Jump to content

Recommended Posts

Posted
The oilrig is fantastic but i have a massive FPS drop near it. From 60 to 24 over the helipad.

 

Hi,

 

I have nearly the same hardware, except that I use Win10 and a GTX960. My FPS drops from 60 to 50 over the helipad. With lower shadow settings I get more FPS.

But I will try to optimize it to get always 60 FPS.

DCS Mods and Skins: HiDrive

Use the NAS only if the other Link is not working - it's slow!
My DCS MODs and Skins: NAS

Posted

That would be fantastic, because the Oilrig looks so good, specialy at night.

 

I play with shadows in High and Flat Shadows On. Maybe turning down shadows to medium would increase FPS.

" You must think in russian.."

[sIGPIC][/sIGPIC]

 

Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´

 

Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4

Posted (edited)

Upuaut ;)

 

I've rename these these 4 files like that is it good ?

 

single Helipad concrete -----> helipadSC

"single Helipad Marsden Matten" -----> marsden_helipad

single Helipad sand ------> sand_helipad

single Helipad concrete clear -----> concrete_clear_helipad

 

My db_countries.lua:

"comtower_helipad",

"concrete_clear_helipad",

"helipadgrid",

"helipadgrid_mi",

"helipadtower",

"helipadSC",

"hospital",

"Leuchtturm",

"Leuchtturm_land",

"Leuchtturm_land_military",

"leuchtturm1",

"marsden_helipad",

"redsands",

"sand_helipad",

"seafort",

 

My db_units_ground.lua:

fortification( "comtower_helipad", _("comtower_helipad"), "comtower_helipad", 100);

fortification( "concrete_clear_helipad", _("concrete_clear_helipad"), "concrete_clear_helipad", 100);

fortification( "helipadgrid", _("helipadgrid"), "helipadgrid", 100);

fortification( "helipadgrid_mi", _("helipadgrid_mi"), "helipadgrid_mi", 100);

fortification( "helipadtower", _("Helipadtower"), "helipadtower", 100);

fortification( "helipadSC", _("helipadSC"), "helipadSC", 100);

fortification( "hospital", _("Hospital"), "Hospital", 100);

fortification( "Leuchtturm", _("Leuchtturm"), "Leuchtturm", 100, true);

fortification( "Leuchtturm_land", _("Leuchtturm_land"), "Leuchtturm_land", 100);

fortification( "Leuchtturm_land_military", _("Leuchtturm_land_military"), "Leuchtturm_land_military", 100);

fortification( "leuchtturm1", _("leuchtturm1"), "leuchtturm1", 100, true); --on water

fortification( "marsden_helipad", _("marsden_helipad"), "marsden_helipad", 100);

fortification( "redsands", _("redsands"), "redsands", 100);

fortification( "sand_helipad", _("sand_helipad"), "sand_helipad", 100, true);

fortification( "seafort", _("Seafort"), "seafort", 100, true);

 

Upuaut please can you tell me if it's a mistake from me :helpsmilie:

 

I play with shadows in High and Flat Shadows On. Maybe turning down shadows to medium would increase FPS.
Me too I have this FPS drop

 

Thanks again, Skull :thumbup:

Edited by Skulleader
Posted

Hi Skulleader,

 

which name do you want to change? The name in the Mission Editor or the name displayed in DCS?

 

For the name in the ME, it is in "db_units_ground.lua" the name in the brackets.

 

For display in DCS it is the name at the beginning of the line and also the name in "db_countries.lua".

 

The third name is the shape-name from the .edm file. And this name is also set in the "StructTable.sht".

DCS Mods and Skins: HiDrive

Use the NAS only if the other Link is not working - it's slow!
My DCS MODs and Skins: NAS

Posted
which name do you want to change? The name in the Mission Editor or the name displayed in DCS?
Hello Upuaut,

 

In fact I have just changed these 4 names from my StructTable, db_countries.lua and db_units_ground.lua.

 

 

"single Helipad concrete clear", ----------------------> "concrete_clear_helipad"

"single Helipad concrete", ----------------------> "helipadSC"

"single Helipad Marsden Matten", ----------------------> "marsden_helipad"

"single Helipad sand", ----------------------> "sand_helipad"

 

 

Here my StructTable.sht:

https://www.dropbox.com/s/6vtx6gxbtudzx0h/StructTable.sht?dl=0

 

My db_countries.lua:

https://www.dropbox.com/s/jcb7irdsg3cg5dt/db_countries.lua?dl=0

 

My db_units_ground.lua:

https://www.dropbox.com/s/ncq420hd98z2vwf/db_units_ground.lua?dl=0

 

Thanks again, Skull.

Posted

Hi Skulleader,

 

did you make a test if it is working with the changed name?

DCS Mods and Skins: HiDrive

Use the NAS only if the other Link is not working - it's slow!
My DCS MODs and Skins: NAS

Posted

Hi,

 

WIP addon replacement for the smokepod of the western airplanes.

 

sanders1.jpg

 

sanders2.jpg

DCS Mods and Skins: HiDrive

Use the NAS only if the other Link is not working - it's slow!
My DCS MODs and Skins: NAS

Posted
Hi Skulleader,

did you make a test if it is working with the changed name?

Hi Upuaut,

 

Excuse me for the delay of my answer, week really busy..

Yes everything work fine, this morning I've fixed one mistake from my part but now averything is good.

 

Here the three files and please can you test it and tell me if it's good for you ?

