DCS World TARGET profile for TM Cougar and Warthog + MFDs

[Home Fries]

Quote

 

Yes I did define BTN30, BTN31 and BTN32 as modifiers in the F16 settings in DCS. 

Some of the buttons do create keyboard events, however I went to check in DCS what is expected for the Canopy open/Close to be pressed.

It has the LCRL-C+ BTN30 bound to it. When I test the keyboard events, I see no events when holding down Btn30 and pressing the NWS button.

I also don't get an event when pressing the trigger to the first detent... On the other hand the hats are giving keyboard events.

 

This is interesting (not in a good way).  TG1 should return DX1, and S3+S5 (NWS) should generate LCTL+C (with DX30).

 

What is normal is that Hats 3 and 4 do map to keyboard combinations.  Hat 1 should map to mouse based on the VR selection you have, and TMS should map to DX7-10.

 

The logfile says that you're using a Warthog stick with a Cougar throttle.  Have you tried this with your Cougar stick, and not the warthog?

Edited December 21, 2020 by Home Fries

[DaveMoi]

HI Home Fries,

 

My warthog stick is actually the warthog magnetic base with the cougar stick mounted to it. My cougar’s stick pots died. As I was unable to find replacements pots for it here locally, I decided to go with the warthog magnetic base and recuperate the cougar stick that way. I mounted the electronics from the cougar in a smalle box which allows me to continue using the cougar’s TQS throttle. Do even though the cougar Hotas is recognized, only the throttle is actually present.

[Home Fries]

1 hour ago, DaveMoi said:

HI Home Fries,

 

My warthog stick is actually the warthog magnetic base with the cougar stick mounted to it. My cougar’s stick pots died. As I was unable to find replacements pots for it here locally, I decided to go with the warthog magnetic base and recuperate the cougar stick that way. I mounted the electronics from the cougar in a smalle box which allows me to continue using the cougar’s TQS throttle. Do even though the cougar Hotas is recognized, only the throttle is actually present.

I know the pots are dead, but could you please try reattaching the cougar stick to the cougar base and running the profile with WarthogStick = 0?  This will at least eliminate a variable, as your configuration is not one I can truly support.

 

If the buttons work on the Cougar base, then at least we know it's the Warthog base/Cougar stick that is likely the issue.

[DaveMoi]

I would love to try that but unfortunately that's not possible anymore as the electronics have been removed from the cougar's joystick base and integrated into the playseat to allow the TQS to work. Using the Warthog base with the cougar stick basically makes it a Warthog stick, it's recognized as that as well. When I use DCS in "standard" configuration, the buttons on my stick are auto-configured as the should be. Do you think there could be a setting in Target itself that might be wrong?

[Home Fries]

1 hour ago, DaveMoi said:

Do you think there could be a setting in Target itself that might be wrong?

Could be.  Please post your dcs_world.tmc file so I can review it.

[Wolf359]

19 hours ago, Home Fries said:

TARGET natively only recognizes two MFDs.  However, MFD3 will be recognized as a controller separate from the TARGET profile.  Fortuitously, I have also created diff.lua files for a 3rd MFD for quite a few profiles in CTS, the Hornet being one of them.

 

I think it's high time I check out your script, buddy!

[DaveMoi]

//========================================================================
//                DCS World for HOTAS Cougar/Warthog and Cougar MFDs
//                    by Don "Home Fries" Heumphreus
//                   Template last changed: 28APR2020
//              (Personalization Parameters last updated 2.52)
//
//            Autogenerated by Configurator TARGET Script (CTS) GUI
//            See index.html in the CTS GUI for the latest change log
//
//========================================================================


int MajorVersion = 2;
int MinorVersion = 52;

int Script_Debug = 0;                //Set to 1 to allow verbose debugging.

//-----------------------------------
//    Included Headers and Code files
//-----------------------------------

//Common Headers and Code
include "target.tmh"            
include "Common/util_usb.tmh"        //header by ivanwfr that adds better aliases for USB keystrokes
include "Common/MFD_Lights.tmc"        //functions that use lower level LED calls than ActKey
include "Common/WH_Lights.tmc"        //functions that use lower level LED calls than ActKey

//Include Macros before DCS Specific Files
include "DCS_UserSettings.ttm"        //User customizable macro file
include "DCS/DCS World.ttm"            //macro file
include    "IL2/IL2GB.ttm"                //IL-2 Sturmovik macro file
include    "Elite/EliteD.ttm"            //Elite: Dangerous macro file

//Include Code after Macros
include "DCS/DCS_SelMod.tmc"
include "DCS/DCS_Init.tmc"
include "DCS/DCS_Global_Subs.tmc"
include "DCS/CommState.tmc"
include    "DCS/CommState_WH.tmc"        //separate file so that the two can be compared side by side.


