MilesD Posted March 21, 2019 Author Posted March 21, 2019 Can't see why not. Expected to work with 2D configs as well. Thanks for continued responsiveness to the community Miles. I agree Chic, From what I gathered it should work fine. I will be moving on to development for 2D monitors once VR production is going smooth. The production stencil and another 1600 PCBS are almost done. Now shipping up to website Pre-Order Form date 2022/11/15 Pre-Order Form Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/
Gman109 Posted March 21, 2019 Posted March 21, 2019 Please add me to the list. How did I miss this? Primary DCS System: AMD 9800x3d, MSI Tomahawk 870, 6TB m.2s (2x2t, 1x2tb), MSI Ventus 5080, Seasonic 1200 PSU, 64GB Gskill 6000mhz CL30. 32" Asus 4K OLED 240hz, 49"MSI OLDED Secondary System : 14600KF, z790 Tomahawk, 32GB Gskill 6000mhz CL32, Asus 4090, 2x2TB m.2. VR: Quest 3 for now. Virpil T50x2,T50CM2x2,Warbrd x2, VFX/Delta/Flankr/CM2/Alpha/Tm Hornet sticks, VKB GF3, Tm Warthog(many), Modded Cougar, VKB Pedals/MFG Pedals/Slaw Viper RX+109Cam Pedals/Virpil Pedals x2, Virpil T50+T50CM2+T50+T50CM3+VMAX Throttles/CH Fightersticksx2/CH Throttlesx2/CH peds, Quest 3. Virpil Rotor TCS Plus. All virpil grips, TM Grips, working on VKB GF Grips.
FireCat Posted March 21, 2019 Posted March 21, 2019 Please add me to the list. How did I miss this? You have been added. Tab 53 post 528 Cheers Firecat.
Himmselbuster Posted March 21, 2019 Posted March 21, 2019 You have been added. Tab 53 post 528 Cheers Firecat. Please add me to the list too. Thank you! :smilewink: [sIGPIC][/sIGPIC]
Deano87 Posted March 21, 2019 Posted March 21, 2019 Every time I fly the F-14 I think about what it'll be like with PointCTRL and I pull this face: Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again.
FireCat Posted March 21, 2019 Posted March 21, 2019 Please add me to the list too. Thank you! :smilewink: You are already on the list Himmselbuster. Tab 53 post 528 127 Himmselbuster Cheers Firecat.
DutchCoolHand Posted March 21, 2019 Posted March 21, 2019 Every time I fly the F-14 I think about what it'll be like with PointCTRL and I pull this face: same here, I think it is a close as clicking the switches for real. I have a lot of functions now setup with Viacom but it is not the same. I love the F14 with all the switches in the RIO cockpit AMD RYZEN 7 2700 / 32GB / RTX2070 / 500GB M.2 with Windows and DCS / 2 - 500GB SSD / Rift S/ TM Warthog with F18 stick and Virpil WarBRD / Foxx Mounts/ MFG Crosswind rudders + 3 MFD's | Now enjoying VR with PointCTRL controllers + Gamematrix JetSeat
2alpha-down0 Posted March 23, 2019 Posted March 23, 2019 Been following this project for a while. Please put me on the list. Sent from my iPhone using Tapatalk Early Cold War Servers https://discord.gg/VGC7JxJWDS
FireCat Posted March 23, 2019 Posted March 23, 2019 Been following this project for a while. Please put me on the list. Sent from my iPhone using Tapatalk You have been added. Tab 53 post 528 Cheers Firecat.
FireCat Posted March 23, 2019 Posted March 23, 2019 Great work Miles. Please add me to the list. You have been added. Tab 53 post 528 Cheers.
