beppe_goodoldrebel Posted December 9, 2018 Share Posted December 9, 2018 (edited) Red Flag Training Missions - F/A-18C DOWNLOAD: http://www.digitalcombatsimulator.com/en/files/3302808/ A series of advanced training missions based on Red Flag ranges and rules. Features: - custom ATC with working ATIS - custom Voice Overs - populated airbases - simulated Red Flag rules - custom Misson Data Card on built-in kneeboard Missions: Day 0 - Welcome to Nellis! Enjoy the dusk and land with AWACS Magic 1-1 Day 1 - NTTR Familiarization and daylight formation flying Follow Springfield 1-1 over NTTR airspace , train formation flying Day 1 - Night formation flying Escort tanker during night time until bingo fuel or scheduled guests are done refueling Day 2 - AAR and BFM training Try air refueling and then engage Springfield 1 over FEBA guns only! Day 2 - ACM Training Engage Aggressors F-16C over FEBA with Sidewinders Day 2 - ACM Training AGGRESSOR Your turn as an Aggressor! Engage Blue F-15E over FEBA with Sidewinders, no Tanker or AWACS support this time! Day 2 - BVR Training Engage Aggressors F-15C over FEBA with AIM-7s ( will add AIM-120s once LTWS is implemented) Day 3 - Air-Ground Range Training Train your ground pounding skills against simulated Red tanks with M151 Rockets and Mk82s over Range 62. FAC Bravo 1 will call hits! Day 3 - Pop-up Attack Training Try the Pop-up Attack maneuver on a pre-planned target. Use terrain masking to approch the target and avoid the defending SA-6 and AAA. FAC Bravo 1 will call hit. Once pickle go defensive and avoid SAM launch. -Day 3 - JTAC Training Contact JTAC Axeman for support Bravo planned attack on a Red Logistic Outpost defended by tanks , AAA and an SA-2. Day 3 - Sead Training Support Uzi1 and Enfield 1 for a surprise attack on Red Forces. Test yourself in your first package mission! ...many more mission to come!!! Day 4 - A day over FEBA ( long lasting live fire mission against Red Forces ) Custom ATC is divided in steps where you simply pass through them by pressing SPACE everytime you got message to do it. after startup -> Grab ATIS and contact Ground Control hold short runway 3R -> contact Tower after takeoff -> contact Departure when you arrive at the last waypoint -> Grab ATIS and select the right information in the F10 menu to contact Approach around 5nm to Nellis AFB -> contact Tower After landing -> contact Ground for parking Emergency ->this will show up after departure clearance, you can select it anytime with F10 menu , if you are in trouble Nellis ATC will let you land immediately, firetrucks will wait you at the end of the runway. How Custom ATC works: Emergency landing: NOTES: - there COULD be some bugs on ATC voice overs (mostly VOs cutting each others or missing) , please report if any. I've tried all the missions as much as I could , if there are some bugs please report. Edited April 7, 2019 by beppe_goodoldrebel 1 Link to comment Share on other sites More sharing options...
Rudel_chw Posted December 9, 2018 Share Posted December 9, 2018 Thanks a lot for sharing, will give them a try :) For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra For Gaming: 34" Monitor - Ryzen 3600 - 32 GB DDR4 2400 - nVidia RTX2080 - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar Mobile: iPad Pro 12.9" of 256 GB Link to comment Share on other sites More sharing options...
oscar19681 Posted December 10, 2018 Share Posted December 10, 2018 Awesome, ill give these a try tomorrow! [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted December 12, 2018 Author Share Posted December 12, 2018 I'll release the "Pop Up Attack training" mission this weekend. I'm still doing this "training campaign" with the F14 in mind. So , when the Turkey will be released, I can just change the aircraft and move back all the assetts to the 80's-90's :-) I'm studying :) Link to comment Share on other sites More sharing options...
