Jump to content

Recommended Posts

Posted

no wheel rumble felt A10 c

 

Hello,

 

I feel no wheel rumble or bumps during taxi with the A10C after the last update .

Touch down and everything else is stil felt and Oke.

 

Further more with the F5 the wheel rumble is present, but remains being felt after Take Off.

Also when parked before starting up. I can feel a slight bump every 2 seconds or so.

 

Does someone have the same experience.

 

Thanks allready

Posted
Hello,

 

I feel no wheel rumble or bumps during taxi with the A10C after the last update .

Touch down and everything else is stil felt and Oke.

 

Further more with the F5 the wheel rumble is present, but remains being felt after Take Off.

Also when parked before starting up. I can feel a slight bump every 2 seconds or so.

 

Does someone have the same experience.

 

Thanks allready

 

 

 

This might be the engine rumble effect. You can adjust the strength with the slider. I use just 30%...

 

Regarding the runway bumps with the A10, does anyone else have the same issue?

Posted

Thanks for the reply,

 

Regarding the F5,

For Troubleshoot I turned every effect to 0%, and then one by one i turned an effect to 80 %, the second try was with the " touch down and rwy bumps" effect.

This effect remained after TO !

 

Hope this info helps,

 

John

Posted

Thanks !

 

Hey Chief,

 

I just looked into your issue. You found a very old and strange bug. Thanks.

I already implemented a solution for this but Andre is on vacation for a few weeks. After this, we will publish the fix in the beta program. Are you a member of the beta team?

 

Bye

 

Appreciate you examining this . It is not a deal killer as it occurs as the very LAST thing in the shutdown process, so it doesn't have any effect otherwise. And I am not a member of the beta team.

Intel i5-4690K Devil's Canyon, GForce TitanX, ASUS Z-97A MB, 16GB GDDR3 GSkill mem, Samsung SSD X3,Track IR, TM Warthog, MFG Crosswind pedals, Acer XB280HK monitor,GAMETRIX KW-908 JETSEAT

Posted

Maybe a good source for WW II effects:

http://forums.eagle.ru/showpost.php?p=2865283&postcount=81

 

GunShudder.jpg

 

The P-51 had the biggest gun recoil, the P-40 a little less and the heavier P-47 the least of the three.

Would be nice to have this detail reflected in the SimShaker effects once all these modules are out. :)

System specs:

 

Gigabyte Aorus Master, i7 9700K@std, GTX 1080TI OC, 32 GB 3000 MHz RAM, NVMe M.2 SSD, Oculus Quest VR (2x1600x1440)

Warthog HOTAS w/150mm extension, Slaw pedals, Gametrix Jetseat, TrackIR for monitor use

 

Posted
@All: You can revert back to the previous stable version using the windows control center.

 

What for? It beta. She is intended for such experiments. For flights there is a release version of a shaker which works perfectly.

Posted
Maybe a good source for WW II effects:

http://forums.eagle.ru/showpost.php?p=2865283&postcount=81

 

GunShudder.jpg

 

The P-51 had the biggest gun recoil, the P-40 a little less and the heavier P-47 the least of the three.

Would be nice to have this detail reflected in the SimShaker effects once all these modules are out. :)

 

Thanks for the link.

Different gun effects are interesting. I'll put it on the list and will consider it during redesigning of some effects later this year...

Posted (edited)
What for? It beta. She is intended for such experiments. For flights there is a release version of a shaker which works perfectly.

 

Hmm strange, the last beta should be the same as the current stable.

I'm currently at work and can not test...

Edited by f4l0
Posted (edited)

Yes, precisely. It is simple while worked with a beta, I didn't update the release version. :)

Edited by tester
Posted

Just received my Jetseat and installed her. Fired up the Huey, and wow, now that's a hoot! Flying the 109, the AoA vibration is great too!

 

For all of the DCS modules, I'll need to figure out the ideal settings for the simshaker, to get the maximum effect.