//Include should show all modules available for this profile.
include "DCS/Modules/DCS_DX.tmc"
include "DCS/Modules/DCS_FC3.tmc"
include "DCS/Modules/DCS_A10C.tmc"
include "DCS/Modules/DCS_BS2.tmc"
include "DCS/Modules/DCS_P51D.tmc"
include "DCS/Modules/DCS_UH1.tmc"
include "DCS/Modules/DCS_MI8.tmc"
include "DCS/Modules/DCS_F86.tmc"
include "DCS/Modules/DCS_Fw190.tmc"
include "DCS/Modules/DCS_MiG21.tmc"
include "DCS/Modules/DCS_Bf109.tmc"
include "DCS/Modules/DCS_MiG15.tmc"
include    "DCS/Modules/DCS_MiG19.tmc"
include "DCS/Modules/DCS_L39.tmc"
include "DCS/Modules/DCS_M2000C.tmc"
include "DCS/Modules/DCS_SA342.tmc"
include    "DCS/Modules/DCS_F5E.tmc"
include "DCS/Modules/DCS_Spitfire.tmc"
include    "DCS/Modules/DCS_AJS37.tmc"
include    "DCS/Modules/DCS_AV8B.tmc"
include    "DCS/Modules/DCS_C101.tmc"
include    "DCS/Modules/DCS_FA18C.tmc"
include    "DCS/Modules/DCS_A4E_C.tmc"
include "DCS/Modules/DCS_AWACS.tmc"
include "DCS/Modules/DCS_F14.tmc"
include "DCS/Modules/DCS_F16C.tmc"
include    "DCS/Modules/DCS_I16.tmc"
include "DCS/Modules/DCS_MB339.tmc"
include "DCS/Modules/DCS_JF17.tmc"
include    "IL2/IL2GB.tmc"                    //IL-2 Sturmovik Great Battles
include    "Elite/EliteD.tmc"                //Elite: Dangerous

//Early Variable Declarations
int Init_Run;        //set to 1 for first run of profile; 0 for hot loads.

int    Comm_Sw_Up;
int    Comm_Sw_Lt;
int    Comm_Sw_Dn;
int    Comm_Sw_Rt;
int    CougarToeBrakes;    //added in 1.40

//End Header




//=========================================
// Script Baseline
//=========================================
alias MFDisp_CTSProf="CTSProf";
int KBPress_IL2GB=75;
int ModDelay_IL2GB=25;
alias MFDisplayExe="MFD4CTS.exe";
alias MFDisplayPath="C:\\Program Files (x86)\\Vyper Industries\\MFD4CTS";
int Switch_Delay=200;
int LED_Delay=50;
int ModDelay=10;
int KBDelay=60;
int KBPress=50;
int PathLength=79;
alias ScriptPath="C:\\Users\\David\\Documents\\TARGET Profiles\\CTS";




//=========================================
// Hardware Configuration
//=========================================
int VRBrakeProfileSwap=1;
int ForceVRCycle=1;
int Mouse_Scale_IL2TC=-10;
int Mouse_Curve_J_IL2TC=5;
int Mouse_Delay_H1_IL2TC=200;
int Mouse_Incr_H1_IL2TC=1;
int Mouse_Zdelay_H1=10;
int Mouse_Zincr_H1=50;
int Stick_as_Mouse_IL2TC=1;
int HornetStick=0;
int Mouse_Y_Rev=0;
int Mouse_Delay_H1=20;
int Mouse_Incr_H1=80;
int Mouse_Scale_T=0;
int Mouse_Curve_J=0;
int Mouse_DZ_WHT=5;
int Mouse_DZ_TQS=1;
int Mouse_DZ_WHS=1;
int Mouse_DZ_FLCS=2;
int Stick_as_Mouse_AWACS=0;
int MFD_Count=0;
int WH_AB_DetentHigh_L=66;
int WH_AB_DetentLow_L=65;
int WH_AB_DetentHigh_R=66;
int WH_AB_DetentLow_R=65;
int WH_AB_Detent_Enabled=0;
int IdleDetentHigh=14;
int IdleDetentLow=7;
int ThrottleMin=0;
int ThrottleMax=100;
int VRTrimDefault=0;
int TrackIR=2;
int RudderPedals=0;
int WarthogThrottle=0;
int WarthogStick=1;




//=========================================
// Default Initial Configuration
//=========================================
int HVSound=1;
int Fw190D9_Installed=1;
int Fw190A8_Installed=1;
int MFDisplay_Submod_Enabled=1;
int VAICOM_ICS_Delay=KBDelay;
int VAC_AIRIO=0;
int LATC_Default_AWACS=0;
int MFDisplay_HV=0;
int MFDisplayEnabled=0;
int Scratchpad_Enabled=0;
int VACChatter=0;
int GearDnTempo=1000;
int GearUpTempo=500;
int SwapTempo=2000;
int LongTempo=800;
int DoubleTap=350;
int ModTempo=300;
int DefTempo=500;
int VRMouseWheelRate=100;
int XYAxisTrim_Rate=100;
int VAC=0;
int Speech_on_Cycle=1;
int LED_Enable_on_Cycle=1;
int Acft_Sel_Skip_Mult=5;
int P47D_Installed=1;
int CVN_Installed=1;
int CE2_Installed=0;
int Yak52_Installed=0;
int JF17_Installed=0;
int MB339_Installed=0;
int I16_Installed=0;
int MiG19_Installed=0;
int IL21946_Installed=0;
int F16C_Installed=1;
int FC3_Installed=0;
int F4BMS_Installed=0;
int EliteD_Installed=1;
int IL2BoS_Installed=1;
int F14_Installed=0;
int CA_Installed=0;
int A4EC_Installed=0;
int NS430_Installed=0;
int FA18C_Installed=1;
int AV8B_Installed=0;
int C101_Installed=0;
int SpitLFIX_Installed=0;
int M2000C_Installed=0;
int Hawk_Installed=0;
int F86_Installed=0;
int AJS37_Installed=0;
int F15C_Installed=1;
int A10C_Installed=0;
int A10A_Installed=1;
int F5E_Installed=1;
int SA342_Installed=0;
int UH1_Installed=0;
int Fw190_Installed=0;
int Bf109_Installed=0;
int L39_Installed=0;
int MiG29_Installed=1;
int Su33_Installed=1;
int Su27_Installed=1;
int MiG21_Installed=0;
int MiG15_Installed=0;
int Ka50_Installed=0;
int Mi8_Installed=0;




