felipesm Posted May 16 Posted May 16 the last message before freezing was: WARNING WORLD (Main): ModelTimeQuantizer: ANTIFREEZE ENABLED So i had to restart my pc. dcs.log
scommander2 Posted May 16 Posted May 16 i7-9700KF has 8 cores and 8 threads with "--affinity=7FF", but the max affinity is "FF". How does 7FF work? 1 Spoiler Dell XPS 9730, i9-13900H, DDR5 64GB, Discrete GPU: NVIDIA GeForce RTX 4080, 1+2TB M.2 SSD | Thrustmaster Warthog HOTAS + TPR | TKIR5/TrackClipPro | Total Controls Multi-Function Button Box | Win 11 Pro
sleighzy Posted May 16 Posted May 16 (edited) 4 hours ago, felipesm said: the last message before freezing was: WARNING WORLD (Main): ModelTimeQuantizer: ANTIFREEZE ENABLED So i had to restart my pc. dcs.log 114.23 kB · 3 downloads This post is about cores reaching 100%, is this what you are experiencing? Your log is filled with errors from your mods and terrains. Remove those (including saved games mods/terrains) and run a repair. You can put them back, check the log to see which ones are causing errors each time, eg zip driver failing to open them Also what @scommander2 said, remove that process affinity mask from your shortcut, you’re killing off 3 cores (which seems like a weird number) making them not available. Recommend upgrading to Windows 11 as well to make better use of your cores. Run DCS from bin instead of bin-mt as well, they’re both multithreaded and bin-mt is going away. Ensure that DCS is also not being run as admin If you’re not using TacView then remove that as well as can cause additional performance issues. Edited May 16 by sleighzy 1 AMD 7800x3D, 4080Super, 64Gb DDR5 RAM, 4Tb NVMe M.2, Quest 2
felipesm Posted May 16 Posted May 16 1 hour ago, scommander2 said: i7-9700KF has 8 cores and 8 threads with "--affinity=7FF", but the max affinity is "FF". How does 7FF work? I had this setting on the executable file, but i already removed it and the freezing still happening. dcs.log
Mr_sukebe Posted May 17 Posted May 17 11 hours ago, felipesm said: I had this setting on the executable file, but i already removed it and the freezing still happening. dcs.log 198.3 kB · 0 downloads Is that before or after removing you mods and using the Skatezilla App to run a full repair? 7800x3d, 5080, 64GB, PCIE5 SSD - Oculus Pro - Moza (AB9), Virpil (Alpha, CM3, CM1 and CM2), WW (TOP and CP), TM (MFDs, Pendular Rudder), Tek Creations (F18 panel), Total Controls (Apache MFD), Jetseat
felipesm Posted May 17 Posted May 17 3 hours ago, Mr_sukebe said: Is that before or after removing you mods and using the Skatezilla App to run a full repair? Before. I performed the full repair and cleaning through of the launcher also after. However ,i rolled back to the DCS 2.9.13.6818.2 version while they solve this problem.
Schlomo1933 Posted May 31 Posted May 31 For me is also 1 core maxed out. Please @Special K , @Flappie could you please take a look in my Logs ? -I have a clean Win11 Pro install - Cores are unparked dcs.log.old dcs.log debrief.log DxDiag.txt
Apple Posted May 31 Posted May 31 (edited) I see the same problem on our AMD server (latest patches as of yesterday). If I remove the overloaded cores from our highest demanding server instances and add them back, it looks a lot better - affinity setting needs looking into please - in how far this is related to a performance issue with the new Germany CW map running on our 2 most demanding server instances I cannot say. Before 8am below - instances running with "unpatched" GermanyCW map. After 8am new version with re-saved mission. Peaks removed after 9:45 by re-setting affinits on 2 cores which ran with 90-100% load. Me joinign at 11am. @BIGNEWY null Edited May 31 by Apple 2
Flappie Posted May 31 Posted May 31 @Schlomo1933 Hey, I don't see anything bad in your logs. One thing though: I see you have the K profile enforced in DCS. If you've been using what was advertised by a user a few days ago, try to use default DCS NVIDIA profile instead. ---
Schlomo1933 Posted May 31 Posted May 31 Maybe there is setting wrong with my bios ? I have a gigabyte z790 Aorus elite AX board v1.1 and an intel i9 13900k. Are there any specific settings in bios I have to select ? I have the intel preset profile running and activated xmp 1 for my ram. onboard graphic is switched off. any suggestion?
