DCS-ExportScripts for Stream Deck Community Github Library

[Bailey]

On 12/25/2022 at 6:49 AM, bones1014 said:

I downloaded the stream deck files but they don't load anything. Does it work for y'all?

Also, we have a new mod to play with. The SK-60. Time to setup another deck profile.

https://github.com/Breadmaker91/DCS-SK60-Mod/releases/tag/v1.0.0

Sent from my SM-G781U using Tapatalk
 

Which SD files? If for the m2k you may want in the thread the posted in. 

Looking forward to taking a look at the SK60. Thanks for the link. 

[Bailey]

Update:
- SK-60 Mod lua added! https://github.com/asherao/DCS-ExportScripts/tree/master/Scripts/DCS-ExportScript/ExportsModules
Get the DCS mod here: https://github.com/Breadmaker91/DCS-SK60-Mod/releases

[bones1014]

11 hours ago, Bailey said:

Which SD files? If for the m2k you may want in the thread the posted in. 

Looking forward to taking a look at the SK60. Thanks for the link. 

yea it was from the post that was shared. I downloaded it from the DCS User Files link.

[JG14_Smil]

Hi Bailey and thanks for your help. If you don't update profiles here, just use the L-39C.lua file.

I am attaching "L39IkarusScripts.zip". It contains the updated export script in the "DCS-Export Script" folder. Updates to this file include addition of one rear gauge export call for the L39 rear seat EGT gauge and a change to math for the rear seat Command Course needle, which would work in reverse, and now works correctly.

All other fixes to gauges are profile related and I have included these profiles in their respective folders. There are quite a few gauge fixes here. Unzip these to the main Ikarus folder structure. Ikarus has a drawback in that you cannot rename profiles. To switch between profiles for the same module, you have to copy/paste the version you want from their folder to the main "Ikarus-master/Ikarus/L-39C.ikarus" file and choose "over-write". You can Alt-Tab out of DCS at any time to do this if you switch seats in the L-39. Choose the version you want from the folder, right click and select copy. You then paste this into the "Ikarus-master/Ikarus/L-39C.Ikarus" file. Be sure to back this file up first if you have a saved profile.

These profiles will display a L-39 gauge set on at 1920x1200 secondary monitor (multi-monitor setup) with a 4K monitor as primary DCS display. My Ikarus profiles start at "X-3840, Y-0" starting point. You may have to edit these numbers to match your multi-monitor setup. Profile can be edited for 1920x1080. The gauges are in their normal position, nominally life-sized, and there are additional gauges located from the right, left and center panels and radio frequencies/channels around the edges. No lights or annunciators are included, only gauges.

Everything works expept rear seat gauges that are inoperable within DCS. I am probably the only person around using these profiles, but I thought I would share them just in case.

 

Cary  -   smil

 

L39IkarusScripts.zip

Edited December 27, 2022 by JG14_Smil

[Torattacker]

2022/12/22 AM11点45分，Bailey说：

To make a lua for a new module:
- Start DCS and get in the new aircraft
- Open C:\Users\UserName\Saved Games\DCS.openbeta\Logs\Export.log. You will see a line saying something like "Unknown module: Ka-50_3"
- Copy the file C:\Users\UserName\Saved Games\DCS.openbeta\Scripts\DCS-ExportScript\ExportsModules\Empty-DCS.lua and rename it to Ka-50_3.lua
- Open Ka-50_3.lua
- Change the top line to "-- Ka-50_3"
- Change line 4 to `ExportScript.Version.Ka50_3 = "1.2.1"` (note that there is no dash in "Ka50". Always remove the dashes for this step)
- Save the file. Restart DCS. Check that you are getting a value for [0] in DCS-Interface.
- Congrats, now you can start putting in other args in the lua!

Tips:
You can use the following programs to try to get some args auto-generated for you. 
https://github.com/charlestytler/dcs-clickabledata-extract
https://github.com/asherao/dcs-unclickabledata-extract

 

Update:
- Ka-50 III lua added! (Includes about 250 non-clickable args/indications)
https://github.com/asherao/DCS-ExportScripts/tree/master/Scripts/DCS-ExportScript/ExportsModules

 

 

You will have to provide more specific information. What aircraft are you trying to use? What troubleshooting steps have you tried? Have you used the Update button on the proper path in the ID lookup field? etc.

 

It shows nothing.

