Scipiooo Posted February 27, 2021 Posted February 27, 2021 hi all, I have an issue with DCS updater utility. When i select SteamVR API, DCS is launching with the Oculus API instead. SteamVR API is ticked. someone has an idea ? Thx all, fly safe
SkateZilla Posted February 27, 2021 Author Posted February 27, 2021 Make Sure SteamVR is configured. I will double check this as well. I know some of my games when using steam VR launches Oculus and Steam Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
rstandi Posted February 27, 2021 Posted February 27, 2021 Hello, After the virtual desktop update this week, when I launch with the updater, DCS is a slide show... I notice Oculus is opening also. Not sure if this is due to the update or what is happening... I have the quest 2, and it was perfect on Tuesday... Now, I have to launch DCS through the virtual desktop app or it is unplayable. Very confusing... Rstandi
Osirith Posted February 28, 2021 Posted February 28, 2021 (edited) Hi all, I have a problem using presets : I would like to use 2 presets, one for standard screen (3440x1440), and the other for HP Reverb G2 VR (different graphic settings, using 1280x760 res to quickly see if I am on correct version). I have tried to "create" each preset by lanching the sim and specify 2 parameters inside DCS for each preset : in the 'Screen' version, I did choose "No VR" and "3440x1440" display, and in the "VR" version, I choose "VR" and 1280x760 display. However, whenever I choose one of the two presets in Updater and launch DCS, I am always returning to the latest settings I saved in the sim, so the two presets are always identical. What I am doing wrong ? PS: got it after some trials and errors. Not sure what I did right this time, but resetting and selecting saved games folder paths did the trick (I also launched Updater in Admin mode, not sure if needed). Edited February 28, 2021 by Osirith
SkateZilla Posted February 28, 2021 Author Posted February 28, 2021 (edited) 7 hours ago, Osirith said: Hi all, I have a problem using presets : I would like to use 2 presets, one for standard screen (3440x1440), and the other for HP Reverb G2 VR (different graphic settings, using 1280x760 res to quickly see if I am on correct version). I have tried to "create" each preset by lanching the sim and specify 2 parameters inside DCS for each preset : in the 'Screen' version, I did choose "No VR" and "3440x1440" display, and in the "VR" version, I choose "VR" and 1280x760 display. However, whenever I choose one of the two presets in Updater and launch DCS, I am always returning to the latest settings I saved in the sim, so the two presets are always identical. What I am doing wrong ? PS: got it after some trials and errors. Not sure what I did right this time, but resetting and selecting saved games folder paths did the trick (I also launched Updater in Admin mode, not sure if needed). The Updater App saves profiles in the /Saved Games Folders, so having it specified is required, as well as launching the Updater App at the same permission level you launch DCS. The Profiles are depreciated as DCS has built in custom graphics profiles now. Edited February 28, 2021 by SkateZilla Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
Scipiooo Posted February 28, 2021 Posted February 28, 2021 22 hours ago, SkateZilla said: Make Sure SteamVR is configured. I will double check this as well. I know some of my games when using steam VR launches Oculus and Steam My steam is okay ready to run with all other game but not DCs with your soft. Idk why ? Take your time, it's not urgent. Thx a lot fly safe
speed-of-heat Posted February 28, 2021 Posted February 28, 2021 if you run DCS from the desktop does it fire up in Steam or Oculus? SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat
Scipiooo Posted February 28, 2021 Posted February 28, 2021 5 minutes ago, speed-of-heat said: if you run DCS from the desktop does it fire up in Steam or Oculus? never try i'll check that and return
Scipiooo Posted February 28, 2021 Posted February 28, 2021 (edited) fired up from oculus 14 minutes ago, speed-of-heat said: if you run DCS from the desktop does it fire up in Steam or Oculus? from oculus Edited February 28, 2021 by Scipiooo
Scipiooo Posted February 28, 2021 Posted February 28, 2021 tried to import DCS on steam library and when i launch it, it launch oculus instead steamvr
SkateZilla Posted February 28, 2021 Author Posted February 28, 2021 as of right now, and the last time I checked a while ago, When Launching w/ SteamVR, on an Oculus Device, it will also Launch Oculus Software. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
harf4ng Posted March 4, 2021 Posted March 4, 2021 So is there a way to launch the standalone version of DCS through steam with an Oculus headset rather than with the Oculus API? Thanks Favorite modules : Huey, F-86F, F14 and P-51D Quest 2, RTX 3080, i7 10700K, 16 Gb of RAM, Pro Flight Trainer PUMA helicopter setup, Warthog HOTAS with two force sensitive stick, custom cockpit and a GS-Cobra dynamic seat.
