westr Posted Thursday at 09:57 AM Posted Thursday at 09:57 AM As far as you are concerned do you feel this subject is closed Magnitude? i.e level flight speed and engine settings are where they should be? RYZEN 7 3700X Running at 4.35 GHz NVIDIA GeForce GTX 1080Ti 32gb DDR4 RAM @3200 MHz Oculus CV1 NvME 970 EVO TM Warthog Stick & Throttle plus 11" extension. VKB T-Rudder MKIV
Mr_sukebe Posted Thursday at 04:55 PM Posted Thursday at 04:55 PM Has anyone retested the speed of the Corsair? From the update notes I see that the RPM overspeed issue has been resolved, whilst drag has reduced. At 2700rpm, how’s the speed looking against the charts? Sorry, away from my PC for a few days, so can’t test myself 7800x3d, 5080, 64GB, PCIE5 SSD - Oculus Pro - Moza (AB9), Virpil (Alpha, CM3, CM1 and CM2), WW (TOP and CP), TM (MFDs, Pendular Rudder), Tek Creations (F18 panel), Total Controls (Apache MFD), Jetseat
Saxman Posted Thursday at 05:48 PM Posted Thursday at 05:48 PM 40 minutes ago, Mr_sukebe said: Has anyone retested the speed of the Corsair? From the update notes I see that the RPM overspeed issue has been resolved, whilst drag has reduced. At 2700rpm, how’s the speed looking against the charts? Sorry, away from my PC for a few days, so can’t test myself I haven't done any real scientific testing, but ADI appears to now be properly boosting MAP to the right range (now if you're not getting enough power you're probably in the wrong blower setting) and I'm no longer feeling like she's struggling to hold energy, especially in nose-up maneuvering. 2
AJaromir Posted 18 hours ago Posted 18 hours ago (edited) I've reached 535 km/h TAS ( 332 MPH or 289 KTS ) in 5000 meters ( 16 404 feet ) in level flight. MPR 54", 2700 RPM, low blower Edited 18 hours ago by AJaromir
AJaromir Posted 17 hours ago Posted 17 hours ago (edited) New test result: 335 KTS TAS at 20 000 ft. Weather: 15°C QNH 29.92 75% fuel, no ammo 54" MP 2700 RPM High blow It is very important to properly manage the engine cowl flaps which makes really huge drag. Edited 17 hours ago by AJaromir
Saxman Posted 15 hours ago Posted 15 hours ago 1 hour ago, AJaromir said: New result: with low blower I've reched 344 KTS Injection on or off?
AJaromir Posted 15 hours ago Posted 15 hours ago 12 minutes ago, Saxman said: Injection on or off? Don't know. Did not turn on anything. Just set throttle to max
Saxman Posted 15 hours ago Posted 15 hours ago 1 minute ago, AJaromir said: Don't know. Did not turn on anything. Just set throttle to max Ok, so you don't have injection on. That's a separate key press. So you're maxing out and Military power, not WEP.
AJaromir Posted 15 hours ago Posted 15 hours ago 3 minutes ago, Saxman said: Ok, so you don't have injection on. That's a separate key press. So you're maxing out and Military power, not WEP. Yes, according to performance table. null
felixx75 Posted 13 hours ago Posted 13 hours ago (edited) 3 hours ago, Saxman said: Injection on or off? There is no “On / Off” button for the water injection. You can operate this small microswitch with a screwdriver, for example. However, this is only intended for maintenance purposes, e.g. to fill the system. In flight, this microswitch is activated automatically by pushing the thrust lever all the way forward. 2 hours ago, AJaromir said: Yes, according to performance table. null Edited 12 hours ago by felixx75
AJaromir Posted 13 hours ago Posted 13 hours ago So, to understand the ADI is injected once I pass the detent? Jusk asking because I have set physical detent at the exact same point.
felixx75 Posted 13 hours ago Posted 13 hours ago (edited) 5 minutes ago, AJaromir said: So, to understand the ADI is injected once I pass the detent? Jusk asking because I have set physical detent at the exact same point. Water injection is activated when the throttle lever is pushed all the way forward (over the deten, all the way to the front). Edited 13 hours ago by felixx75
AJaromir Posted 13 hours ago Posted 13 hours ago (edited) O.k. Thank You for this info. Still I don't think the F-4U in DCS:W is somehow slow. As posted above, understanding difference between IAS and TAS and propper engine management makes a big difference. Edited 13 hours ago by AJaromir
Saxman Posted 10 hours ago Posted 10 hours ago (edited) 2 hours ago, felixx75 said: Water injection is activated when the throttle lever is pushed all the way forward (over the deten, all the way to the front). It's SUPPOSED to be tied directly to the throttle, but that's now how it is in the module. M3 made it a separate key press. And if he's only getting 54in MAP at 20,000ft he's NOT on ADI. Edited 10 hours ago by Saxman
Nealius Posted 1 hour ago Posted 1 hour ago Warbird dumbo here, what is "ADI" in these contexts? It certainly isn't Attitude Display Indicator...
felixx75 Posted 1 hour ago Posted 1 hour ago 9 hours ago, Saxman said: M3 made it a separate key press I dare to doubt that and will only believe it when you show me where they confirm this exactly. If it really only gets 54MP at 20k ft, then something is fundamentally wrong. At sea level, you can get 57.5 without any problems and without pressing an extra button. So if M3 really did implement it the way you think they did, there must be a confirmation somewhere from M3 (which I don't believe, because I don't see any change when I press this button at full throttle - how could I, since the water injection is already activated at full throttle), otherwise it is quite reasonable to assume that M3 implemented it realistically.
Vladinsky Posted 45 minutes ago Posted 45 minutes ago 20 minutes ago, felixx75 said: I dare to doubt that and will only believe it when you show me where they confirm this exactly. If it really only gets 54MP at 20k ft, then something is fundamentally wrong. At sea level, you can get 57.5 without any problems and without pressing an extra button. So if M3 really did implement it the way you think they did, there must be a confirmation somewhere from M3 (which I don't believe, because I don't see any change when I press this button at full throttle - how could I, since the water injection is already activated at full throttle), otherwise it is quite reasonable to assume that M3 implemented it realistically. Easy to test, how long can you run full throttle before the 3 minutes remaining light turns on if you don't press the water injection on keybind?
AJaromir Posted 26 minutes ago Posted 26 minutes ago (edited) 1 hour ago, Nealius said: Warbird dumbo here, what is "ADI" in these contexts? It certainly isn't Attitude Display Indicator... Anti Detonation Injection - Its main purpose is to prevent engine knocking and premature ignition. At low altitudes it has secondary effect of increasing manifold pressure ( cool air = more dense ) Principle is: Water has the highest specific heat capacity of all common substances 4180 J/(kg·K). But that's not the most important thing. The most important thing is that in order for water to turn into steam, it needs an additional 2257 kJ/kg of heat. This allows it to cool the engine much more efficiently than a rich fuel mixture, because aviation fuel has almost half the specific heat capacity of water. In my opinion it is not simulated yet. Because I think there should be "jump" in power at low altitudes, just like in P-47. Edited 1 minute ago by AJaromir
Recommended Posts