Special K Posted June 3 Posted June 3 Am 31.5.2025 um 11:08 schrieb Schlomo1933: For me is also 1 core maxed out. Please @Special K , @Flappie could you please take a look in my Logs ? -I have a clean Win11 Pro install - Cores are unparked dcs.log.old 2.01 kB · 1 Download dcs.log 197.89 kB · 2 Downloads debrief.log 26.65 kB · 0 Downloads DxDiag.txt 135.07 kB · 2 Downloads Sorry, just saw it today. You have a ton of memory related issues logged in your DXDiag. And I can not find that BIOS anymore which is usually a bad sign (vendors pull bad BIOS versions). So - try the following: - Update your BIOS to the latest available version. Check your chipset drivers also. - Disable XMP - Try again
Schlomo1933 Posted June 3 Posted June 3 (edited) Thank you @Special K for your answer. - I updated now my graphiccard to a rtx5090 - updated my bios to version: FK - Disabled the XMP Profile for my RAM with my board driver im not 100% shure... i have a gigabyte aorus Elite AX Bord revision 1.1 But on the Gigabyte Downloadpage i cannot find revision 1.1 . Just 1.0 and 1.X . So u used the driver for 1.X. Is this correct ? Can u confirm this or maybe im a bit stupid ... My 1st Core is still maxed out ... Here is the new DXDiag file . Thank you very much for your time and help DxDiag.txt Edited June 3 by Schlomo1933
Schlomo1933 Posted June 3 Posted June 3 hera are also the logs from last flight debrief.logdcs.log.olddcs.log
Special K Posted June 3 Posted June 3 vor 3 Stunden schrieb Schlomo1933: Thank you @Special K for your answer. - I updated now my graphiccard to a rtx5090 - updated my bios to version: FK - Disabled the XMP Profile for my RAM with my board driver im not 100% shure... i have a gigabyte aorus Elite AX Bord revision 1.1 But on the Gigabyte Downloadpage i cannot find revision 1.1 . Just 1.0 and 1.X . So u used the driver for 1.X. Is this correct ? Can u confirm this or maybe im a bit stupid ... My 1st Core is still maxed out ... Here is the new DXDiag file . Thank you very much for your time and help DxDiag.txt 138.43 kB · 2 Downloads Yes, that would be 1.x Your PC crashes a lot in the Gigabyte Control Center with a file not found error. Can you reinstall this software also please? And if you do not necessarily need it - can you just uninstall it? From the DCS log, all I can see which I would disable is civil traffic, the rest looks pretty much ok. The core that you report as maxed out - does that happen in the main menu only or also during flying?