//============================================
// Script Personalization
//============================================
int PlayWavStnChangeDelay=450;
int NS430_Enabled_P47D=1;
int Starter_Ind_P47D=15000;
int Gear_Retract_P47D=18000;
int Gear_Deploy_P47D=13000;
int TMStick_UH1=1;
int Rdo_LED_AWACS=1;
int Overlay_Enable_SRS=1;
int H4P_SCSP_AV8=0;
int PTT_ForceDX_FA18C=1;
int Disable_Aux_MFD_F16C=0;
int Disable_IFC_MFD_F16C=0;
int WHTFlash_F16C=0;
int H4P_SCSP_F18=0;
int Force_VAC_S2_BS2=0;
int CMProg_H4DS_M2000C=6;
int CMProg_H4US_M2000C=5;
int CMProg_H4DL_M2000C=3;
int CMProg_H4UL_M2000C=1;
int CMProg_H4L_M2000C=4;
int CMProg_H4R_M2000C=2;
int WHTFlash_JF17=1;
int JoyYTrim_IL2=6;
int JoyXTrim_IL2=6;
int XYAxisTrim_IL2=1;
int H2_Dobber_JF17=1;
int MFD_Rocker_JF17=0;
int DefaultStation_L39=1;
int DefaultStation_C101=1;
int DefaultStation_F14=1;
int DefaultStation_MB339=1;
int StnCheckDisabled_L39=0;
int StnCheckDisabled_C101=0;
int StnCheckDisabled_F14=0;
int StnCheckDisabled_MB339=0;
int MSP_IFF_JF17=1;
int Airbrake_Type_JF17=2;
int Adjust_Backlight_JF17=0;
int Starter_Ind_JF17=0;
int Eng_Stop_JF17=0;
int Eng_Start_JF17=0;
int WH_Use_TQS_JF17=0;
int NS430_Enabled_JF17=1;
int Airbrake_Out_JF17=4500;
int Airbrake_In_JF17=4500;
int Gear_Retract_JF17=9500;
int Gear_Deploy_JF17=9500;
int Analog_TDC_DX=1;
int NS430_Enabled_F16C=0;
int TID_Discrete_F14=1;
int DirectEntry_F18=1;
int DirectEntry_AV8=1;
int Scan_Bar_Set_M2000C=0;
int Scan_Width_Set_M2000C=0;
int WH_Use_TQS_F16C=0;
int NS430_Enabled_MB339=1;
int Airbrake_Out_MB339=1500;
int Airbrake_In_MB339=1500;
int Gear_Retract_MB339=2000;
int Gear_Deploy_MB339=2000;
int Subsystem_Cycle_EliteD=100;
int Ant_Steps_EliteD=21;
int Adjust_Backlight_MiG19=0;
int PlayWavEng_I16=1;
int Custom_Master_LUA_I16=0;
int JoyYTrim_I16=6;
int JoyXTrim_I16=6;
int XYAxisTrim_I16=1;
int GearCheck_I16=0;
int NS430_Enabled_I16=1;
int Gear_Retract_I16=60000;
int Gear_Deploy_I16=60000;
int Mil_Delay_MiG19=2500;
int Force_GearLock_MiG19=0;
int NS430_Enabled_MiG19=1;
int Airbrake_Out_MiG19=1;
int Airbrake_In_MiG19=1500;
int Gear_Retract_MiG19=12000;
int Gear_Deploy_MiG19=12000;
int EmerJett_Cycle_Delay=1000;
int BS_Flaps_IL2GB=0;
int MixH_IL2GB=80;
int MixL_IL2GB=30;
int MFD_StDelay_F16C=3000;
int Starter_Ind_F16C=19000;
int Eng_Stop_F16C=1;
int Eng_Start_F16C=1;
int MPO_Rev_F16C=0;
int Adjust_Backlight_F16C=0;
int Airbrake_Out_F16C=1500;
int Airbrake_In_F16C=1500;
int Gear_Retract_F16C=12000;
int Gear_Deploy_F16C=12000;
int IgnRelDelay_IL2GB=5000;
int GearDn_Ind_Default_IL2=1;
int PlayWavEng_IL2GB=1;
int Starter_Ind_Fw190A8=30000;
int WHT_IGN_Start_F5E=0;
int DefaultCM_EliteD=1;
int AB_Delay_Max_EliteD=10000;
int AB_Delay_Min_EliteD=2000;
int AB_Delay_Adj_Elite=1000;
int AB_Delay_EliteD=5000;
int Microstick_Mouse_EliteD=1;
int Mouse_Scale_HT_EliteD=-7;
int ABLo_EliteD=70;
int ABHi_EliteD=85;
int AB_Throttle_EliteD=0;
int HornetStick_Default=0;
int Boat_MM_FA18C=0;
int DF_MM_AV8=0;
int TQS_RNG_IL2GB=1;
int CombatThrottle_IL2GB=75;
int Real_Jett_A4EC=1;
int EmerFlapRetract_AV8=12000;
int DF_MA_F14=0;
int MFD_GSD_F14=0;
int Discrete_ICS_F14=0;
int FuelDump_Rev_F14=0;
int APU_GndAir_Delay_F14=5000;
int APU_GndAir_F14=0;
int Discrete_WepSel_F14=1;
int Discrete_NavLts_F14=1;
int LANTIRN_Enable_F14=1;
int Starter_Ind_F14=19000;
int Eng_Stop_F14=5000;
int NS430_Enabled_F14=1;
int Airbrake_Out_F14=2500;
int Airbrake_In_F14=500;
int Gear_Retract_F14=13000;
int Gear_Deploy_F14=12500;
int WH_Throttle_Detent_Posit_AV8=85;