DayGlow Posted March 6, 2021 Posted March 6, 2021 I've found that when DCS unfortruanly crashes the Updater utility shows DCS Process still running and I can't launch again without rebooting. Closing and openning the updater will always show a DCS process. Checking Task Manager there is no open DCS process If I hit end process in the updater I get an Unhandled Exception error with the attached details. If I run DCS again the updater shows 2 processes, but it runs fine. I just can't use the updater to launch until a reboot See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.ComponentModel.Win32Exception (0x80004005): Access is denied at System.Diagnostics.Process.Kill() at DCSUpdaterUtility.Form_Main.FORCE_CLOSE_DCSW() at DCSUpdaterUtility.Form_Main.Button_DCSW_CLOSE_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll ---------------------------------------- DCS Updater Utility Assembly Version: 1.1.0.1038 Win32 Version: 10.2.2020 CodeBase: file:///D:/games/DCS%20Updater%20Utility/DCS%20Updater%20Utility.exe ---------------------------------------- Microsoft.VisualBasic Assembly Version: 10.0.0.0 Win32 Version: 14.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll ---------------------------------------- System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 4.0.0.0 Win32 Version: 4.8.4300.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.8.4190.0 built by: NET48REL1LAST_B CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll ---------------------------------------- System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Runtime.Remoting Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll ---------------------------------------- Accessibility Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll ---------------------------------------- Newtonsoft.Json Assembly Version: 12.0.0.0 Win32 Version: 12.0.3.23909 CodeBase: file:///D:/games/DCS%20Updater%20Utility/Newtonsoft.Json.DLL ---------------------------------------- System.Numerics Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. "It takes a big man to admit he is wrong...I'm not a big man" Chevy Chase, Fletch Lives 5800X3D - 64gb ram - RTX3080 - Windows 11
SkateZilla Posted March 7, 2021 Author Posted March 7, 2021 11 hours ago, DayGlow said: I've found that when DCS unfortruanly crashes the Updater utility shows DCS Process still running and I can't launch again without rebooting. Closing and openning the updater will always show a DCS process. Checking Task Manager there is no open DCS process If I hit end process in the updater I get an Unhandled Exception error with the attached details. If I run DCS again the updater shows 2 processes, but it runs fine. I just can't use the updater to launch until a reboot See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.ComponentModel.Win32Exception (0x80004005): Access is denied at System.Diagnostics.Process.Kill() at DCSUpdaterUtility.Form_Main.FORCE_CLOSE_DCSW() at DCSUpdaterUtility.Form_Main.Button_DCSW_CLOSE_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll ---------------------------------------- DCS Updater Utility Assembly Version: 1.1.0.1038 Win32 Version: 10.2.2020 CodeBase: file:///D:/games/DCS%20Updater%20Utility/DCS%20Updater%20Utility.exe ---------------------------------------- Microsoft.VisualBasic Assembly Version: 10.0.0.0 Win32 Version: 14.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll ---------------------------------------- System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 4.0.0.0 Win32 Version: 4.8.4300.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.8.4190.0 built by: NET48REL1LAST_B CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll ---------------------------------------- System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Runtime.Remoting Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll ---------------------------------------- Accessibility Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll ---------------------------------------- Newtonsoft.Json Assembly Version: 12.0.0.0 Win32 Version: 12.0.3.23909 CodeBase: file:///D:/games/DCS%20Updater%20Utility/Newtonsoft.Json.DLL ---------------------------------------- System.Numerics Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. DCS Is in Fact still running, It's just not listed under your User Level in Task Manager. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
DayGlow Posted March 7, 2021 Posted March 7, 2021 7 hours ago, SkateZilla said: DCS Is in Fact still running, It's just not listed under your User Level in Task Manager. Is there anything I can do to kill it other than a reboot? "It takes a big man to admit he is wrong...I'm not a big man" Chevy Chase, Fletch Lives 5800X3D - 64gb ram - RTX3080 - Windows 11
speed-of-heat Posted March 7, 2021 Posted March 7, 2021 click on the end process box... SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat
