DArt Posted January 20, 2019 Author Share Posted January 20, 2019 Hey Labels do not change their value on a regular basis. These values are refreshed only after hovering over them. Version 1.2.0-beta1. This makes work very difficult. Greetings Affirmative, I have fixed and will be available for next release (this week I hope) Thanks for feedback! [ https://www.lotatc.com ] Link to comment Share on other sites More sharing options...
hancerPL Posted January 20, 2019 Share Posted January 20, 2019 One more thing, I do not like the change. Now I have to fly my eyes all over the screen to see the data. Better as they were at the end of the line or in half of this line, without covering the objects. Specialization A-10C https://vbw304.pl/ Link to comment Share on other sites More sharing options...
DArt Posted January 20, 2019 Author Share Posted January 20, 2019 Copy, you can restore old behaviour in the map dock > options > Show measure line value on bottom of the window ! :) I put it as default setting, but I will certainly restore old behaviour as default setting in final version. Again, thx for your feedback! [ https://www.lotatc.com ] Link to comment Share on other sites More sharing options...
Zyll Posted January 21, 2019 Share Posted January 21, 2019 Hey Dart, loving using LotATC on our TAW servers. Two comments, the setting for showing BRAA on the line itself does not save after disconnecting and closing the app, which means each time I need to reenable this setting. Also dock window positions may be remembered, but their sizes all return to a default size after closing the app. What this means is there's a degree of tweaking the UI the same way every time I start up, which shouldn't be necessary. This is on the release version. Thanks in advance for your attention. Link to comment Share on other sites More sharing options...
DArt Posted January 21, 2019 Author Share Posted January 21, 2019 Hey Dart, loving using LotATC on our TAW servers. Two comments, the setting for showing BRAA on the line itself does not save after disconnecting and closing the app, which means each time I need to reenable this setting. Also dock window positions may be remembered, but their sizes all return to a default size after closing the app. What this means is there's a degree of tweaking the UI the same way every time I start up, which shouldn't be necessary. This is on the release version. Thanks in advance for your attention. For the BRAA settings it is done on the current beta, it is saved between session. I will fix the dock size also for the 1.2.0 final :) Thx! [ https://www.lotatc.com ] Link to comment Share on other sites More sharing options...
antonkr Posted January 30, 2019 Share Posted January 30, 2019 I am sure this was asked before, but I cannot find it. Is there any way for units to display their second number (ie Uzi 2-2 showing up instead of just Uzi-2)? If not, is there plans on fixing that? Thank you :) Link to comment Share on other sites More sharing options...
DArt Posted January 31, 2019 Author Share Posted January 31, 2019 I am sure this was asked before, but I cannot find it. Is there any way for units to display their second number (ie Uzi 2-2 showing up instead of just Uzi-2)? If not, is there plans on fixing that? Thank you :) Currently no, but you are right it is plan for near future release :) [ https://www.lotatc.com ] Link to comment Share on other sites More sharing options...
Zyll Posted February 3, 2019 Share Posted February 3, 2019 After updating config.lua on the server, how do you make the change take effect? Do you need to restart the DCS mission? Link to comment Share on other sites More sharing options...
DArt Posted February 3, 2019 Author Share Posted February 3, 2019 Yes for config.lua changes, a full DCS restart (not only the mission) is needed at this time, I plan to make it more dynamic in future for 24/7 servers. [ https://www.lotatc.com ] Link to comment Share on other sites More sharing options...
Zyll Posted February 5, 2019 Share Posted February 5, 2019 Could I request the ability to change the color of the LOTATC chat messages? Feedback is that the default white gets lost among the regular chat window background "noise". Link to comment Share on other sites More sharing options...
DArt Posted February 6, 2019 Author Share Posted February 6, 2019 Could I request the ability to change the color of the LOTATC chat messages? Feedback is that the default white gets lost among the regular chat window background "noise". Copy, I will add that ;) [ https://www.lotatc.com ] Link to comment Share on other sites More sharing options...
Zyll Posted February 7, 2019 Share Posted February 7, 2019 Copy, I will add that ;) Link to comment Share on other sites More sharing options...
Zyll Posted February 10, 2019 Share Posted February 10, 2019 can we also allow the BRAA window text area to dynamically shrink smaller, as low as one line of text? Right now, you are forced to keep this window at a minimum height (like 15 rows of text) otherwise the "Delete Selected" and "Delete All" buttons fall off below the fold. This causes the BRAA window to use up more screen real estate than it needs. Alternatively, remove the buttons altogether and allow keypress "Delete" to remove rows. That seems more efficient. Link to comment Share on other sites More sharing options...
DArt Posted February 11, 2019 Author Share Posted February 11, 2019 can we also allow the BRAA window text area to dynamically shrink smaller, as low as one line of text? Right now, you are forced to keep this window at a minimum height (like 15 rows of text) otherwise the "Delete Selected" and "Delete All" buttons fall off below the fold. This causes the BRAA window to use up more screen real estate than it needs. Alternatively, remove the buttons altogether and allow keypress "Delete" to remove rows. That seems more efficient. :thumbup: [ https://www.lotatc.com ] Link to comment Share on other sites More sharing options...