int WH_Throttle_Detent_AV8=0;
int Throttle_Cutoff_Delay_AV8B=1000;
int Starter_Ind_C101=10000;
int PauseTIR_CA=0;
int Rev_CS_Zoom_CA=0;
int TDC_Hold_F18=0;
int Discrete_NavSwitches_A4EC=1;
int NS430_Enabled_A4EC=1;
int Airbrake_Type_A4EC=1;
int Airbrake_Out_A4EC=500;
int Airbrake_In_A4EC=2500;
int Gear_Retract_A4EC=9000;
int Gear_Deploy_A4EC=6500;
int S4Brake_USN=1;
int RCON_Context_F18=1;
int JHMCS_Full_Motion_FA18C=1000;
int PauseTIRGunner_Mi8=1;
int PauseTIRGunner_SA342=0;
int PauseTIRGunner_UH1=0;
int WH_Friction_FOV=1;
int Eng_Stop_UH1=1000;
int WH_LT_Throttle_SA342=0;
int WH_LT_Throttle_UH1=0;
int NS430_Enabled_AV8B=1;
int NS430_Enabled_C101EB=1;
int NS430_Enabled_SpitLFIX=1;
int NS430_Enabled_P51D=1;
int NS430_Enabled_M2000C=1;
int NS430_Enabled_F86=1;
int NS430_Enabled_AJS37=1;
int NS430_Enabled_F15C=1;
int NS430_Enabled_A10A=1;
int NS430_Enabled_F5E=1;
int NS430_Enabled_SA342M=1;
int NS430_Enabled_SA342L=1;
int NS430_Enabled_UH1=1;
int NS430_Enabled_Fw190=1;
int NS430_Enabled_Bf109=1;
int NS430_Enabled_L39ZA=1;
int NS430_Enabled_L39C=1;
int NS430_Enabled_J11A=1;
int NS430_Enabled_MiG29=1;
int NS430_Enabled_Su33=1;
int NS430_Enabled_Su27=1;
int NS430_Enabled_Su25=1;
int NS430_Enabled_MiG21=1;
int NS430_Enabled_MiG15=1;
int NS430_Enabled_Mi8=1;
int Starter_Ind_FA18C=20000;
int Adjust_Backlight_FA18C=0;
int Airbrake_Out_FA18C=3500;
int Airbrake_In_FA18C=3500;
int Gear_Retract_FA18C=9000;
int Gear_Deploy_FA18C=9000;
int AirbrakeType_F15C=2;
int AirbrakeSwap_F15C=0;
int VAC_DisableCommSuppAir_F5E=0;
int SuppressWavInit=0;
int Airbrake_Out_C101=1500;
int Airbrake_In_C101=1500;
int Gear_Retract_C101=4000;
int Gear_Deploy_C101=4000;
int TG1ZoomReset=0;
int STO_Stop_Increment_AV8B=3;
int Custom_Master_LUA_AV8B=0;
//int WH_104_AV8B=94;
//int WH_103_AV8B=93;
//int WH_102_AV8B=92;
//int WH_101_AV8B=91;
//int WH_100_AV8B=90;
int WH_LED_AV8B=0;
int WH_IdleStop_AV8B=0;
int STO_Stop_Rate_AV8B=200;
int Adjust_Backlight_AV8B=0;
int Airbrake_Out_AV8B=1500;
int Airbrake_In_AV8B=1500;
int Gear_Retract_AV8B=4000;
int Gear_Deploy_AV8B=4000;
int TG1ZoomPoll=50;
int WepsSel_Array_MiG21=0;
int AB_Capable_DX=0;
int NVG_Capable_DX=0;
int FlapType_DX=0;
int Afterburner_DX=0;
int DMS_SnapView_DX=0;
int JoyYTrim_DX=6;
int JoyXTrim_DX=6;
int XYAxisTrim_DX=1;
int WheelBrakeFull_DX=1;
int AnalogPaddleBrake_DX=0;
int AnalogBrake_DX=0;
int DiffBraking_DX=0;
int Airbrake_Def_DX=3;
int Fixed_Gear_DX=0;
int CenterPositRudder_DX=1;
int Helicopter_DX=0;
int Airbrake_Out_DX=500;
int Airbrake_In_DX=2000;
int Gear_Discrete_DX=0;
int Gear_Transit_DX=3000;
int Starter_Ind_DX=30000;
int Eng_Stop_DX=5000;
int Eng_Start_DX=10000;
int Eng_Quantity_DX=2;
int Complex_Comm_DX=0;
int Priming_Rate_Spit=500;
int Adjust_Backlight_Spit=0;
int Gear_Retract_Spit=12000;
int Gear_Deploy_Spit=7000;
int WH_Flap_Cycle_Rate=500;
int Gear_Retract_P51D=12000;
int Gear_Deploy_P51D=7000;
int Starter_Ind_P51D=0;
int Adjust_Backlight_Fw190=0;
int Gear_Retract_Fw190=6500;
int Gear_Deploy_Fw190=6000;
int Force_GearLock_Fw190=0;
int Starter_Ind_Fw190=20000;
int Priming_Rate_Bf109=500;
int Adjust_Backlight_Bf109=0;
int Gear_Retract_Bf109=7000;
int Gear_Deploy_Bf109=5500;
int Force_GearLock_Bf109=0;
int Adjust_Backlight_M2000C=0;
int ParkBrake_EngSt_M2000C=1;
int MasterArm_Both_M2000C=1;
int Airbrake_Out_M2000C=2000;
int Airbrake_In_M2000C=2000;
int Airbrake_Type_M2000C=0;
int Gear_Retract_M2000C=5000;
int Gear_Deploy_M2000C=5000;
int UseDiscrete_F86=1;
