Mamakin Posted January 31 Posted January 31 Hi. Am I doing something wrong? The Hundreds Mills Weel can only be set to 0 or 1. Can't set more than that; the training rocket mission ask to set it to 200 but I can not so the mission it's stuck... Thanks 1
Solution AdrianL Posted January 31 Solution Posted January 31 See below. Training missions need to be updated 1
IvanK Posted January 31 Posted January 31 The Mills setting was originally all wrong (both selection and angular value). The max sight setting IRL is 199mills. This was corrected a while ago. 1
Tusky Posted February 6 Posted February 6 @IvanK The manual indicates mil settings greater than 199. I assume that when it states e.g. 850mils, the setting to be used in the sight is 85. Is this correct? P.S. I tried it yesterday on a dive bomb with Mk-81 and after releasing at approximately the correct indicated angle, altitude ad speed, it looked about right...
Ramsay Posted February 6 Posted February 6 (edited) 11 hours ago, Tusky said: I assume that when it states e.g. 850mils, the setting to be used in the sight is 85. Is this correct? No, after the gunsight depression was changed, the old depression tables were removed from the in game kneeboard - however the training missions and DCS MB-339 Manual have yet to be updated (a known WIP issue) and still use the old (incorrect) values. AFAIK you should be looking for a depression setting ~140 mils at 30° Dive Angle, 400 KTAS, 3000' AGL This post has values based off the real aircraft which can be used as starting values in DCS. Edited February 6 by Ramsay 2 i9 9900K @4.8GHz, 64GB DDR4, RTX4070 12GB, 1+2TB NVMe, 6+4TB HD, 4+1TB SSD, Winwing Orion 2 F-15EX Throttle + F-16EX Stick, TPR Pedals, TIR5, Win 11 Pro x64, Odyssey G93SC 5120X1440
SOLIDKREATE Posted February 21 Posted February 21 This is still not fixed. I'm still being asked to set to 2-0-0 For the Unguided Rockets mission 1 AVIONICS: ASUS BTF TUF MB, INTEL i9 RAPTORLAKE 24 CORE, 48GB PATRIOT VIPER TUF 6600MHz, 16GB ASUS TUF RTX 4070ti SUPER, ASUS TUF 1000w PSU CONTROLS: LOGI X-56 RHINO HOTAS, LOGI PRO RUDDER PEDALS, LOGI G733 LIGHTSPEED MAIN BIRDS: F/A-18C, MIRAGE F1
6S.Duke Posted February 23 Posted February 23 This is still not fixed. I'm still being asked to set to 2-0-0 For the Unguided Rockets mission Missions are corrupted at the moment. They will.be fixed shortlyInviato dal mio SM-F731B utilizzando Tapatalk 2 MB339 EFM Coder Frecce Tricolori Virtuali [sIGPIC][/sIGPIC]
lwalter Posted May 3 Posted May 3 any news on this issue? training for rockets is still unusable because of 200 depression requested. 1 iMac Retina 5K, 27-inch, i7 4 GHz, 32 GB RAM, AMD R9 M395X 4 GB | Thrustmaster HOTAS Warthog | Cougar MFD | MFG Crosswind | EDTracker Pro | Realteus ForceFeel DCS World | Bf109 | Fw190 A8/D9 | P47 | P51 | Spitfire | I16 | C101 | L39 | F86F | MiG15 | MiG19 | MiG21 | FC3 | A10C | AJS37 | AV8BNA | F5 | F14 | F16 | F/A18 | M2000 | JF17 | Christen Eagle | Yak52 | SA342 | UH1H | Mi8 | Ka50 | Combined Arms | NS430 | Persian Gulf | Normandy | Channel | Syria | NTTR | WWII Assets
CrimzN Posted May 28 Posted May 28 I noticed it too, still an issue. When the instructor asks you to set depression 200, I set it to 020, seems to be correct to get the rockets on the right trajectory at 1000 feet shallow angle. You can keep the training going by setting master arm on, he will continue the lesson.
Recommended Posts