[Jexmatex]

On 12/27/2022 at 5:40 PM, Torattacker said:

It shows nothing.

i guess it is not linked to the right path, it should have been more something like C:\Users\Yourname\Saved Games\DCS.openbeta\Scripts\DCS-ExportScript\ExportsModules

[Reverend]

vor einer Stunde schrieb Jexmatex:

i guess it is not linked to the right path, it should have been more something like C:\Users\Yourname\Saved Games\DCS.openbeta\Scripts\DCS-ExportScript\ExportsModules

I think the path is correct. It should be the path to DCS and not to the export scripts.

[Motion_Blurz]

On 12/21/2022 at 10:52 PM, Bailey said:

I am glad to provide.

Unfortunately, a fully populated MB-339 lua file is unlikely due to the time and effort it would take me to make it. You can follow the steps above to make the base lua file as an exercise. 

Edit: I had already started doing a MB-339A lua. If you or anyone else would like to continue my efforts, let me know and I can send or post the incomplete file. The biggest difficulty is that the aircraft is not only a 2 seater, but there are 2 versions. This, more or less, means that the effort required for complete luas will be that of almost 4 separate single seater aircraft.

Let me know if you want me to post what I have into the library.

 

More than happy to take a look at it.  Will gladly share if I get anything figured out.

[bones1014]

has anyone built a profile for the UH-60 mod? I have an old of of @Baileybut it hasn't been touched in ages. Just don't want to duplicate work.

[Norsk-L]

16 hours ago, Motion_Blurz said:

More than happy to take a look at it.  Will gladly share if I get anything figured out.

 Hi, I got the same issue (With Ka-50_3)

It wont show up, I got everything else set but ka50_3 wont show up 

every other plane works 

Edited December 31, 2022 by Norsk-L

[bones1014]

I pulled the trigger on the stream deck+ due to some Christmas money. Arrived today and I'll see what I can do with it.

Sent from my SM-G781U using Tapatalk

[Bailey]

On 12/31/2022 at 5:37 AM, bones1014 said:

has anyone built a profile for the UH-60 mod? I have an old of of @Baileybut it hasn't been touched in ages. Just don't want to duplicate work.

Check the the mods discord. 

[sobe]

Is that on your discord?  I am looking for a current F1 profile and button art for it.  

[bones1014]

Check the the mods discord. 

I just finished rebuilding your old one with the new references

Sent from my SM-G781U using Tapatalk

[sobe]

Where can I find it?

[bones1014]

I'll have to upload it.

Sent from my SM-G781U using Tapatalk

[Bailey]

9 hours ago, sobe said:

Is that on your discord?  I am looking for a current F1 profile and button art for it.  

What I have for my F1 profile is here: 
https://github.com/asherao/DCS-ExportScripts/tree/master/docu/StreamDeck Examples

Check out the pics here:
https://github.com/asherao/DCS-ExportScripts/wiki/Mirage-F1

Edited January 1, 2023 by Bailey

[Dautty]

Button ID or other data cannot be displayed properly in both F-16C and FA-18C, but it can be displayed in Flaming Cliffs, although the display is not complete. Can this problem be solved?

[sobe]

How do I get the pictures for the buttons?

 

[Bailey]

6 hours ago, sobe said:

How do I get the pictures for the buttons?

 

Rename the profile to a .zip and extract it. 

Or look here: https://github.com/asherao/DCS-ExportScripts/tree/master/docu/Pics/Mirage F1

Edited January 1, 2023 by Bailey

[Bailey]

11 hours ago, Dautty said:

Button ID or other data cannot be displayed properly in both F-16C and FA-18C, but it can be displayed in Flaming Cliffs, although the display is not complete. Can this problem be solved?

You may want to post the issue in the main DCS-Interface thread. It may be more relevant there and more people would be able to help. 

[Dautty]

10小时前，Bailey说：

You may want to post the issue in the main DCS-Interface thread. It may be more relevant there and more people would be able to help. 

I've been using the steam version before. After removing the steam version and installing the official version it was available.

[Nirvi]

Export script for the FW-190 A8

It's my first try in creating a profile, hope I made no mistakes.

 

FW-190A8.lua

[andyfoot]

On 12/31/2022 at 9:40 AM, Norsk-L said:

 Hi, I got the same issue (With Ka-50_3)

It wont show up, I got everything else set but ka50_3 wont show up 

every other plane works 

 

I've got the same issue, just can't get anything listed. Have gone over it several times but nothing seems to get anything to appear

[Rettich]

Am 31.12.2022 um 10:40 schrieb Norsk-L:

 Hi, I got the same issue (With Ka-50_3)

It wont show up, I got everything else set but ka50_3 wont show up 

every other plane works 

 

here the same