Ice Posted February 10, 2006 Posted February 10, 2006 1.12 Is now available on the downloads page. Couple of things you need to know. If Track Ir is not functioning. Delete 2 TrackIR Files. One in the "Input Folder, The other in "Config" folder. Then start your sim. It should be fine now. If you have made a copy of your lockon before patching, Hyperlobby may still look for the 1.11 exe. If this is the case, disconnect from Hyperlobby and When reconnecting hold down CTRL+SHF this will bring up the adress to exe box. Copy the adress from 1.12 lockon exe shortcut into the HL adress box and remove the inverted commas (") from the path line and press start. You will need to reassign Controls as a new system is used Thanks to ED and all the testers for the big effort getting the final patch for Flaming Cliffs out. 1
Sleek Posted February 10, 2006 Posted February 10, 2006 jeez getting 11kb/sec..should get the patch in an hour or so! :confused: Be Good..Be Strong..:drink: ;)
Pilotasso Posted February 10, 2006 Posted February 10, 2006 try another mirror. I got mine at 100KB/s .
Sleek Posted February 10, 2006 Posted February 10, 2006 I tried all of em..no bother really..should be worth the wait :) cya in HL soooon :horseback EDIT: Ok got it and my TIR3 pro works fine..thx for the tip anyhow Ice ;) Be Good..Be Strong..:drink: ;)
Vosxod Posted February 10, 2006 Posted February 10, 2006 You will need to reassign Controls as a new system is used What does this mean? I hope I dont have to reassign all my keysettings...
504 Wolverine Posted February 10, 2006 Posted February 10, 2006 What does this mean? I hope I dont have to reassign all my keysettings... Unfortunatley, yes. A trade off in getting the new controller system. [/url]
Force_Feedback Posted February 10, 2006 Posted February 10, 2006 I had some violent stutters ingame, while normally I had like 40-60 fps at high flight and 29fps in low level flight in the Su-25T. I recently upgraded my CPU, mobo and GPU CPU: 3700+ @ 2.3Ghz (Got a Hyper 48 cooler, and a quality PSU, temp at load is 36 degrees C) GPU: Radeon 9800XT @ stock speeds 768 mb memory (which is a bit crappy); 1x512mb 333mhz and 256 mb 266mhz What could be wrong with FC in 1.11? I play for like 5 minutes, but after that the fps drops to 3fps and even music playback slows down. Maybe it's some config error, since I haven't had such problems with FC before, only low fps due to a crappy CPU. Installing 1.12 now!!! Creedence Clearwater Revival:worthy:
Lixma 06 Posted February 10, 2006 Posted February 10, 2006 Quick tip, dunno if it was just specific to me. Even if the input section shows the key or button is set how you want it = re-map it anyway.....for instance if you had the Laser on 'L' re-map it to 'L' again. After applying the patch I thought the keys would all be reset to default in-game. Perhaps they are 'underneath' but your current assignments are displayed as if nothing had been reset.
Force_Feedback Posted February 10, 2006 Posted February 10, 2006 Nevermind, I think the stutters are gone, fps doesn't seem to have risen, and the R-77 sucked ass (only played one mission, me vs 3 F-16s with 2x aim9 and ECM) Creedence Clearwater Revival:worthy:
emenance Posted February 11, 2006 Posted February 11, 2006 234 kb a sec when almost done in USA at first 400 something . a cha cha cha cha !!!!!!!!!!! Why in the hell could this have waited till next weekend ?????????? jk TY ED Asus P8Z68-V GEN3/ 2500k 4.4ghz / Corsair 64gb SSD Cache / Corsair 8g 1600 ddr3 / 2 x 320gb RE3 Raid 0 /Corsair 950w/ Zotac 560TI AMP 1gb / Zalman GS1200 case /G940/
Prophet_169th Posted February 11, 2006 Posted February 11, 2006 If you have controller issues like axis that stop working, then work again, it may be a similar problem to the TrackIR problem.
Guest IguanaKing Posted February 11, 2006 Posted February 11, 2006 Approx. 340KB/sec DL average, less than 3 minutes. :icon_supe Yup...I had to reassign my buttons/axes on my CH setup (I'm not using a profile yet). I also had to reinstall a couple of mods using ModMan, but that's ok, considering the fact that I followed NONE of the recommendations for a good patch install...but it patched flawlessly anyway. :D
ARM505 Posted February 11, 2006 Posted February 11, 2006 Gee, they've released this at the same time as the new IL2 patch... AGAIN!! Do these guys synchronise this or something?! I'm not complaining mind you, just seemed odd.
A.S Posted February 11, 2006 Posted February 11, 2006 Thx man Thx ICE for the info. [sIGPIC][/sIGPIC]
DarkStar Posted February 11, 2006 Posted February 11, 2006 I'm having serious troubles with connecting to any Hyperlobby game.. I end up at the screen where I change my connection speed and server adress etc. I try to press START but nothing happens.. help!?
Ice Posted February 11, 2006 Author Posted February 11, 2006 Check at the Main screen of The Sim that it does actually say 1.12 :)
Guest IguanaKing Posted February 11, 2006 Posted February 11, 2006 How about that RWR issue...what say you, Ice? Just curious. :D
DarkStar Posted February 11, 2006 Posted February 11, 2006 Hey Ice, it defenitively says 1.12 there. I've also tried your hyperlobby tips... dunno what to do..
Krendel Posted February 12, 2006 Posted February 12, 2006 If it's not too late...you don't need to reassign controls.At the first startup the game creates default config file for your joystick.But it keeps you old config from versions 1.1 ,1.11.Your old config file looks like Joy_name.ini.With the introduction of new system configs will look like Joy_name_GUID.ini where GUID is a unique identifer.All you have to do is to go to the Lockon\Input\.. and rename your old config in compliance with the default config created by the game
Recommended Posts