DayGlow Posted March 7, 2021 Posted March 7, 2021 (edited) 2 hours ago, speed-of-heat said: click on the end process box... And I get the Unhandled Exception error I list above Edited March 7, 2021 by DayGlow "It takes a big man to admit he is wrong...I'm not a big man" Chevy Chase, Fletch Lives 5800X3D - 64gb ram - RTX3080 - Windows 11
SkateZilla Posted March 7, 2021 Author Posted March 7, 2021 Get task mgr to show processes for all users and admins. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
SkateZilla Posted March 28, 2021 Author Posted March 28, 2021 Just to update, Next Version will likely be after 2.7 is Released, The UI Shift and under the hood workings are still being re-done, it will condense a lot of code as well as space and graphics. Some Functions like the App Presets may very well be disabled since DCS has pre-sets built in now. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
speed-of-heat Posted March 28, 2021 Posted March 28, 2021 @SkateZilla, on the app presets, just a thought, whilst dcs does have them, many still rely on a game restart to apply effectively, where as your app enables those presets to be applied as the game is started ... which is much more convenient. would you be able to select which dcs preset you wanted from within your app so VR used preset N and 2d used preset X? Many thanks as always SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat
YSIAD_RIP Posted March 28, 2021 Posted March 28, 2021 @SkateZilla, the DCS Updater / Launcher GUI Utility is essential - I appreciate and look forward to the update. Last year I started adding more to DCS and found myself using the External Apps launcher to manually and or automatically launch utilities. I am now using C1, C2, C3, and C4. Will this feature still exist in the next version and will it be possible to have the icons adopt the default icon from the Windows EXE file? Cheers and Thanks! Do not own: | F-15E | JF-17 | Fw 190 A-8 | Bf 109 | Hardware: [ - Ryzen7-5800X - 32GB - RX 6800 - X56 HOTAS Throttle - WINWING Orion 2 F16EX Grip - TrackIR 5 - Tobii 5C - JetPad FSE - ]
SkateZilla Posted March 28, 2021 Author Posted March 28, 2021 (edited) On 3/28/2021 at 10:18 AM, YSIAD_RIP said: @SkateZilla, the DCS Updater / Launcher GUI Utility is essential - I appreciate and look forward to the update. Last year I started adding more to DCS and found myself using the External Apps launcher to manually and or automatically launch utilities. I am now using C1, C2, C3, and C4. Will this feature still exist in the next version and will it be possible to have the icons adopt the default icon from the Windows EXE file? Cheers and Thanks! It's on my to-do list, depends on viability of the code. External Apps was moved to the main window, so it's available 100% of the time Edit, this is Done and being tested hopefully makes it to next release, when user selects an exe for the C1-C5 slots it will automatically import the icon from exe. On 3/28/2021 at 2:56 AM, speed-of-heat said: @SkateZilla, on the app presets, just a thought, whilst dcs does have them, many still rely on a game restart to apply effectively, where as your app enables those presets to be applied as the game is started ... which is much more convenient. would you be able to select which dcs preset you wanted from within your app so VR used preset N and 2d used preset X? Many thanks as always Looking into that as well. Edited April 2, 2021 by SkateZilla 2 3 Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
59th_Punch Posted April 13, 2021 Posted April 13, 2021 (edited) Any help here would be appreciated, DCS runs f2021-04-13 13:42:53.236 ALERT SECURITYCONTROL: Failed to parse root_manifest! 2021-04-13 13:42:53.236 WARNING SECURITYCONTROL: IC fail: dcs_manifest.bin 2021-04-13 13:42:53.237 INFO DCS: Command line: "C:\Program Files\Eagle Dynamics\DCS World OpenBeta\bin\DCS.exe" 2021-04-13 13:42:53.237 INFO DCS: DCS/2.5.6.61527 (x86_64; Windows NT 10.0.19042) 2021-04-13 13:42:53.237 INFO DCS: DCS revision: 181514 2021-04-13 13:42:53.237 INFO DCS: Renderer revision: 21314 2021-04-13 13:42:53.237 INFO DCS: Terrain revision: 21287 2021-04-13 13:42:53.237 INFO DCS: CPU cores: 8, threads: 16, System RAM: 16276 MB, Pagefile: 27648 MB === Log closed.ine from desktop icon, tried many things with no results...dcs.log Edited April 13, 2021 by 59th_Punch
Rick50 Posted April 14, 2021 Posted April 14, 2021 The 2.7 patch notes includes a line worth looking at, not sure what it means though: Quote DCS_Updater: Only allow to install authorized modules. Does this mean anything regarding mods? Meaning, won't allow Mod projects? Or am I not understanding this, and it doesn't affect mods present and future???
Brainfreeze Posted April 14, 2021 Posted April 14, 2021 Seems talking about the updater so would be about DCS modules, not mods i9 14900K / 64GB / RTX 4090 / Varjo Aero / Winwing Orion2 + F15EX / Virpil Wrbrd + Alpha Stick + ACE pedals
Recommended Posts