Laro Posted September 6, 2013 Posted September 6, 2013 The "central position trimmer mode" doesn't work.
71st_Mastiff Posted September 6, 2013 Posted September 6, 2013 The "central position trimmer mode" doesn't work. works for me you set then let go and return to center to get control. "any failure you meet, is never a defeat; merely a set up for a greater come back", W Forbes. "Success is not final, failure is not fatal, it is the courage to continue that counts", "He who never changes his mind, never changes anything," Winston Churchill. MSI z690 MPG DDR4 || i9-14900k|| ddr4-128gb PC3200 |zotac RTX 5080|Game max 1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || G10 RGB EVGA Keyboard/MouseLogitech || PiMax Crystal VR || 32 Asus||
Laro Posted September 6, 2013 Author Posted September 6, 2013 (edited) Edit: Reinstalled DCS, configured everything new...still doesn't work. When i release the trim button without centering the controller i get double input in DCS. Edited September 6, 2013 by Laro
sLYFa Posted September 6, 2013 Posted September 6, 2013 same for me i5-8600k @4.9Ghz, 2080ti , 32GB@2666Mhz, 512GB SSD
IonicRipper Posted September 20, 2013 Posted September 20, 2013 Same here i5 4590 @ 3.77GHz | GTX 1060 6GB | 16GB 1600MHz DDR3 | 1TB HDD+500GB HDD | Win10 Home X64 [sIGPIC][/sIGPIC]
Cibit Posted September 20, 2013 Posted September 20, 2013 I have seen some odd behaviour with trim and joystick axis but figured it was me:music_whistling: i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
Speacy Posted September 22, 2013 Posted September 22, 2013 Same here, no answer from Belsimtek team? [sIGPIC]http://355th.fr/public/style_images/Speacy.png[/sIGPIC]
Lilkiki Posted September 28, 2013 Posted September 28, 2013 Same here as well. Central trimmer mode works on all other chopper module, except Mi-8 ... :( :joystick::joystick::joystick: [sIGPIC][/sIGPIC]
silverofx441 Posted October 1, 2013 Posted October 1, 2013 Same here, no dice. Intel i5 2500K 4.2 Ghz GTX560 Ti Twin Frozr ii 16 Gb DDR3 RAM Win 7 64 bit [sIGPIC][/sIGPIC]
sondo214 Posted October 11, 2013 Posted October 11, 2013 (edited) For me does not work either the rudder trimer nor the central position. Whenever I press the trim button, only the cyclic stays wherever is at the point of button release. Pedal input returns to center when I release the rudder (due to pedals spring). They work perfectly with UH-1, with the same setup, axis assingments, buttons and settings for rudder trim. Edited October 11, 2013 by sondo214
lorenzoj Posted October 11, 2013 Posted October 11, 2013 If I have the Yaw Channel on, the rudder pedal in the cockpit view stays where I have it when I hit "Trim"
lorenzoj Posted October 11, 2013 Posted October 11, 2013 I don't know what to say guys. I just went into DCS, set the Rudder Trim option on, went into a flight and with the Yaw Channel OFF, when I hit "Trim" the in cockpit rudder pedals stay right where I have them and return to that spot until I re-trim or clear trim. I didn't try with the Yaw Channel ON yet. Although I think that if you are going to be manually trimming the rudder you might want that off anyway ?
Dr_Arrow Posted October 11, 2013 Posted October 11, 2013 I don't know what to say guys. I just went into DCS, set the Rudder Trim option on, went into a flight and with the Yaw Channel OFF, when I hit "Trim" the in cockpit rudder pedals stay right where I have them and return to that spot until I re-trim or clear trim. I didn't try with the Yaw Channel ON yet. Although I think that if you are going to be manually trimming the rudder you might want that off anyway ? Yes, the yaw channel of autopilot has nothing to do with trim.
lorenzoj Posted October 11, 2013 Posted October 11, 2013 Yes, the yaw channel of autopilot has nothing to do with trim. Yeah... but sometimes you get interesting and unexpected results in a sim program when you try these things anyway.... But it seems that at least Sondo's problem was due to the use of an FFB controller as you pointed out
59th_Spy Posted January 27, 2014 Posted January 27, 2014 HI! I have problem with trimmer on 1.2.7. It is dont operating, I push the " T " for the trimming, but dont do anything. Experiences?
59th_Spy Posted January 28, 2014 Posted January 28, 2014 HI! I have problem with trimmer on 1.2.7. It is dont operating, I push the " T " for the trimming, but dont do anything. Experiences? My problem is solved! It was my fault. :poster_oops:
Recommended Posts