Nate--IRL-- Posted June 3, 2010 Share Posted June 3, 2010 (edited) What are the requirements to complete this mission? I have successfully fended off all attackers, none of the strike package, or indeed any of my side, are shot down. Anybody have any ideas? Track File ----> http://www.mediafire.com/file/m2yyzyngmty/LastMissionTrack2.trk Edit:- TacView Added too. ---> http://www.mediafire.com/file/zzyjowyoyn0/Tacview-20100603-154207.txt.zip Nate Edited June 3, 2010 by Nate--IRL-- Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading Link to comment Share on other sites More sharing options...
gabuzomeu Posted June 3, 2010 Share Posted June 3, 2010 Hi, If this is one of the mission you escort a strike, I think success is linked to package being in exit zone (don't remember the number). And unfortunately, the success rate goes back to 50% when all the package is out of this zone, safely RTB. So you have to go to the strike, accompany package up to the order and exit mission before package leaves the target zone near the border. And you can check targets by opening the mission file in the mission editor. Good luck! Details: Asus Z-170E, Intel i5-6600K @ 4.2GHz, 16GB RAM MSI GTX970 Gaming 4G Win 10 Home Link to comment Share on other sites More sharing options...
Nate--IRL-- Posted June 3, 2010 Author Share Posted June 3, 2010 Ah, thank you, slightly odd mission design at fault then, I couldn't figure it out. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading Link to comment Share on other sites More sharing options...
jaeger_101 Posted June 4, 2010 Share Posted June 4, 2010 the target for the SU 24´s are some 100 meter off. Before flying go to the editor and move the assigned target right over the command post and you will get your mission success. Jaeger Link to comment Share on other sites More sharing options...
Nate--IRL-- Posted June 4, 2010 Author Share Posted June 4, 2010 Many thanks, I'll have a look at it later. It's nice to know it is the mission that is broken and not my ace combat skills :) Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading Link to comment Share on other sites More sharing options...
luza Posted June 12, 2010 Share Posted June 12, 2010 Nate, have you resolved your issue? was it one with the SU 24 SEAD escort mission? I have the same problem, thanks =) Luza [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
EvilBivol-1 Posted June 12, 2010 Share Posted June 12, 2010 Here are the fixed versions of missions 5, 6, 7. Just remove the "-2" at the end of the file name and drop it into your campaign folder. The other missions should be fine, IIRC. The entire campaign with fixes will be available for download soon. http://rapidshare.com/files/398313750/Over-the-Hump-5-6-7-EN.rar - EB [sIGPIC][/sIGPIC] Nothing is easy. Everything takes much longer. The Parable of Jane's A-10 Forum Rules Link to comment Share on other sites More sharing options...
luza Posted June 13, 2010 Share Posted June 13, 2010 ty evil [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Nate--IRL-- Posted June 13, 2010 Author Share Posted June 13, 2010 Ahh... many thanks Evil. I'd given up on it, but I'll get back in to it now. Thanks fir the fixes. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading Link to comment Share on other sites More sharing options...
tonym Posted July 4, 2010 Share Posted July 4, 2010 inserting a RAR file I have downloaded the file Over-the Hump -5-6-7-EN.rar, can't find a 2 to remove in this name and shouldn't it be a miz file? If not do I just drop it into the missions file or into the "en" section? Help gratefully received. TonyM Link to comment Share on other sites More sharing options...
Nate--IRL-- Posted July 4, 2010 Author Share Posted July 4, 2010 I have downloaded the file Over-the Hump -5-6-7-EN.rar, can't find a 2 to remove in this name and shouldn't it be a miz file? If not do I just drop it into the missions file or into the "en" section? Help gratefully received. TonyM You must open the RAR file with WinRAR or 7zip, the miz files are contained within. http://www.7-zip.org/ Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading Link to comment Share on other sites More sharing options...
tonym Posted July 4, 2010 Share Posted July 4, 2010 Thanks for quick reply. I have a standard install of Windows 7 and can't find WinRAR or 7zip. Where do I get them? Sorry if this is a dumb question but I am not very pc literate yet. Tonym Link to comment Share on other sites More sharing options...
nomdeplume Posted July 5, 2010 Share Posted July 5, 2010 He gave you the URL for 7-Zip... it's a completely free application which can handle almost all archive types. Highly recommended. Windows itself can only handle ZIP files. Link to comment Share on other sites More sharing options...
tonym Posted July 5, 2010 Share Posted July 5, 2010 Thanks again guys. I told you I was dumb. Now sorted! I will try mission 5 again and hope to progress. Link to comment Share on other sites More sharing options...
Rikus Posted July 5, 2010 Share Posted July 5, 2010 Here are the fixed versions of missions 5, 6, 7. Just remove the "-2" at the end of the file name and drop it into your campaign folder. The other missions should be fine, IIRC. The entire campaign with fixes will be available for download soon. http://rapidshare.com/files/398313750/Over-the-Hump-5-6-7-EN.rar Is this fixed in the DVD version? Greetings Link to comment Share on other sites More sharing options...
EvilBivol-1 Posted July 5, 2010 Share Posted July 5, 2010 Yes and you can also download the fixed version of the full campaign on the file exchange: http://files.lockon.ru/en/109/ - EB [sIGPIC][/sIGPIC] Nothing is easy. Everything takes much longer. The Parable of Jane's A-10 Forum Rules Link to comment Share on other sites More sharing options...
Rikus Posted July 5, 2010 Share Posted July 5, 2010 I have DVD version, so i don´t have to download it, correct? Greetings Link to comment Share on other sites More sharing options...
SVK_Fox Posted October 6, 2013 Share Posted October 6, 2013 Coul you please somebody upload that file (5th mission) on the web. :helpsmilie: Both previous links are dead. Thanks a lot. Link to comment Share on other sites More sharing options...
EvilBivol-1 Posted October 6, 2013 Share Posted October 6, 2013 http://www.digitalcombatsimulator.com/en/files/109/ - EB [sIGPIC][/sIGPIC] Nothing is easy. Everything takes much longer. The Parable of Jane's A-10 Forum Rules Link to comment Share on other sites More sharing options...
HiJack Posted October 6, 2013 Share Posted October 6, 2013 Thank you, will redo this campaign again. Does it run under FC3? Link to comment Share on other sites More sharing options...
HiJack Posted October 6, 2013 Share Posted October 6, 2013 If someone at ED just could add the action "Search Then Engage In Zone" to the "Pinpoint Strike" as it was in FC2 we would be good on many of the old missions! Link to comment Share on other sites More sharing options...
SVK_Fox Posted October 6, 2013 Share Posted October 6, 2013 Thank you so much. Anyway is it possible to update this mission to next patch? Could be helpfull. Link to comment Share on other sites More sharing options...
Kubiz Posted March 23, 2015 Share Posted March 23, 2015 Thanks for the solution. But it would be nice if you guys can repair that in the installation. I bought fc3 2015! And the mission is still screwed in the installation files... GIGABYTE Z390 GAMING X | i5 9600k @4.7 GHz | Noctua NH-U14S | MSI GeForce GTX 1070 Ti @OCed | Patriot 32GB DDR4 2666MHz | 1TB SSD + 1TB HDD | Win10 | Thrustmaster HOTAS Warthog + WarBRD | Saitek Pro Flight Rudder Pedals | 1440p AOC Q2790PQU Link to comment Share on other sites More sharing options...
nereal1978 Posted February 25, 2016 Share Posted February 25, 2016 after installing the files I'm getting the following error "cannot open file 1-3a.wav" any idea why? thanks Link to comment Share on other sites More sharing options...
Recommended Posts