int Airbrake_Out_F86=2500;
int Airbrake_In_F86=3000;
int Gear_Retract_F86=8500;
int Gear_Deploy_F86=6500;
int PreStarter_Ind_F86=60000;
int Starter_Ind_F86=60000;
int Nav_Warn_AJS37=1;
int WH_AB3_AJS37=95;
int WH_AB2_AJS37=82;
int Airbrake_Out_AJS37=500;
int Airbrake_In_AJS37=2500;
int Gear_Retract_AJS37=8000;
int Gear_Deploy_AJS37=8000;
int Starter_Ind_AJS37=0;
int Adjust_Backlight_A10C=0;
int Airbrake_Out_A10C=3500;
int Airbrake_In_A10C=2000;
int Gear_Retract_A10C=8000;
int Gear_Deploy_A10C=6500;
int Starter_Ind_A10C=33000;
int Eng_Stop_A10C=5000;
int Eng_Start_A10C=40000;
int ClearComms_Delay_F5E=2*KBDelay;
int NWS_ClearComms_F5E=0;
int Adjust_Backlight_F5E=0;
int Chaff_Default_F5E=2;
int Flare_Default_F5E=1;
int Airbrake_Out_F5E=2000;
int Airbrake_In_F5E=2000;
int Gear_Retract_F5E=7500;
int Gear_Deploy_F5E=5000;
int Eng_Stop_F5E=5000;
int TQS_Idle_Delay_F5E=800;
int Starter_Ind_F5E=35000;
int WH_L39C_LCON_Dynamic=0;
int Airbrake_Out_L39=2000;
int Airbrake_In_L39=2000;
int Airbrake_Type_L39=2;
int Gear_Retract_L39=5000;
int Gear_Deploy_L39=5000;
int Discrete_ASP_MiG21=1;
int Airbrake_Out_MiG21=500;
int Airbrake_In_MiG21=2500;
int Airbrake_Type_MiG21=1;
int Gear_Retract_MiG21=6000;
int Gear_Deploy_MiG21=7000;
int Force_GearLock_MiG21=0;
int IdleDetent_MiG21=1;
int MiG15_Flap20_Delay=2000;
int Airbrake_Out_MiG15=1;
int Airbrake_In_MiG15=3500;
int Airbrake_Type_MiG15=0;
int Gear_Retract_MiG15=11000;
int Gear_Deploy_MiG15=13000;
int Force_GearLock_MiG15=0;
int Armament_EOP_SA342=1;
int Adjust_Backlight_SA342=0;
int CenterPositRudder_SA342=1;
int Adjust_Backlight_UH1=0;
int CenterPositRudder_UH1=1;
int Int_PVT_CommState=1;
int Int_PVT_HotMic=0;
int TG2_PTT_LED=0;
int TG2_Radio_Only_UH1=0;
int TG1_AutoCommMenu=0;
int UH1_RealRadioTrigger=0;
int UH1_XM60_Track=1;
int Starter_Ind_UH1=40000;
int BS2_Trim_Neutral_Offset=234;
int CenterPositRudder_BS2=1;
int BS2_RotorBrake_Default=1;
int BS2_PVI_CommState=0;
int BS2_ForceCommStateOff=1;
int BS2_DiscreteCommState=0;
int Gear_Retract_BS2=10000;
int Gear_Deploy_BS2=7000;
int Starter_Ind_BS2=40000;
int CenterPositRudder_Mi8=1;
int UV26_LED_Duration=600;
int Mi8_AP_MFD_LED=1000;
int Mi8_AP_MFD_Context=1;
int Custom_Master_LUA_F86=0;
int Custom_Master_LUA_UH1=0;
int Custom_Master_LUA_FC3=1;
int DragChuteLEDTime=10000;
int Adjust_Backlight_FC3=0;
int Airbrake_Def_A10A=1;
int Airbrake_Def_FC3_Ru=1;
int Airbrake_Out_F15C=2000;
int Airbrake_In_F15C=5000;
int Airbrake_Out_FC3=500;
int Airbrake_In_FC3=1500;
int Gear_Transit_FC3=3000;
int Starter_Ind_FC3=35000;
int Eng_Stop_FC3=5000;
int Eng_Start_A10A=60000;
int Eng_Start_FC3=10000;
int TG1ZoomOutDelay=1500;
int TG1Zoom=700;
int PositionSwitchComms=0;
int CommStateAllow=1;
int TS3_DX=1;
int TS3_ExtRadio_Keys=0;
int TS3_Radio_PTT_Common=0;
int TS3_Radio=0;
int CenterPositMapDelay=500;
int CenterPositZone=2000;
int CenterPositRelTempo=300;
int CenterPositTempo=500;
int CenterPositTrimmer=50;
int Engine_Shutdown_Ind_Time=4500;
int GearDn_Ind_Default=1;
int MFD_Default_Setting=2;
int MFD_Lt_Day=140;
int MFD_Lt_Night=60;
int MFD_Lt_Off=2;
int AirBrkFlash=1;
int RuH_WH_Throttle_Delay=1000;
int RuH_WH_Throttle_Discrete=1;
int Helo_Microstick_Offset=-45;
int Microstick_Offset=0;
int ThrottleShutdownDelay=2000;
int PauseTIRGunner=0;
int PadlockEnabled=1;
int AnalogBrake_Warbird=1;
int AnalogBrake_Helo=0;
int AnalogPaddleBrake=0;
int NWSwithBrake=0;
int JoyYParkingBrake=1;
int DiffBraking_Enabled=1;
int Helo_Throttle_Rev=1;
int RevANTRudder=1;