Schlomo1933 Posted June 3 Posted June 3 (edited) I tried to deinstall the Gigabyte Center , but the the Gigabyte Downloadservice and the Gigabyte Updateservice are not possible to delete. Here is the DxDiag.log and 3 screenshots how it looks in the Taskmanager. -First Screenshot is Idle -second Screenshot is DCS in Menu VR -third screenshot is DCS flyingin VR DxDiag.txt Edited June 3 by Schlomo1933
scommander2 Posted June 3 Posted June 3 It seems that we are back to the ST version. 1 Spoiler Dell XPS 9730, i9-13900H, DDR5 64GB, Discrete GPU: NVIDIA GeForce RTX 4080, 1+2TB M.2 SSD | Thrustmaster Warthog HOTAS + TPR | TKIR5/TrackClipPro | Total Controls Multi-Function Button Box | Win 11 Pro
scommander2 Posted June 3 Posted June 3 (edited) May I suggest that can we setup the processor affinity to all P-cores only through Task Manager manually for testing? Based on the last graph, E-cores had lots of activities... Edited June 3 by scommander2 Spoiler Dell XPS 9730, i9-13900H, DDR5 64GB, Discrete GPU: NVIDIA GeForce RTX 4080, 1+2TB M.2 SSD | Thrustmaster Warthog HOTAS + TPR | TKIR5/TrackClipPro | Total Controls Multi-Function Button Box | Win 11 Pro
Dangerzone Posted June 3 Posted June 3 3 hours ago, Schlomo1933 said: I tried to deinstall the Gigabyte Center , but the the Gigabyte Downloadservice and the Gigabyte Updateservice are not possible to delete. Check your BIOS settings. IIRC Gigabyte's BIOS has a setting for 'automatic download/update of software'. It's a BIOS setting that literally takes over your windows and does downloads and installations of their software onto your OS automatically without you knowing about it, and I believe it's set by default to ON (and resets after every BIOS update). Definitely worth disabling this before trying to uninstall the software, or you may find it just installs back over the top again. Then you may be able to uninstall the software via windows safe mode.
Schlomo1933 Posted June 4 Posted June 4 @Dangerzone thank you for the advice , i have done it . Gigabyte Downloadservice and the Gigabyte Updateservice are not more shown in the tasklist. But the GbtCloudMatrix is still shown in the DxDiag @scommander2 i tried this. Here are screenshots from taskmanager 1- is Core 0-7 active 2-is Core 0-15 active
scommander2 Posted June 4 Posted June 4 The 2nd graph seems nice to me since 13900k P-cores is from 0-15 (with hyper-threading). How is the performance for this configuration then? Spoiler Dell XPS 9730, i9-13900H, DDR5 64GB, Discrete GPU: NVIDIA GeForce RTX 4080, 1+2TB M.2 SSD | Thrustmaster Warthog HOTAS + TPR | TKIR5/TrackClipPro | Total Controls Multi-Function Button Box | Win 11 Pro
Schlomo1933 Posted June 4 Posted June 4 Performance with all different settings good 72 fps most of the time (sometimes over Berlin Germanymap it goes down to 36) but temps are over 70 degrees…. but I can’t understand that iam the only one where core 0 and 1 are maxed out don’t know what I can do now.
scommander2 Posted June 4 Posted June 4 39 minutes ago, Schlomo1933 said: but I can’t understand that iam the only one where core 0 and 1 are maxed out Hope that we can be enlighten by @Special K, @Flappie or ED developers. In general, if a process that is the long-time life cycle or bounded by the CPU id in the code then that CPU id is very busy than others, and OS may not swap the process id out to another CPU id less frequently for the scheduling purpose. I am not sure that how DCS is coded. 48 minutes ago, Schlomo1933 said: but temps are over 70 degrees…. Yes, we are kind pushing all DCS tasks over all P-cores and they are running the high frequency rate, and that is cons. Spoiler Dell XPS 9730, i9-13900H, DDR5 64GB, Discrete GPU: NVIDIA GeForce RTX 4080, 1+2TB M.2 SSD | Thrustmaster Warthog HOTAS + TPR | TKIR5/TrackClipPro | Total Controls Multi-Function Button Box | Win 11 Pro
Special K Posted June 6 Posted June 6 Am 4.6.2025 um 10:36 schrieb Schlomo1933: @Dangerzone thank you for the advice , i have done it . Gigabyte Downloadservice and the Gigabyte Updateservice are not more shown in the tasklist. But the GbtCloudMatrix is still shown in the DxDiag @scommander2 i tried this. Here are screenshots from taskmanager 1- is Core 0-7 active 2-is Core 0-15 active Can you disable the Nvidia overlay please and see if that changes anything? We had some users where the Nvidia overlay caused exactly that.
Recommended Posts