Mr_sukebe Posted April 20 Posted April 20 I've just done some more testing. With SAMs at 31 of the identified sites and additional smaller units at some of the airfields (e.g. Sa6s) and the mission is basically unplayable on my PC. The GPU is fine. The CPU is simply flattened. I've just tried running the same mission on a dedicated server and then logging in, it was no better. So I'm going to be sticking with the slimmed down version that I've uploaded earlier (v.3 and newer). 7800x3d, 5080, 64GB, PCIE5 SSD - Oculus Pro - Moza (AB9), Virpil (Alpha, CM3, CM1 and CM2), WW (TOP and CP), TM (MFDs, Pendular Rudder), Tek Creations (F18 panel), Total Controls (Apache MFD), Jetseat
mmarques Posted April 20 Posted April 20 (edited) 5 hours ago, Blackbahia said: Yes, they are...look in the list from Essah I must be blind, I only see HAWK, SA-3 and SA-5 on that list. Edited April 20 by mmarques Removed duplication.
Essah Posted April 20 Posted April 20 Updated * I had moved Patriot and SA-2 locations to Hawk and SA-3 respectively, thinking it was a mistake given that the layout of the sites is of SA-3 and HAwk type, but I have now added it back in with clarification. Seems that Ugra did not create the correct unique layouts for Patriot and SA-2 * added additional sites reported. * added some otherwise unmarked NATO radar sites
Blackbahia Posted April 20 Posted April 20 vor einer Stunde schrieb mmarques: I must be blind, I only see HAWK, SA-3 and SA-5 on that list. nullThey are east of Gießen and near Hameln
mmarques Posted April 20 Posted April 20 20 minutes ago, Blackbahia said: nullThey are east of Gießen and near Hameln Yes as the post above yours shows, the OP just re-added them, they were not there when I posted. Thank you
Blackbahia Posted April 20 Posted April 20 vor 2 Stunden schrieb mmarques: Yes as the post above yours shows, the OP just re-added them, they were not there when I posted. Thank you nullBut they were in my post on the second page. Essah has addet our search results to his list, so we've all one overview. 1
Essah Posted April 20 Posted April 20 31 minutes ago, Blackbahia said: nullBut they were in my post on the second page. Essah has addet our search results to his list, so we've all one overview. I had them removed for a while because I thought it was a mistake, and that's when Null was looking at it.
Ian Boys UK Posted April 20 Author Posted April 20 UPDATED VERSION OF THE AIRBASE AND SAM MAP with thanks to Essah and others in this thread 1985 MARKED.miz 3 4
S3ntry Posted April 21 Posted April 21 Love the positivity around this map and the support of the community!! I've also created an in depth version of East Germany with SAM/EWR sites, Training Grounds and HQs. Infos on regiments and equipment used all in the IPs visible in the ME. Added some scripts like MIST, MOOSE, Skynet, CTLD and Splash Damage. Hope this helps future mission builders https://www.digitalcombatsimulator.com/en/files/3344411/ 1 1
Mr_sukebe Posted April 21 Posted April 21 I found this site quite interesting: https://geimint.blogspot.com/2008/08/ddr-air-defense-cold-war-case-study.html 1 7800x3d, 5080, 64GB, PCIE5 SSD - Oculus Pro - Moza (AB9), Virpil (Alpha, CM3, CM1 and CM2), WW (TOP and CP), TM (MFDs, Pendular Rudder), Tek Creations (F18 panel), Total Controls (Apache MFD), Jetseat
winghunter Posted April 21 Posted April 21 16 minutes ago, Mr_sukebe said: I found this site quite interesting: https://geimint.blogspot.com/2008/08/ddr-air-defense-cold-war-case-study.html Why didnt they use the elevation of Thüringer Wald and Harz for setting up elevated defenses 1 DCS Web Editor - New 3D Mission Editor for DCS that runs in your browser DCS Web Viewer free browser based mission planner 4090 RTX, 13700KF, water cooled, Quest 3
Essah Posted April 22 Posted April 22 Updated list. If the moderator hadn't merged my thread with the other one, my master list would have been OP on page one, but what do I know. 1
qmpz12353 Posted April 23 Posted April 23 2025/4/18 AM10点28分,Blackbahia说: I've only found this kmz file with the postions of the SAM sites ColdWarIADS10182024.kmz Could be a reference if the data is correct. 2 1
Mr_sukebe Posted April 23 Posted April 23 Have updated my sandbox mission and have attached it if it helps anyone. Key updates are: Added markings on the F10 map for locations of fixed Soviet SAM sites. By fixed, that means the SA2, SA3 and SA5 sites. SA6 are mobile and are NOT marked Added what appears to be the expected route(s) for a Soviet advance using the Fulda gap. For that route, have added target points for rail bridges that would likely be used to supply forward Soviet units Tidied up the positioning of the SA2 and SA3 sites New AI quick reaction flights on each side In the new few days, I'll be updating with pickzones and similar to aid with CTLD. Germany - 1985 - v.4.miz 3 1 7800x3d, 5080, 64GB, PCIE5 SSD - Oculus Pro - Moza (AB9), Virpil (Alpha, CM3, CM1 and CM2), WW (TOP and CP), TM (MFDs, Pendular Rudder), Tek Creations (F18 panel), Total Controls (Apache MFD), Jetseat
Northstar98 Posted April 23 Posted April 23 4 minutes ago, Mr_sukebe said: SA6 are mobile and are NOT marked There should be a prepared SA-6 position south of Erfut. Clearly visible in historical satellite imagery. There should be another likely one here (though SAMSiteOverview has this as a prepared SA-8 site). 1 Modules I own: F-14A/B, F-4E, Mi-24P, AJS 37, AV-8B N/A, F-5E-3, MiG-21bis, F-16CM, F/A-18C, Supercarrier, Mi-8MTV2, UH-1H, Mirage 2000C, FC3, MiG-15bis, Ka-50, A-10C (+ A-10C II), P-47D, P-51D, C-101, Yak-52, WWII Assets, CA, NS430, Hawk. Terrains I own: South Atlantic, Syria, The Channel, SoH/PG, Marianas. System: GIGABYTE B650 AORUS ELITE AX, AMD Ryzen 5 7600, Corsair Vengeance DDR5-5200 32 GB, NVIDIA GeForce RTX 4070S FE, Western Digital Black SN850X 1 TB (DCS dedicated) & 2 TB NVMe SSDs, Corsair RM850X 850 W, NZXT H7 Flow, MSI G274CV. Peripherals: VKB Gunfighter Mk.II w. MCG Pro, MFG Crosswind V3 Graphite, Logitech Extreme 3D Pro.