//This begins the Cougar Comm Switch mapping routine, where you logically map T2-T5 to the Mic Switch on the A-10C Warthog throttle.  Mapping is customizable, and applies to A-10C and FC3.

int SetCommSw()        //***do not edit***
{                    //***do not edit***

//Comm_Sw is the Cougar Switch, Mic_Sw is the equivalent switch on the Warthog (mounted on the right side of the throttle).
//Since Mic_Sw_Up on the A-10C doesn't have a function, this suffices as the regular or common Push to Talk on TeamSpeak 3.

//Can change these for personal preference.  Just be sure that each Mic_Sw_xxx is mapped exactly once. Be sure each line ends with a semicolon as well.



if (WarthogThrottle > 0)    //do not modify (WH settings)
    {
    Comm_Sw_Dn    =    Mic_Sw_Dn;        
    Comm_Sw_Up    =    Mic_Sw_Up;        
    Comm_Sw_Rt    =    Mic_Sw_Fwd;        
    Comm_Sw_Lt    =    Mic_Sw_Aft;        
    }
else
    {
//============================================
// Only change this for Cougar Comm Switch
//============================================
Comm_Sw_Dn=Mic_Sw_Dn;
Comm_Sw_Up=Mic_Sw_Up;
Comm_Sw_Rt=Mic_Sw_Aft;
Comm_Sw_Lt=Mic_Sw_Fwd;



    }
    
}    


//============================================
// Constants (should not be changed)
//============================================
int F14_Custom_LUA=0;
int VTB_Sw_M2k=1;
//int StnCheckDisabled_CE2=2;
//int StnCheckDisabled_Yak52=2;
//int Gear_Retract_Yak52=6000;
//int Gear_Deploy_Yak52=7000;
//int Adjust_Backlight_CE2=0;
//int NS430_Enabled_CE2=1;
//int NS430_Enabled_Yak52=1;
int TrackIR_Index_Max=4;
int TrackIR_Index=TrackIR+1;
int I16_Custom_LUA=Custom_Master_LUA_I16;
int Mix_Adj_IL2GB=5;
int WHTLeft_Enable_IL2TC=0;
int Microstick_Mouse_IL2GB=0;
int CombatThrottleWavDelay_IL2GB=1500;
int CombatThrottle_Adj_IL2GB=5;
//int AIRIO_F14=1;
//int Strut_Kneel_Time_F14=10000;
int MiG29PathEnabled=0;
//int NS430_Enabled_C101CC=NS430_Enabled_C101EB;
//int NS430_Enabled_Hawk=1;
int AV8B_Custom_LUA=Custom_Master_LUA_AV8B;
int WAV_PlayBatch=0;
int WH_SC_SetRange=0;
int SPU9_BS2=1;
int Eng_Start_Su27=Eng_Start_FC3;
int Swap_UR_MicSw=1;
int UR_ER=TS3_ExtRadio_Keys;
int TARS_PTT_Common=TS3_Radio_PTT_Common;
int TARS=TS3_Radio;
int BS2_StarterDelay=3500;
int CPTM_Flash=250;
int AirBrakePoll=500;
int AJS37_Custom_LUA=1;
int SpitLFIX_Custom_LUA=0;
int MiG21_Custom_LUA=0;
int Bf109_Custom_LUA=0;
int Fw190_Custom_LUA=0;
int F86_Custom_LUA=Custom_Master_LUA_F86;
int Mi8_Custom_LUA=0;
int UH1_Custom_LUA=Custom_Master_LUA_UH1;
int P51D_Custom_LUA=0;
int A10C_Custom_LUA=0;
int BS2_Custom_LUA=0;
int FC3_Custom_LUA=Custom_Master_LUA_FC3;
int Discrete_Array_MiG21=0;
int BS2_UV26_Side_Start=0;
int Mi8_UV26_Side_Start=0;
int BS2_Eng_Sel_Sw_Start=1;
int Mi8_Eng_Sel_Sw_Start=1;
int Mi8_ICS_Start=0;
int UH1_ICS_Start=0;
int Fw190_Sight_Offset=0;
//int Radar_Export_M2000C=0;
//int Airbrake_Out_Hawk=2500;
//int Airbrake_In_Hawk=3000;
//int Airbrake_Type_Hawk=1;
//int Gear_Retract_Hawk=8500;
//int Gear_Deploy_Hawk=6500;
//int PreStarter_Ind_Hawk=30000;
//int Starter_Ind_Hawk=30000;
int Discrete_AP_SA342=0;


//    alias DCSFPPath=&ScriptPath;
//    alias DCSFPFilePath=&ScriptPath;
//    int DCSFPPathLength=PathLength;
//    int DCSFPFilePathLength=PathLength;
int DCSFP_Enabled=0;


int HOTAS_Cougar_Button_Init()    
{
//============================================
// Default Menu and Profile Init
//============================================
SetMenu_F16C();
SetMenu_MiG29();
SetMenu_P47D();
DCS_F16C_Init();


}

//Begin Footer (static code)

int main()
{
SetCSVAC();    //determines whether CommState runs with VAICOM Pro.
    
if (TrackIR_Index > TrackIR_Index_Max) TrackIR_Index = TrackIR_Index_Max;    //error trap

//Init Declarations.
SetKBRate(KBPress, KBDelay);        //constants moved to personalization section in 0.70.