 

db countries.lua:

https://www.dropbox.com/s/jcb7irdsg3cg5dt/db_countries.lua?dl=0

 

db unites ground.lua:

https://www.dropbox.com/s/ncq420hd98z2vwf/db_units_ground.lua?dl=0

 

StructTable:

https://www.dropbox.com/s/6vtx6gxbtudzx0h/StructTable.sht?dl=0

 

Thanks in advance, Skull.

Posted

 

 

 

Hi mondaysoff,

 

I have it tested on two PC with new installations of DCS and it works everytime.

Try the "helipads_only" file from dropbox if it works. You can also check the log files for errors.

 

Hi upuaut.

 

After a lengthy time away from DCS, I've got back to this and started afresh again as I couldn't remember where I left off. So I did a clean install and also cleared out my Dropbox and redownloaded your mods. I also put the contents of the " staddons" zip in the temp textures folder, now everything is running sweet.

 

Thank you for your time and effort.

 

 

 

 

  • 2 weeks later...
Posted

Just discovered this thread,Your mods are amazing brings so much life back into the game.Dcs need to hire you.

 

Great work keep them coming :thumbup:

Posted (edited)

Hi Upuaut.

 

The new 1.5.3 DCS version is incompatible with your helipads cargo mod.

 

If you could be so kind to take a look at it i will be very pleased.

 

PD: Nevermind, now the 2.0 version is working with 1.5.3 new folder structure.

 

Thanks,

Edited by Esac_mirmidon

" You must think in russian.."

[sIGPIC][/sIGPIC]

 

Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´

 

Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4

Posted

It´s because folder terrain changes location. Now it is in Mods/terrains/CaucasusBase/Structures/High/EDM (location, where EDM files of cargomod should be placed)

MSI Z370 GAMING PLUS, i5 8600K, MSI GTX 1080 GamingX, 16 GB DDR4 3000MHz, 500 GB M2 SSD, 1 TB SSD

Posted

It seems the 2.0 version works perfect in 1.5.3

 

Thanks for the tip.

" You must think in russian.."

[sIGPIC][/sIGPIC]

 

Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´

 

Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4

Posted

Hi all,

 

I have updated all addons. Weapon sound is now working for ships and structures. The Oilrig has a little FPS update.

DCS Mods and Skins: HiDrive

Use the NAS only if the other Link is not working - it's slow!
My DCS MODs and Skins: NAS

Posted

Thanks Upuaut for your new work, please can you publish your Mod "Complete_upuaut_Mods" for DCS v1.5.3 Stable ?

A great thanks in advance, Skull.

  • 2 weeks later...
Posted
It´s because folder terrain changes location. Now it is in Mods/terrains/CaucasusBase/Structures/High/EDM (location, where EDM files of cargomod should be placed)

 

Does the LOD files go there also?

[sIGPIC][/sIGPIC]

Posted

Hi Upuaut, really great add to the world of DCS (like Ranger's mod). I've installed your complete pack but i can't find all of your tent & towers .....

 

where could i finc them ? really need a MASH texture ;)

[sIGPIC][/sIGPIC]

 

Intel I7-960 / 12Gb Corsair DDR3 Ram / Asus GTX980 Ti Strix / Asus PB287Q / TIR 5+Clip Pro Logitech G13/ TM Warthog N°01295 / Saitek Combat Rudder Pedals / Win Seven 64bits/ TM Cougar MFDs (Vers. 1) / 1 Syncmaster 206BW running Helios

Posted
I've installed your complete pack but i can't find all of your tent & towers .....

 

where could i finc them ? really need a MASH texture ;)

 

Hi beynesairforce,

 

you are right, the tents were missing. Download the "Complete_upuaut_Mods.exe" file, it's with the tents now.

DCS Mods and Skins: HiDrive

Use the NAS only if the other Link is not working - it's slow!
My DCS MODs and Skins: NAS

Posted

yeahhhhhhh thank you very much !!!! a lot of MB but very good

[sIGPIC][/sIGPIC]

 

Intel I7-960 / 12Gb Corsair DDR3 Ram / Asus GTX980 Ti Strix / Asus PB287Q / TIR 5+Clip Pro Logitech G13/ TM Warthog N°01295 / Saitek Combat Rudder Pedals / Win Seven 64bits/ TM Cougar MFDs (Vers. 1) / 1 Syncmaster 206BW running Helios

Posted

Upuaut a great thanks for your new "Complete_upuaut_Mods" it's really perfect now.

 

I would like to know if it's possible to have a second Mod with all your cargos elements but not for the Huey or Mi-8 sling load missions but just for add on the ground for a better rendering.

As the cargos communication menu is limited at few lines I would have one mod for the cargos (sling load) and the same mod but this time just for the rendering.

Do you know if it's possible ?

 

In advance a great thanks, Skull.

Posted

Hi Skulleader,

 

uncheck "can be cargo" in the ME cargo menu, then you can place as much cargo as you want and it will not be shown in the cargo menu of the heli (F6).

DCS Mods and Skins: HiDrive

Use the NAS only if the other Link is not working - it's slow!
My DCS MODs and Skins: NAS

Posted

Again this awesome mod isn´t compatible anymore with the new DCS 1.5.3 update.

 

Upuaut, if you could be so kind to take a look again i will really appreciate it.

" You must think in russian.."

[sIGPIC][/sIGPIC]

 

Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´

 

Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...