All Activity

After DAYS of working at this, I have FINALLY found a workaround that I can reproduce with 100% success rate: Workaround for AFCS failing after repair on MiG-29A (Full Fidelity) IMPORTANT: When going for a repair at an airfield, don't try to realign gyros or nav or anything. Don't flick any switches after landing other than exactly what I say here: Shut off engines (right alt + home, right shift + home) Turn ground power on Repair Turn ground power on again (cuz it disconnects when repairing) Turn engines back on CTRL + T to neutral trim Left Alt + 9 to redo AFCS BIT test If you do anything else (change gyro settings, realign nav, turn off the afcs switch and turn it back on, it WILL break and be unrecoverable). Here is a track with proof of multiple consistent reproductions of this workaround: https://www.mediafire.com/file/1dddac66n3uon2f/Through_The_Inferno_CCS_v2.3.8-20250921-233402.trk/file

Alas, buying EA in most cases achieves the opposite.

Still unresolved.

It just don't work. But in CC, it just works. radarneverlock.trk

I've also used a lot of tinted visors on motorcycles, and yes the effect is overdone. That being said, you do, in certain conditions get *some* reflections on the inside of your visor. In real life, due to focusing ability at different distances (which cannot be done in VR), it is also not as distracting. I do like the 'real object in real lighting conditions' idea, but it'll have to be toned down (as another poster said, it's as if light is coming in from above and behind, which would not be the case), as well as some kind of simulation of focal effect to make it less 'in your face'.

Noticed the same on 4YA. Weird. I still need to test some things which I might have used to get it to work....

You missed part of the test. You need to take damage and then repair. And this is in multiplayer. Here is a multiplayer track where this is encountered.... constantly, sorry its too large for the forum upload. https://www.mediafire.com/file/lrajiyiruh0u0pw/Through_The_Inferno_CCS_v2.3.8-20250921-211620.trk/file I've tried all kinds of alternate methods like realigning gyros, nav prep, and resetting AFCS. NOTHING fixes it whatsoever. We tried hundreds of combinations that would literally be gigabytes of tracks. I included what I can. Every single user I have asked to repair their MiG-29A has been unable to get the AFCS to work after. Every single one. Additionally, ive only managed to get it to work ONCE after a repair, and it was by turning on ground power before repair, not touching anything at all, and then just starting engines back up, CTRL T to neutral trim, and then Left Alt 9 to rerun the bit test for AFCS. Thats the only way I got it to work. This is a big pain in the butt of an issue. I should be able to realign my nav and change other things without fearing that AFCS will break for no reason.

The internet is an ego damaging place (what I mean is that there will ALWAYS be somebody who criticises, so don't take it personally). Thanks for trying to put information out there. If it were me I'd use an AI voice, or subtitles (purely to spare myself the irritation of getting needless criticism, as well as anonymity) Regarding the OPT setting on the range prediction (which currently just shows the same range as TACT or whatever the 'current' setting is called) - any idea what ideal parameters it should use? I'm assuming there's a 'best range' table or something along the best cruise range table you mentioned? And when the manual I have mentions 'fuel reserve', do you know what value that is? I haven't tested enough to see if it just flames out when it reaches zero. I should have looked, because I did flame out due to fuel starvation while playing online. Managed a glide approach onto a field, no issues - which also brought the question, how are the hydraulics powered with the engines shut down? Anyway, it flies really nicely, so that was a help.

В редакторе миссий нет возможности выставить предопределенные частоты по каналам АРК (Пилот: Игрок, Самолет: Миг-15бис, Карта: Крым). В мануале показано, как это сделать. Но в редакторе (2.9.20.15010, 2.9.19.13478) кнопки настройки частот нет. В мануале показан пример со Steam версией игры. Может дело в этом? Или я что-то делаю не так?

If you still had the Helios Patches applied, or you had modified those specific files manually to export, then the update would have returned them to their original, non-exportable format. Either re-install the Helios patches or re-do your modifications to those files, since they aren’t exportable natively by ED.

These are from an older iteration but I am consistently struck with wonder everytime I fly with Bandit's mod... Happens to the best of us

thats alot of water, wow

ИМХО у квеста беда с ПО, как буд-то топором его делали, да так и оставили. Тоже с ним намучался.

Limitation of MiG-29. It may become possible when COOP is implemented

You probably just changed modes at wrong time. Like for example change from HPRF to MPRF only under 30-35 km max.

odd, why? is this a bug or a limitation of the mig-29?

No, you would have to relock

How am I getting so many negative comments about my voice? Sure I might be over enthusiastic sometimes…….

Here's a second (shorter) example track illustrating the problem(s)... 2ndErraticTWS.trk

if you lock with irst, can't you just immediately switch to radar and then fire r27er?

Same. Log shows same stacktrace dcs.log-20250922-024324.zip

That works, thank you! This is very strange because all other Helicopters it says "rudder trimmer" or "pedals trimmer" or "do not trim". Only on AH-64D you have to somehow figure out that "pedals with FFB" is the way to disable rudder trimmer I can now keep this thing stable, but boy is it twitchy and nimble compared to all the other whirlybirbs! null nullnullnull

Thank you, this is related to the laser cooling? I must be doing something wrong. I am using the guide, for every weapons employment it says to change the laser into "standby". nullDo I have to switch if off after every shot? How can I do that? I already have it set to English cockpit, but it still shows HUD in Russian. null

Here you go.dcs.log It just happened again tonight with a GBU-24. The game crashed this time too. It happens when I bomb a certain spot on the Caucasus map by a bridge. It might be a problem with one of the units that's exploding too. Here's where it's happening if that helps: I'm trying a repair in the DCS updater as a troubleshooting step. I'll try it again tomorrow. Thanks!