All Activity

Ugra did respond to your thread and you refusing to provide a track are not helping either.

Hi...another small bug,minor detail. ABRIS RMI2 pointer (Red pointer on ACR and HSI page)can show "TO STP" "FROM STP" and "RADIO" information depending on setting. It's default to "RADIO" which shows information from AKR-22 ADF When no ADF signal is received,it will not showing up of coures. It works fine if u change the setting with ADF signal being received. Also if u are already in "TO STP' or "FROM STP" mode,and then the ADF signal is gone,the RIM2 pointer will continue working fine. But if u change it's setting from "RADIO" to "TO STP' or "FROM STP" when no ADF signal is received,the RIM2 pointer will not show up,until u have ADF signal being received and got the setting cycled back through "RADIO". RIM2 not showing up.trk Just a minor detail,hope for a fix when free,thanks.

That's your reason? That's possible devs' problem and I proposed that any such event should be written into debriefing to easily find out what happened. Realistically you should check it after the mission of course.

Hi guys, as you know we’re still working on our upcoming Alphajet mod, and we don’t necessarily have the time to work on the Bronco. One of the recurring issues with it was the jittering wheels. A guy named Moran found a way to fix the problem while waiting for a future patch. I’m sharing here a screenshot of what needs to be done. Thanks to him ! Enjoy it

the dim light control knob also the damage model doesn't get effected when you hover into the radar dishes.

I see it the same way. we need selectable pylons!

The DCS: F-16C Viper is based on the United States F-16CM Block 50, roughly M4.2+, which operated in the 2007 timeframe. The DCS: F/A-18C Lot 20 is based on the United States Navy / US Marine Corps F/A-18C in the 2002(ish) time frame. This is from modules' subforum descriptions and FAQ. And you're right. Yeah, no. Only on paper.

Lessay & Stoney Cross are 6,000ft, I think.

Do you have random failures enabled in settings? Maybe this caused the loss of airspeed. Not flown on Afghan map in icy condition but did a lot on kola map up to -15 degree Celsius and never realized a loss of airspeed on the IHADDS.

Can you perhaps upload your mission so we can take a look? Can you show how you set up the frequency with all the advanced waypoint action? And why does it need to be two in the same group? Why not just copy the tanker?

This right here. I treat it as if DCS WW2 development is feature complete and no new development is planned or expected.

That's what she said.

Hi, I am very new to DCS and am just trying to get to grips with the f16 module which I recently purchased. I seem to have screwed up something because the hat view which worked previously now won’t function properly. It’s gone from a smooth view to non existent or jerks sporadically. The other SU training and f4 E work as normal. Any ideas what’s wrong - apart from me being a clutz Thank you.

Interesting, I've been trying to make a Jericho mission myself, and so far this is my best effort creating a stand-in for Amiens Prison. See the wall and machine gun bunker at the bottom? That's what makes it a prison! Eh, eh, genius, amirite? Now, I know what you're thinking, "damn, I wanted realistic but that's a little TOO realistic ... if any WW2 veterans see it, their PTSD may get triggered" ... but I decided to take the risk, and go all-in on immersiveness. If you look real hard, you might just spot George and Weezy Jefferson on the top floor, in their dee-lux apartment, in the sky high-high. Apparently, they were both spies for the frogs. Who knew? Except for Florence, that is. Who do you think turned them in? See? With ingenuity like this, I hardly think Ugra needs to trouble themselves with making an Amiens Prison. I mean, I highly-doubt a better one could be made.

Can we do anything in flight to combat this drift? I know of FIX and A-CAL options on ICP. Should we re-align INS in Air mode ? Or are there some other solutions ? JDAM will already hit slightly off from target, even if mark point is precisely sitting on a ground vehicle. I tested this. In real life, JDAM has 5 meters radius where it will hit. After all it targets INS coordinate and coordinate is not point, but area. So do not engage tanks and maybe heavy armored vehicles with JDAM. For pin point accuracy use laser guided bombs and mavericks.

True. PGM stands for probability after all. But I always go to PGM2 just in case.

After summer break, I upgraded to 1.41.2, reinstalled QV Companion (just as a precaution) abd got everything to run smooth again ar 72Hz without having to change anything. Tried PP Quadviews (while deactivating QVC), but I had big problems only achieving 35 FPS and a lot of stutter. But one thing bothers me - pressing volume + button on the Super does not open the Pimax Menu anymore, just keeps increasing volume. @Calvin.PimaxDo I habe to activate it in the settings or is this mandatory feature gone?

I use the TMS switch in all trimmings, as it is more reachable, while the conventional trim hat I use it for POV look-around. Wish it has the sensitivity setting like that in the MSFS. Or perhaps DCS could have made it in finer step for each push.

Okay roger that, will try it. But I hope it won't affect the slew rate in other sensors too much.

Thanks much folks. I was under impression the GPS/INS in F16 is similar to the EGI in the F15E, which gives exact location plotting. That being the case, does it mean for JDAMs they would all hit a little off from targets too? Or they should be spot-on since they are guided via satellite GPS?

I'm trying to make a mission, and in part of it, the Allies try to cross the Seine just south of Le Havre in Higgins Boats. Problem is, it won't work because the estuary is so shallow ... too shallow even for Higgins Boats. The thing is, I thought those boats only had a draft of like, 4 feet? I know nothing of the water navigation in that area, Is the Sienne estuary really that shallow?

Yes, I do have - the default 'F' key and I have a key bind on my Xbox controller. They both work only after I 'physically' press the switch in cockpit with the mouse. Just checked once again - 'Cold and Dark' missions as well with 'Free Flight' for F/A-18 the switch is movable with a key bind from keyboard ('F' key) and controller. Missions - 'Ready on the Ramp' as well 'Takeoff from runway' in Mission Editor - the switch is active after mouse click!

hey pilots, I have a small problem with setting up multiple tankers in the same group. I'm building a mission in which I need pilots to perform air refueling together and simultaneously, so I created a tanker group in the mission with 2 tankers; let's call them Arco 1-1 and Arco 1-2. Since they are in the same group, I can only have one radio frequency, i.e., 280.000. Then I realized that I can set a frequency for each unit in advanced waypoint actions (AWA); hence, I created 2 different frequencies for each unit, 280.250 and 280.750, but when I jump into the mission, I can only see and talk to Arco 1-1 in the comms menu at 280.000! It totally ignores the unit frequencies. Is there a trick to make this work? Am I doing something wrong, or is this a DCS limitation?

I think the simplest no-cost way would be to use https://www.autohotkey.com/ to build some macros e.g. set Ctrl-F1 or whatever to run through that sequence, without having to build anything. I guess you're talking about Voiceattack which allows for macros without having to use the voice part. Assume you can link that to a button box with dcs-bios or whathaveyou. The elgato streamdeck lets you build macros for its big friendly buttons through its software, and you can have pretty much infinite commands and profiles for whatever scenario.