Andre92 Posted March 23, 2019 Posted March 23, 2019 Great work! Please add me to the waiting list. Thank you! André
FireCat Posted March 23, 2019 Posted March 23, 2019 Great work! Please add me to the waiting list. Thank you! André You have been added. Tab 53 post 528 Cheers.
farmertom Posted March 23, 2019 Posted March 23, 2019 Excited to use this:D Any guess on an ETA? Thanks :thumbup:
MilesD Posted March 23, 2019 Author Posted March 23, 2019 (edited) Excited to use this:D Any guess on an ETA? Thanks :thumbup: Hey Farmer Tom, I think you have been here from the beginning. Solder paste stencil for re-flow, and more production boards are almost complete. See last board processing below. I believe the last item in quantity I am waiting for is the Lipo safe bags for FCU shipment, storage, and charging. I know a lot of you are anxious to try out PointCTRL and please know I am at this full time, its not something I am doing on the side. I really just want it to go out right. About a month ago I thought "two weeks", but I must have messed up the order for the stencil, so here we are delayed. I can say we are very close, and I have a room full of components. Thanks for your patience, and I hope it will be worth your wait. Miles Edited March 23, 2019 by MilesD Now shipping up to website Pre-Order Form date 2022/11/15 Pre-Order Form Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/
Ratcatcher Posted March 23, 2019 Posted March 23, 2019 I know a lot of you are anxious to try out PointCTRL and please know I am at this full time, its not something I am doing on the side. I really just want it to go out right. Miles Slow is smooth, smooth is fast. Looking forward to trying this out, when the time is right! Techlabs Chameleon Watercooled Gaming PC - Intel Core i7 6700K @ 4.7GHz : Samsung 950 Pro 256GB SSD, Samsung 500 gig SSD, Seagate 1TB 7200RPM Drive : MSI GeForce GTX 1080 "Founders Edition" 8192MB : 800W '80 Plus Gold' Modular Power Supply : 32GB (2x16GB) DDR4 PC4-25600C16 3200MHz : Occulus Rift S : TM Warthog : MFG Crosswind V2 : Win 10 64. PointCTRL.
FireCat Posted March 24, 2019 Posted March 24, 2019 Pimax pics Hi MilesD, will pics of this type do? I tried different ways to show the dimensions laying a ruler, set square etc but in truth even with the camera zoomed in and held from a distance I could not get visible measurements to line up and show accurately in the pictures. The 2 profiles shown side and top-down view give the dimensions of the area I presume you will need for the mounting if you need more I will get some graph paper and give it a try as you suggested. As you can see the finish quality of the Pimax leaves a bit to be desired this is a problem Pimax is supposed to have addressed, it makes taking angles and dimensions tricky, to say the least, as there are ridges where the case seams should join flush, so I suggest to work to +/- 1mm and the same with the angles +/- 1-2 degrees. If you need more let me know. Regards Firecat.pimax.zip
MilesD Posted March 24, 2019 Author Posted March 24, 2019 The 2 profiles shown side and top-down view give the dimensions of the area I presume you will need for the mounting if you need more I will get some graph paper and give it a try as you suggested. If you need more let me know. Regards Firecat. Wow, Thank you so much Firecat. What you did is perfect. No need for anything else. If you have the time, After I make the 3D model I would like to send you a PDF with 3 views and cutaways that you can cut out and test fit to check if we are close. Actually, I will post in forum for feed back from anyone. I cant seem to find good dimensions, 3 view drawings, or 3d models of the oddesy. If anyone has the oddesy or any other HMD they would like an HMS mount for, just send me some pics like Firecat did. You dont have to worry about measuring the angles, I will overlay the pic in the 3d design environment. The pictures should be taken as far away as possible while zoomed in to reduce perspective distortion. The views should be square to the HMD like a 3 view drawing, and the area of interest should be in the center of the pic. Thanks again Firecat, this is a big help. Thanks, Miles Now shipping up to website Pre-Order Form date 2022/11/15 Pre-Order Form Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/
MilesD Posted March 24, 2019 Author Posted March 24, 2019 Slow is smooth, smooth is fast. Spoken like a true tactical pistol instructor.....? Now shipping up to website Pre-Order Form date 2022/11/15 Pre-Order Form Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/
Ratcatcher Posted March 24, 2019 Posted March 24, 2019 (edited) Spoken like a true tactical pistol instructor.....? Ha ha, nice try! No I read it in a book once...honest! :book: ... but to be fair it was a book about... :gun_rifle: Edited March 24, 2019 by Ratcatcher Techlabs Chameleon Watercooled Gaming PC - Intel Core i7 6700K @ 4.7GHz : Samsung 950 Pro 256GB SSD, Samsung 500 gig SSD, Seagate 1TB 7200RPM Drive : MSI GeForce GTX 1080 "Founders Edition" 8192MB : 800W '80 Plus Gold' Modular Power Supply : 32GB (2x16GB) DDR4 PC4-25600C16 3200MHz : Occulus Rift S : TM Warthog : MFG Crosswind V2 : Win 10 64. PointCTRL.