Configure(&T16000,MODE_EXCLUDED);
Configure(&T16000L,MODE_EXCLUDED);
Configure(&TWCSThrottle,MODE_EXCLUDED);
Configure(&TFRPRudder,MODE_EXCLUDED);
Configure(&TFRPHARudder,MODE_EXCLUDED);

if (    (WarthogStick > 0) & (WarthogThrottle == 1) & (RudderPedals == 0)    ) Configure(&HCougar,MODE_EXCLUDED);    //added in 1.66; frees cougar rudders if WH HOTAS enabled
if (!WarthogStick)         Configure(&Joystick,MODE_EXCLUDED);    //added in 1.67
if (!WarthogThrottle)     Configure(&Throttle,MODE_EXCLUDED);    //added in 1.67
if (!HornetStick)        Configure(&JoystickF18,MODE_EXCLUDED);    //added in 2.40
if (MFD_Count < 2)                                            //added in 2.20 for troubleshooting, modified in 2.42 to force exclusion with low MFD_Count
    {
    if (MFD_Count < 1) Configure(&LMFD,MODE_EXCLUDED);
    Configure(&RMFD,MODE_EXCLUDED);
    }    
//End Declarations


if(Init(&EventHandle)) return 1; // declare the event handler, return on error
if ((RudderPedals > 1) & (AirBrkFlash > 0))    AirBrkFlash = 0;    //added in 1.31, modified in 2.05

//if (    (WarthogStick > 0)    &    (RudderPedals == 1)    &    (DiffBraking_Enabled > 2)    )    //added in 1.40
//        {
//        CougarToeBrakes     =     1;
//        JoyYParkingBrake    =    0;        //    If enabled, holding Joy Y all the way back and releasing S4 will set the parking brake (or lock the axis in place if no parking brake command).  S4+JoyY to release.
//        NWSwithBrake        =    0;        //    Enable if you like to use S4+JoyY for Nosewheel steering as an analog brake with Rudders for Differential Braking.  DiffBraking_Enabled must be 2.  Default is 0.
//        AnalogBrake_Warbird    =    1;
//        WH_SC_SetRange        =    0;
//        }
//else 
CougarToeBrakes = 0;    //feature now force-disabled

SetMicSw(TS3_DX);
SetCommSw();


Init_Run = 1;        //set to 1 for first run of profile
AcftArrayInit();
DCS_Global();
if ((TARS > 0) & (TARS_PTT_Common > 0)) TARS_Init();    //initializes radio cycle array for CommonPTT users
DCS_Init();

if ((ProfID > 3999) & (ProfID < 5000))
        Gear_Ind_Init(GearDn_Ind_Default_IL2,FixedGear,Helicopter,AirBrkFlash);
else    Gear_Ind_Init(GearDn_Ind_Default,FixedGear,Helicopter,AirBrkFlash);    //Initializes default Gear indication (LMFD LED 2 for gear state).

}


//            Event Handler

int EventHandle(int type, alias o, int x)
{
   
    DefaultMapping(&o, x);


    //add additional event handling code here
    

[Home Fries]

@DaveMoi

I tested your configuration with both the Warthog stick/TQS throttle as well as my cougar stick on the WH base.  Everything checked out.

 

There is one exception that you should know regarding VR: since you use VR, the NWS button (S1) defaults to VR Zoom.  S3+S1 does the NWS functionality for VR users.  There is no canopy cycle mapping for VR.

[Home Fries]

Everyone,

 

The server should be back up.  Please post if you still have any update issues.

[DaveMoi]

@Home Fries

 

Now I feel silly  I always started with the "dark and cold" instant mission and tested the Canopy and trigger zoom to see if the script was working. 

Really sorry to waste your time, I somehow missed the fact that those two mappings are not available in VR.

 

Thank you very much for your help, I will "dive in" again and manually map the canopy toggle to one of the buttons on my trackball...

[Home Fries]

Oh the other thing is that TriggerZoom is disabled while the logical gear state is down.  This is to prevent inadvertent zooming while on final.

[EvilTodd]

Hi All,

 

I have a question about the CTS profile for AV-8B.  I just updated to the new version of CTS (including loading the latest AB8B .lua's).  The Sensor Select Switch (SSS) commands changed in the DCS control profiler changed to LWin+U/I/J/Y.  But actuating the SSS on the stick doesn't seem to work for the LWin-modified commands.

 

Looking at the device analyzer, pressing the SSS on the stick sends commands modified with "LMENU" (except left, which still sends a LShift Y).  What keyboard key corresponds to "LMENU"?  I can't find it on the Target Configurator virtual keyboard for assignment.

 

Is there any way to modify the CTS script that is loaded into the Target configurator, or is that too far in the weeds?

 

Thank you for your help!  CTS is amazing!

[Home Fries]

2 hours ago, EvilTodd said:

I have a question about the CTS profile for AV-8B.  I just updated to the new version of CTS (including loading the latest AB8B .lua's).  The Sensor Select Switch (SSS) commands changed in the DCS control profiler changed to LWin+U/I/J/Y.  But actuating the SSS on the stick doesn't seem to work for the LWin-modified commands.

