Jump to content

Recommended Posts

Posted

[

 

Thanks, I had trouble with the WPTDSG functionality, I must to try the UNDESIGNATE-button.

 

The TM Warthog nipple does work, but you need like 90% deadzones on the X and the Y axes.

Posted

I can confirm this does not work at all, for me. Also using a TM Warthog but, just to be sure, I removed all bindings from the HOTAS and relied on K/B only. Still doesn't work. What happens is when I depress TDC Select (ENTER) the triangle starts moving slowly but the slew keys (in my case NUMPAD 8/6/2/4) does absolutely nothing.

 

Bug?

i7-3930K CPU @ 3.20GHz; 16Gb DDR3; GeForce GTX 1070; Windows 10; TM Warthog HOTAS

Posted
I can confirm this does not work at all, for me. Also using a TM Warthog but, just to be sure, I removed all bindings from the HOTAS and relied on K/B only. Still doesn't work. What happens is when I depress TDC Select (ENTER) the triangle starts moving slowly but the slew keys (in my case NUMPAD 8/6/2/4) does absolutely nothing.

 

Bug?

broken install

| VR goggles | Autopilot panel | Headtracker | TM HOTAS | G920 HOTAS | MS FFB 2 | Throttle Quadrants | 8600K | GTX 1080 | 64GB RAM| Win 10 x64 | Voicerecognition | 50" UHD TV monitor | 40" 1080p TV monitor | 2x 24" 1080p side monitors | 24" 1080p touchscreen |

Posted
broken install

 

Of the module, or DCS World in general? I hav had no problems with other modules.

i7-3930K CPU @ 3.20GHz; 16Gb DDR3; GeForce GTX 1070; Windows 10; TM Warthog HOTAS

Posted
Of the module, or DCS World in general? I hav had no problems with other modules.

I reverted to previous (or release, same)

Then re-updated @openbeta

 

Fixed

YMMV

| VR goggles | Autopilot panel | Headtracker | TM HOTAS | G920 HOTAS | MS FFB 2 | Throttle Quadrants | 8600K | GTX 1080 | 64GB RAM| Win 10 x64 | Voicerecognition | 50" UHD TV monitor | 40" 1080p TV monitor | 2x 24" 1080p side monitors | 24" 1080p touchscreen |

Posted
I reverted to previous (or release, same)

Then re-updated @openbeta

 

Fixed

YMMV

 

will it not be enough to do a repair?

Posted
AGM-65E has greater range, with my Hornet i have sucessful target hits with 65E from range more than 16 mils.

 

Amazing I cant get a lock unless Im within 6 miles. I wish there was a way to get the sim to work.

Posted (edited)
just tried this.. didnt work for me.. also deleted the modul but it didnt work. Can slew when uncaged .

 

You must select left/right DDI to active sensor first. Diamond symbol must appear. And then it is easy to slew.

Edited by DeathAngel1

..:NAVY PILOTS ARE THE THE BEST PILOTS:..

Posted

Is anyone else having trouble on the second maverick when using the WPDSG function? The first one works as expected. Press WPDSG and it will uncage and slew to the waypoint. Undesignating the waypoint then allows me to slew. After firing that maverick I have problems. The second one will initiate caged to bore sight which is normal. But when I hit WPDSG it now will lock on to the ground before making it to the waypoint. I get a full “MAV RDY” symbology and could probably Fire it at that spot if I wanted. Even undesignating the waypoint doesn’t free it to slew. I can eventually get some slewing but it’s very inconsistent and continually locks on the ground.

Posted

Anybody else experiencing problems after re-loading AGM-65F? I did a successful attack with 4 Mavericks, RTB, rearm, take off and en route to the targets the mavericks wouldn't warm up. Tried everything but no joy. Checked the Bit mode on the other DDI and it said "weapon degradation".

So I ran the tests but they seemed to never finish.

 

In the end I had to spawn on a new plane to use the Mavs again...

 

Any recommendations or hints how to get them working after rearming? Much appreciated!

___________________________________________

[sIGPIC][/sIGPIC]

 

Looking forward to it, Belsimtek!:thumbup:

Posted (edited)
Anybody else experiencing problems after re-loading AGM-65F? I did a successful attack with 4 Mavericks, RTB, rearm, take off and en route to the targets the mavericks wouldn't warm up. Tried everything but no joy. Checked the Bit mode on the other DDI and it said "weapon degradation".

So I ran the tests but they seemed to never finish.

 

In the end I had to spawn on a new plane to use the Mavs again...

 

Any recommendations or hints how to get them working after rearming? Much appreciated!

 

 

I do. But it seems that the re-armed 65Fs still warm up 3 minutes but without showing the time. I work around with a simple start of the FA-18C's built in stoppwatch. But you don't have to, of course.

 

 

I sometimes encounter problems to fire the re-armed 65Fs. But after changing to other weapons (not 65Fs!) and back it eventually works.

Edited by Tom Kazansky
Posted
I do. But it seems that the re-armed 65Fs still warm up 3 minutes but without showing the time. I work around with a simple start of the FA-18C's built in stoppwatch. But you don't have to, of course.

 

 

I sometimes encounter problems to fire the re-armed 65Fs. But after changing to other weapons (not 65Fs!) and back it eventually works.

 

 

 

 

Thanks!:thumbup: I tried that workaround and it works. But I´m still wondering if it´s supposed to be this way or if I should mention it in the bugs section:music_whistling:

___________________________________________

[sIGPIC][/sIGPIC]

 

Looking forward to it, Belsimtek!:thumbup:

Posted
Thanks!:thumbup: I tried that workaround and it works. But I´m still wondering if it´s supposed to be this way or if I should mention it in the bugs section:music_whistling:

 

 

It's a bug. But I hope they are already aware. Wags said that 65F is still pretty much WIP. But feel free to check/update the bug list for this one.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...