Oesau Posted April 24 Posted April 24 @Mr_sukebe hope you don't mind but I've updated your mission so that the blue units/groups are named correctly to show what they are rather than SA2/3/6 that were showing incorrectly for blue assets. The numbers are a bit all over the place but at least on the map they are now named what the actual group is Germany - 1985 - v.5.miz 2
Mr_sukebe Posted April 25 Posted April 25 8 hours ago, Oesau said: @Mr_sukebe hope you don't mind but I've updated your mission so that the blue units/groups are named correctly to show what they are rather than SA2/3/6 that were showing incorrectly for blue assets. The numbers are a bit all over the place but at least on the map they are now named what the actual group is Germany - 1985 - v.5.miz 590.21 kB · 3 downloads Hey, that’s cool, go for it. As mentioned, this is just a sandbox, with some of the groundwork done, so feel free to play with it and use it how you wish. 7800x3d, 5080, 64GB, PCIE5 SSD - Oculus Pro - Moza (AB9), Virpil (Alpha, CM3, CM1 and CM2), WW (TOP and CP), TM (MFDs, Pendular Rudder), Tek Creations (F18 panel), Total Controls (Apache MFD), Jetseat
GarrettJMorgan Posted April 27 Posted April 27 Is there a way to merge missions? I already started some work on one mission doing some maps markers and just want to transfer over all the other map markers from the one here for the sam sites and all.
Dangerzone Posted April 27 Posted April 27 (edited) 4 hours ago, GarrettJMorgan said: Is there a way to merge missions? I already started some work on one mission doing some maps markers and just want to transfer over all the other map markers from the one here for the sam sites and all. If you mean within the mission editor, then Yes. Under one of the menu's in the mission editor is an option to "Save template to file" and "Load template from file", or similar. Use the save template to file option to save one of your maps. You can then import/merge it into another map by opening up the other map, and choosing load template from file, and choosing the template you just saved. Edited April 27 by Dangerzone 1
GarrettJMorgan Posted April 28 Posted April 28 4 hours ago, Dangerzone said: If you mean within the mission editor, then Yes. Under one of the menu's in the mission editor is an option to "Save template to file" and "Load template from file", or similar. Use the save template to file option to save one of your maps. You can then import/merge it into another map by opening up the other map, and choosing load template from file, and choosing the template you just saved. I mean I can see that for the units and all but I'm trying to do that strictly for map markers and those don't seem to transfer over.
MagicSlave Posted April 28 Posted April 28 I mean I can see that for the units and all but I'm trying to do that strictly for map markers and those don't seem to transfer over.You can open the Miz file with a text editor (e.g. Notepad++) and copy paste map markers to another Miz file. Sent from my FP4 using Tapatalk
drPhibes Posted April 29 Posted April 29 On 4/28/2025 at 1:36 PM, MagicSlave said: You can open the Miz file with a text editor (e.g. Notepad++) and copy paste map markers to another Miz file. Sent from my FP4 using Tapatalk Not directly. You have to open the .miz file with 7zip (or similar software; it's just a zip file), and edit the text file named "mission" in the zip. 1
MagicSlave Posted April 29 Posted April 29 Not directly. You have to open the .miz file with 7zip (or similar software; it's just a zip file), and edit the text file named "mission" in the zip.Yes, indeed you are correct. Good point and my bad.Sent from my FP4 using Tapatalk
EvilBert VR Posted May 1 Posted May 1 @winghunter Same name on discord? My System: Full Scale Huey SimPit -Pit Base Computer: AMD Ryzen 7 9800X3D | ASUS Prime X870-P | 64GB DDR5 RAM | Nvidia RTX5090 OC | 2x 4TB M.2 -Sim Computer: i7-12700K | Gigabyte Z690 AORUS Pro | 64GB DDR5 RAM | Nvidia RTX3090FE | Kingston KC3000 NVme - All day use: i7-4790K | 32GB DDR4 RAM | ASRock Z97 Killer | GeForce RTX 2080 Ti AMP! | Oculus Rift | Pimax8KX | Sensoryx VRFree Gloves | X-TAL VR
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now