DutchCoolHand Posted March 24, 2019 Posted March 24, 2019 Wow, Thank you so much Firecat. What you did is perfect. No need for anything else. If you have the time, After I make the 3D model I would like to send you a PDF with 3 views and cutaways that you can cut out and test fit to check if we are close. Actually, I will post in forum for feed back from anyone. I cant seem to find good dimensions, 3 view drawings, or 3d models of the oddesy. If anyone has the oddesy or any other HMD they would like an HMS mount for, just send me some pics like Firecat did. You dont have to worry about measuring the angles, I will overlay the pic in the 3d design environment. The pictures should be taken as far away as possible while zoomed in to reduce perspective distortion. The views should be square to the HMD like a 3 view drawing, and the area of interest should be in the center of the pic. Thanks again Firecat, this is a big help. Thanks, Miles I will send pictures soon Miles for the Odyssey+ Peter AMD RYZEN 7 2700 / 32GB / RTX2070 / 500GB M.2 with Windows and DCS / 2 - 500GB SSD / Rift S/ TM Warthog with F18 stick and Virpil WarBRD / Foxx Mounts/ MFG Crosswind rudders + 3 MFD's | Now enjoying VR with PointCTRL controllers + Gamematrix JetSeat
Harlikwin Posted March 24, 2019 Posted March 24, 2019 Spoken like a true tactical pistol instructor.....? You're not wrong ;) New hotness: I7 9700k 4.8ghz, 32gb ddr4, 2080ti, :joystick: TM Warthog. TrackIR, HP Reverb (formermly CV1) Old-N-busted: i7 4720HQ ~3.5GHZ, +32GB DDR3 + Nvidia GTX980m (4GB VRAM) :joystick: TM Warthog. TrackIR, Rift CV1 (yes really).
FireCat Posted March 24, 2019 Posted March 24, 2019 Wow, Thank you so much Firecat. What you did is perfect. No need for anything else. If you have the time, After I make the 3D model I would like to send you a PDF with 3 views and cutaways that you can cut out and test fit to check if we are close. Actually, I will post in forum for feed back from anyone. Thanks again Firecat, this is a big help. Thanks, Miles Glad to be of help Miles, when you have the cutaways I will test them for you to ensure they fit correctly. Great work Sir. Please add me to the list. You have been added. Tab 53 post 528 Cheers Firecat.
Harlikwin Posted March 24, 2019 Posted March 24, 2019 @MilesD Any thoughts on this working with the new HP Reverb HMD? https://www8.hp.com/us/en/workstations/mixed-reality-headset/index.html It looks rift-ish... So I'm guessing it should be fine, I just don't know if your IR tracking is gonna mess with the cameras. New hotness: I7 9700k 4.8ghz, 32gb ddr4, 2080ti, :joystick: TM Warthog. TrackIR, HP Reverb (formermly CV1) Old-N-busted: i7 4720HQ ~3.5GHZ, +32GB DDR3 + Nvidia GTX980m (4GB VRAM) :joystick: TM Warthog. TrackIR, Rift CV1 (yes really).
Recommended Posts