 

In short, I'm glad I pulled the trigger! :thumbup:

MSI MAG Z790 Carbon, i9-13900k, NH-D15 cooler, 64 GB CL40 6000mhz RAM, MSI RTX4090, Yamaha 5.1 A/V Receiver, 4x 2TB Samsung 980 Pro NVMe, 1x 2TB Samsung 870 EVO SSD, Win 11 Pro, TM Warthog, Virpil WarBRD, MFG Crosswinds, 43" Samsung 4K TV, 21.5 Acer VT touchscreen, TrackIR, Varjo Aero, Wheel Stand Pro Super Warthog, Phanteks Enthoo Pro2 Full Tower Case, Seasonic GX-1200 ATX3 PSU, PointCTRL, Buttkicker 2, K-51 Helicopter Collective Control

Posted
Just received my Jetseat and installed her. Fired up the Huey, and wow, now that's a hoot! Flying the 109, the AoA vibration is great too!

 

For all of the DCS modules, I'll need to figure out the ideal settings for the simshaker, to get the maximum effect.

 

In short, I'm glad I pulled the trigger! :thumbup:

 

Great news Gregg!

Fly with pleasure :)

Gametrix JetSeats thread (in English) ,

SimShaker addon for bass-shakers thread (in English),

Andre's blog, downloads, manuals (in English).

 

 

[sIGPIC][/sIGPIC]

Posted

wheel rumble

 

Hello,

 

I feel no wheel rumble or bumps during taxi with the A10C after the last update .

Touch down and everything else is stil felt and Oke.

 

Further more with the F5 the wheel rumble is present, but remains being felt after Take Off.

Also when parked before starting up. I can feel a slight bump every 2 seconds or so.

 

Does someone have the same experience.

 

Thanks allready

 

I also am not getting anything when I taxi onto runway or on takeoff. everything else is OK.

Posted
I also am not getting anything when I taxi onto runway or on takeoff. everything else is OK.

 

Thank you for the feedback, Michael.

I suggest we'll publish an update soon to fix the issue. Depends on our beta testing group members activity.

Gametrix JetSeats thread (in English) ,

SimShaker addon for bass-shakers thread (in English),

Andre's blog, downloads, manuals (in English).

 

 

[sIGPIC][/sIGPIC]

Posted

I also am not getting anything when I taxi onto runway or on takeoff in the F-86 either ....or is it all aircraft ?

i7-9700K @ 5.0 l MSI MPG Z390 Gaming Plus MB l 32GB DDR4 2400 Ram l Sabrent Rocket Q 1TB M.2 l EVGA 3080 FTW l Win10 Pro l WarBRD/Warthog Hotas l VKB MkIV rudder Pedals l Reverb G2

Posted

Been looking at this for awhile, always thought it would be cool to have, but not essential.

 

Then I happened to try the"Buttocks vibration" feature in my friend's massage chair (why exactly is that a feature?!?!) and I could imagine the GAU-8 rumbling beneath my seat. It was then I knew I needed this jetseat in my life.

 

I'm wondering however about Support for Dirt Rally. I've seen some reference on this thread and one other forum on google about it, but I'd like to hear some official word on whether Dirt Rally is supported. If it is I'll be sure to buy one SOON!

Come fly with me, lets fly, lets fly away! -Sinatra

[sIGPIC][/sIGPIC]

My Specs: Lenovo Y50 with GTX 860m (2GB), i7 4700HQ 2.4GHz, 8GB Ram. Corsair K70(MX Blues are awesome!), Benq GW2760HS monitor, Steelseries V3 Prism headset, TM Warthog Hotas, Sidewinder FFB2 W/ FLCS grip, CH Pro pedals, TrackIR5, KW-908 Jetseat

Posted
Dirt Rally is supported in my 'SimShaker - Wheels' project.

'SimShaker - Wheels' is on it's beta stage yet, but works good.

You can get some more info about the project here

 

Sounds awesome, will place an order once I scrounge up the money. Based on that thread you linked I need to opt into the beta through messaging you, Andre?

Come fly with me, lets fly, lets fly away! -Sinatra

[sIGPIC][/sIGPIC]

My Specs: Lenovo Y50 with GTX 860m (2GB), i7 4700HQ 2.4GHz, 8GB Ram. Corsair K70(MX Blues are awesome!), Benq GW2760HS monitor, Steelseries V3 Prism headset, TM Warthog Hotas, Sidewinder FFB2 W/ FLCS grip, CH Pro pedals, TrackIR5, KW-908 Jetseat

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...