 

Looking at the device analyzer, pressing the SSS on the stick sends commands modified with "LMENU" (except left, which still sends a LShift Y).  What keyboard key corresponds to "LMENU"?  I can't find it on the Target Configurator virtual keyboard for assignment.

With exception of SSw Left (which as you indicated uses LShift+Y), all SSw directions should use LAlt, not LWIN.  I remapped from LWIN even before DCS 1.5.8.  I also confirmed that the TARGET AV8B kb v253N.diff.lua and TARGET AV8B kb v253R.diff.lua files are correct.  Be sure you add the keyboard diff.luas as well as the one for the HOTAS.

 

If you're getting LMENU instead of LAlt, that might be something else entirely, but the code is correct.

 

Quote

Is there any way to modify the CTS script that is loaded into the Target configurator, or is that too far in the weeds?

That's in the weeds, especially with Hat3 that calls a subroutine.  Just. Don't. Go. There. 

 

Quote

Thank you for your help!  CTS is amazing!

Thank you!

Edited December 24, 2020 by Home Fries

[Madone]

I wanted to try playing around with your profiles but I got none of this to work, followed every single step correctly to install but when I launch the script it works 1 out of 3 times for some reason, device analyser would crash because of fast service, joystick and throttle axis randomly "hang". I mean this is just the worst, I don't know if it's something I changed in the options that messed it up but I double checked, switched usb ports all morning I can't see anything wrong?

Edited January 2, 2021 by Madone

[angrymancunian]

5 hours ago, Madone said:

I wanted to try playing around with your profiles but I got none of this to work, followed every single step correctly to install but when I launch the script it works 1 out of 3 times for some reason, device analyser would crash because of fast service, joystick and throttle axis randomly "hang". I mean this is just the worst, I don't know if it's something I changed in the options that messed it up but I double checked, switched usb ports all morning I can't see anything wrong?

 

Worth checking that all the power management bullshit windows does with USB's is turned off I had a right old wild goose chase figuring out a similar issue when I updated CTS not long ago.  Check the power plan for USB selective suspend is off and then ensure you untick the same under properties for each device in device manager for all your USB HIDs and Thrustmaster Virtual Controllers.  Fast service can be troublesome if you use things like MSI Dragon Centre to clear out RAM usage.

 

CTS is awesome, its the single most useful tool for my Thrustmaster gear, much better than doing it from scratch, stick with it, its worth reading all of the manual too, lots of tips in there!

[Madone]

@angrymancunianyeah I read all the manuals both from thrustmaster and CTS, I'm sure it's good stuff as on the paper it had everything I needed especially if I can customize some bindings. I got a simple setup, just a TM Warthog but the combined device was just acting strange with no joystick input. I guess it's a target issue cause it works all fine otherwise but I'll check the usb stuff even tho I'm sure I disabled all the saving crap.

Edited January 2, 2021 by Madone

[=36=Witcher]

Hey, just a quick one: does the number of enabled profiles in CTS actually matter for the risk of hitting the stack limit? In other words, can I safely enable 10 modules even if I only use a couple of them most of the times?

[Home Fries]

 

8 hours ago, =36=Witcher said:

Hey, just a quick one: does the number of enabled profiles in CTS actually matter for the risk of hitting the stack limit? In other words, can I safely enable 10 modules even if I only use a couple of them most of the times?

Doubtful.  I have reduced stack usage by commenting out obsolete routines, so that leads me to believe that it's the code available, and not the code in use.

[=36=Witcher]

28 minuti fa, Home Fries ha scritto:

 

Doubtful.  I have reduced stack usage by commenting out obsolete routines, so that leads me to believe that it's the code available, and not the code in use.

Ok, I'll build my profile only for the modules I'm actually using then.

[Home Fries]

36 minutes ago, =36=Witcher said:

Ok, I'll build my profile only for the modules I'm actually using then.

Are you getting stack issues?  In general, I don't recommend commenting things out because I often share routines across modules.  Unless of course you just mean selecting modules that you have in the GUI, which is what is intended all along.

Edited January 6, 2021 by Home Fries

[=36=Witcher]

No, I'm not experiencing any issue right now, but I wanted to play on the safer side. Yes, I'm talking about selecting them in the CTS main menu... Maybe a neat idea would be to implement some sort of "customizable sets" in the UI in order to have a quick selection of the profiles in different scenarios... but I don't know how many people would use that

[Home Fries]

There is really nothing wrong with selecting every module, even if you don't have every module.  This is mainly a convenience feature to filter the database options and profile selection to make things easier.

 

I don't see any point in having sets; if you have the module, select the module.

Edited January 6, 2021 by Home Fries

[=36=Witcher]

1 minuto fa, Home Fries ha scritto:

There is really nothing wrong with selecting every module, even if you don't have every module.  This is mainly a convenience feature to filter the database options and profile selection to make things easier.

 

I don't see any point in having sets; if you have the module, select the module.

 

 

But then you don't you have an higher risk in incurring in stack limits? Perhaps I misinterpreted your answer?

[Home Fries]

No.  The code is read into the stack regardless of whether the module is enabled.

Edited January 6, 2021 by Home Fries

[=36=Witcher]

 

29 minuti fa, Home Fries ha scritto:

No.  The code is read into the stack regardless of whether the module is enabled.

 

Ok, so I totally misunderstood your first answer  Thank you!