerons/ARI (Flight Controls) check, the crew chief responds to my inputs but after I have my stick fully deflected to the left and engaged the yaw aug switch & getting the “kick”, I do press the emergency quick release lever and I don’t get a “rudder neutral”. On the right hand site it is working flawlessly.

YouTube knows more

Having the same Issue. It seems that it does effect only player controlled aircraft’s, not the static nor AI planes.

Maybe a „follow flight plan / cruise mode toggle“ Or something like that. Leave it up to you guys and your help is much appreciated . Thanks

So, it didn’t worked. No matter what I press, he‘s stuck with the flight plan following and doesn’t get back to cruise mode except if I toggle the AI off and then on again.

I’ll give it a try but I think I tried that already but I’m not 100% sure

How do I get the AI back in cruise mode once it has been in flight plan following or terrain following without toggling the AI off and on again?! Cheers

There are more problems with the AI. If you’re in “follow flight plan or follow terrain” mode, you can’t revert to a heading or something. You need to deactivate and activate the AI so he’s back in “cruise” mode. Or did I miss something and there is a way to set the AI back in “cruise” mode without toggling it on & off?!

Really? I have to click the IZLID button?! That was driving me nuts yesterday as tried nearly every button on my cyclic and collective to get it to work….thanks for the heads up but surely it needs to be fixed

Yeah, it’s a pity that you can only change between UTM with Metrics or Lat/long with imperial….but according to the real life guys, it was like that. Maybe there will be a change in the future so we can mix the set up

Thanks! I was just wondering why the rearming/refueling panel as well as the mission editor and the CMWS display are showing me a „C“ with a number next to it. I can’t change this number in one of the above mentioned options BUT to me it looks like there are chaffs loaded…..therefore the question. Maybe it’s a bug?!

I’ve read the manual but in my opinion this doesn’t give to much details on my question. I do know about the function of the Auto/Bypass switch but how do I dispense Chaffs?! If I have the switch in Bypass and press the release button, it only flares. And how do I program how much flares or chaffs I want to dispense? The ASE page has no option or similar for this to program. cheers

Edit to my post from above. Tried it in the ST version and it worked as it should be without any changes. Seems to be an MT version issue. The lowest available so save performance resources. The fullscreen tickmark is checked but anyhow it is kind of windowed with this low resolution

Same Issue here. Having a G2. The “use DCS resolution” checkmark was already set from my previous settings within DCS. Now I’ve checked and set the HBUI override to the DCS resolution and the wheel isn’t cutoff anymore but it is still Offset and not usable with headtracking as well as the offset function of the UI, it does nothing for me, no matter what value I enter. Will try, just for testing, the ST version and will come back here.

Will try that, thank you!

Can someone confirm that we still have the issue of rudder trim being added up? I mean, if I put the rudder in a certain position, let’s say half deflection and trim it, it stays there (in game). My physical pedals are centered thereafter, now if I put the pedals a quarter in the same direction again, my understanding is that the new position of the in game pedals should only be that quarter deflection but as of right now, at least for me, it adds up the deflection so my in game pedals are now 3/4 deflected. I hope I made myself clear here and everybody understands what I’m talking about. This was a present issue some time ago if I remember correctly, is it still present or just me stupid guy?!