Alpenwolf Posted February 11, 2019 Share Posted February 11, 2019 I've just added this mod to my server. Thanks for this awesome tool :thumbup: Cold War 1947 - 1991 Discord Helicopters Tournaments Combined Arms Tournaments You can help me with keeping up the server via PayPal donations: hokumyounis@yahoo.com Link to comment Share on other sites More sharing options...
Zyll Posted February 16, 2019 Share Posted February 16, 2019 Dart, when patching the server from release version to RC (or upgrading in general), do we just run the installer over top of the old install, or do we need to uninstall/reinstall? Will previous server settings, including server-side licences be retained? thx. Link to comment Share on other sites More sharing options...
DArt Posted February 17, 2019 Author Share Posted February 17, 2019 Dart, when patching the server from release version to RC (or upgrading in general), do we just run the installer over top of the old install, or do we need to uninstall/reinstall? Will previous server settings, including server-side licences be retained? thx. No you can upgrade directly both server and client. For server, it is a good thing to go to DCS > Options > Special > LotAtc after upgrading and verify that options are correct especially with current 1.2.0-rc1 because options have changed (new profile system). Of course, license will be retained and works directly. :thumbup: [ https://www.lotatc.com ] Link to comment Share on other sites More sharing options...
Zyll Posted February 17, 2019 Share Posted February 17, 2019 Cool thx. Might be a good sentence to put in your FAQ section :) Link to comment Share on other sites More sharing options...
Paladin1cd Posted February 17, 2019 Share Posted February 17, 2019 Hello, I have a crazy question I haven't found an answer for anywhere. I was using my ipad as a second display and moved the BRAA window to it from LOTATC... And it disappeared. I have changed resolutions, disconnected the ipad, everything but I can't get it back. Any ideas on how to get it to display back where it came from? Link to comment Share on other sites More sharing options...
DArt Posted February 18, 2019 Author Share Posted February 18, 2019 Cool thx. Might be a good sentence to put in your FAQ section :) Good remarks! I will! Hello, I have a crazy question I haven't found an answer for anywhere. I was using my ipad as a second display and moved the BRAA window to it from LOTATC... And it disappeared. I have changed resolutions, disconnected the ipad, everything but I can't get it back. Any ideas on how to get it to display back where it came from? It happens with 1.1.2 (and should be fixed with 1.2.0). Open LotAtc client, go inOptions > General > Restore default dock and windows position > Click to reset then restart the applications, it will reset only docks, window position and size. It should fix your problem, sorry for that! [ https://www.lotatc.com ] Link to comment Share on other sites More sharing options...
AKA_Clutter Posted February 24, 2019 Share Posted February 24, 2019 Having just acquired LotAtc4DCS, and having NOT read the previous 36 pages (or the manual) is there a list of common DCS servers that allow the use of LotAtc? ---------------- AKA_Clutter Win 10 Pro, Intel i7 8700k @4.6 GHz, EVGA RTX 3080 FTW, Ultra 64 GB G.Skill DDR4 3600 RAM, Acer 27" flat screen, Oculus Rift S, HP Reverb G2, CH Fighterstick, Pro Throttle and Pro Rudder Pedals HOTAS, TM Warthog HOTAS, MFG Rudder Pedals, TrackIR 5 Pro w/Vector Expansion, PointCTRL. Link to comment Share on other sites More sharing options...
Shadoga Posted February 24, 2019 Share Posted February 24, 2019 I don't know of a list, I usually check the mission descriptions in the DCS server lobby. Check 104th, DDCS, 1st Fighters, Cold War, for example. But, there's a big BUT: For public DCS multiplayer servers it is somewhat problematic to allow access to a co-running LotAtc-server.exe because it would be easy for client pilots to simultaneously run the LotAtc-client and thus cheat. Therefore, public server providers have come up with rules, restricted access and additional precautions for the use of LotAtc. Amongst those precautions might be: - restricting access by LotAtc clients to only pre-registered players - forcing LotAtc client players to be online and thus reachable & controllable through Teamspeak and/or Discord - enforcing and supervising that players connected as LotAtc clients are not allowed to connect to the server in DCS at the same time. Cheating by use of LotAtc can be a problem and is impossible to prevent through in-game settings of DCS and LotAtc alone. Link to comment Share on other sites More sharing options...
Jeepyb Posted March 1, 2019 Share Posted March 1, 2019 Any words on integration with the dedicated server ? [sIGPIC][/sIGPIC] Callsign: BUNZ https://www.5vwing.com/ Link to comment Share on other sites More sharing options...
DArt Posted March 1, 2019 Author Share Posted March 1, 2019 As I have not access to the test version (perhaps one day...), I get the modifications only today, it seems that there is some troubles with the dedicated version, I will analyse and fix that ASAP. Be sure it is my first priority for next days :) [ https://www.lotatc.com ] Link to comment Share on other sites More sharing options...
DArt Posted March 4, 2019 Author Share Posted March 4, 2019 LotAtc 1.2.0 is finally stable now! Check here for a complete (and very long changelog): https://www.lotatc.com/website/2019/03/04/1.2.0-available.html Not compatible with 1.1.2, client and server should run the same version For dedicated server, LotAtc seems to run well. Note that on multiple instances, you have to copy ( or use the OVGME package of LotAtc server) Mods/tech/LotAtc and Mods/Scripts/LotAtcGameGui.lua for each Saved Games of each instance! [ https://www.lotatc.com ] Link to comment Share on other sites More sharing options...
Recommended Posts