Ala12Rv-Tundra Posted December 12, 2018 Share Posted December 12, 2018 Interesting. Quite :) i5 8400 | 32 Gb RAM | RTX 2080Ti | Virpil Mongoose T-50 base w/ Warthog & Hornet sticks | Warthog throttle | Cougar throttle USB | VKB T-Rudder Mk IV | Oculus Rift S | Buddy-Fox A-10 UFC | 3x TM MFDs | Buttkicker | SIMple SIMpit chair | WinWing TakeOff panel | Andre JetSeat | Winwing Hornet UFC | Winwing Viper ICP FC3 - Warthog - F-5E - Harrier - NTTR - Hornet - Tomcat - Huey - Viper - C-101 - PG - Hip - SuperCarrier - Syria - Warthog II - Hind - South Atlantic - Sinai - Strike Eagle - Phantom Link to comment Share on other sites More sharing options...
Max_Rogue Posted December 13, 2018 Share Posted December 13, 2018 Just flew the first mission, loved the ending music. Tomorrow, I'll do Day 1. Thanks for making this! [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Sting57 Posted December 13, 2018 Share Posted December 13, 2018 These look awesome. Will i be able to use them in mp? Sent from my SM-T530 using Tapatalk Win11 64bit, AMD Ryzen 58003DX, GeForce 3070 8GB, 2TB SSD, 64GB DDR4 RAM at 3200MHz _ full 1:1 FA-18C Cockpit https://www.youtube.com/@TheHornetProject Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted December 13, 2018 Author Share Posted December 13, 2018 These look awesome. Will i be able to use them in mp? Sent from my SM-T530 using Tapatalk As for now no. I was thinking about making a coop version but for doing this I think I have to remove all the custom ATC. This is something I'll do once all the missions are done. Link to comment Share on other sites More sharing options...
Backy 51 Posted December 14, 2018 Share Posted December 14, 2018 (edited) Thought you might enjoy this during your research: or https://www.youtube.com/watch?v=qgBE0Egcqvk Edited December 14, 2018 by Backy 51 I don't need no stinkin' GPS! (except for PGMs :D) [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted December 16, 2018 Author Share Posted December 16, 2018 New version available! ADDED: Day 3 - Pop-up Attack Training Try the Pop-up Attack maneuver on a pre-planned target. Use terrain masking to approch the target and avoid the defending SA-6 and AAA. FAC Bravo 1 will call hit. Once pickle go defensive and avoid SAM launch. UPDATE: Day 0 - Welcome to Nellis! ADDED soundtrack music at the beginning ATC messages FIXED something here and there BFM, ACM , BVR missions FIXED some trigger errors Link to comment Share on other sites More sharing options...
Max_Rogue Posted December 17, 2018 Share Posted December 17, 2018 I'll have to download this again. I've flown the first couple missions, and the instructions weren't super clear on the sequence of things. Example, the night escort mission. I had no idea that Texaco was already airborne, 60-ish NM to the North. The message just told me to contact ATC when I was done with start-up, but there was nothing different after I let ATC know I was taking off. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted December 17, 2018 Author Share Posted December 17, 2018 (edited) Example, the night escort mission. I had no idea that Texaco was already airborne, 60-ish NM to the North. The message just told me to contact ATC when I was done with start-up, but there was nothing different after I let ATC know I was taking off. I think you miss how custom ATC works, maybe it's just my fault I did not explain how to deal with it. Custom ATC is divided in steps and you simply pass through them by pressing SPACE everytime you got message to do it. after startup -> grab ATIS and contact Ground Control hold short runway 3R -> contact Tower after takeoff -> contact departure when you arrive at the last waypoint -> grab ATIS and select the right information in the F10 menu to contact Approach around 5nm to Nellis AFB -> contact Tower After landing -> contact Ground for parking If you ever played Baltic_dragon's M2000C Red Flag campaign the system is almost the same, i just made it a little simplier. Beside this , I'm working on custom kneeboard panels and a Mission Data Card that can guide you through every waypoint. P.S. on that Night Formation mission , when you arrive at steerpoint 2 , just use AA Tacan 26Y , you will find Texaco on your HSI. Edited December 17, 2018 by beppe_goodoldrebel Link to comment Share on other sites More sharing options...
mr_mojo97 Posted December 17, 2018 Share Posted December 17, 2018 Seems like you've made a lot of effort here, well done. I'll certainly be flying this Red Flag. Regarding the comms, can I not use Vaicom/ VA for this? I've tried but I never get any responses from ATC. With Vaicom in VR it's a bit of an immersion killer having to press space and seeing the text. MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA | Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted December 17, 2018 Author Share Posted December 17, 2018 Seems like you've made a lot of effort here, well done. I'll certainly be flying this Red Flag. Regarding the comms, can I not use Vaicom/ VA for this? I've tried but I never get any responses from ATC. With Vaicom in VR it's a bit of an immersion killer having to press space and seeing the text. I dont use VA but...I guess if you create a command in VA where it result in pressing Spacebar maybe it will work? Link to comment Share on other sites More sharing options...
mr_mojo97 Posted December 17, 2018 Share Posted December 17, 2018 'Spose I should have thought about that!! I'll give it a whirl. Cheers MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA | Link to comment Share on other sites More sharing options...
mr_mojo97 Posted December 17, 2018 Share Posted December 17, 2018 Sorry to bother you again. Mission 1 - I get the message to contact ATC within 5Nm but only get this message after I pass the runway threshold. Am I missing something here? MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA | Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted December 17, 2018 Author Share Posted December 17, 2018 Sorry to bother you again. Mission 1 - I get the message to contact ATC within 5Nm but only get this message after I pass the runway threshold. Am I missing something here? You have been instructed by Magic 1-1 to orbit until his landing. When he lands you are enabled to contact tower. Link to comment Share on other sites More sharing options...
Max_Rogue Posted December 17, 2018 Share Posted December 17, 2018 I think you miss how custom ATC works, maybe it's just my fault I did not explain how to deal with it. Custom ATC is divided in steps and you simply pass through them by pressing SPACE everytime you got message to do it. after startup -> grab ATIS and contact Ground Control hold short runway 3R -> contact Tower after takeoff -> contact departure when you arrive at the last waypoint -> grab ATIS and select the right information in the F10 menu to contact Approach around 5nm to Nellis AFB -> contact Tower After landing -> contact Ground for parking If you ever played Baltic_dragon's M2000C Red Flag campaign the system is almost the same, i just made it a little simplier. Beside this , I'm working on custom kneeboard panels and a Mission Data Card that can guide you through every waypoint. P.S. on that Night Formation mission , when you arrive at steerpoint 2 , just use AA Tacan 26Y , you will find Texaco on your HSI. I've been playing for 3 years now, and I've never done any of the campaigns. I usually fly my own, self-made SP missions. Your campaign is actually the first I've attempted. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted December 17, 2018 Author Share Posted December 17, 2018 I've been playing for 3 years now, and I've never done any of the campaigns. I usually fly my own, self-made SP missions. Your campaign is actually the first I've attempted. I feel honored :megalol: Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted December 18, 2018 Author Share Posted December 18, 2018 Would you guys appriciate a Mission Data Card like this?MDC.pdf Link to comment Share on other sites More sharing options...
Max_Rogue Posted December 18, 2018 Share Posted December 18, 2018 Would you guys appriciate a Mission Data Card like this? Yes, especially if it's built into the knee-board. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted December 19, 2018 Author Share Posted December 19, 2018 Yes, especially if it's built into the knee-board. Of course, I'm currently workin for readability, that's why it's a 2 pages MDC. I wonder if there is a standard US Navy Mission Data Card out there, it would be awesome to have it. Link to comment Share on other sites More sharing options...
Yoda967 Posted December 19, 2018 Share Posted December 19, 2018 All the mission data cards (NAWDC/NSAWC calls them KBCs -- Kneeboard cards) that I've ever seen were custom made with Excel and mission area specific. Strike, CAS, SEAD...all have their own KBCs. I've never seen one available from publicly-accessible sources. Very Respectfully, Kurt "Yoda" Kalbfleisch London "In my private manual I firmly believed the only time there was too much fuel aboard any aircraft was if it was fire." --Ernest K. Gann Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted December 19, 2018 Author Share Posted December 19, 2018 So far so good!I hope to update tomorrow! Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted December 20, 2018 Author Share Posted December 20, 2018 UPDATED! ADDED Mission Data Card on kneeboard for every mission Link to comment Share on other sites More sharing options...
Recommended Posts